• Radiation Oncology Journal
• /
• 제11권2호
• /
• pp.455-461
• /
• 1993

Experimental measurements of dose characteristics with pentagonal applicator at nominal energy of 4, 6, 9, 12 and 15 MeV electron beam were performed for intraoperative radiotherapy (IORT) in ML-15MDX linear accelerator. This paper presents the percent depth dose, surface dose, beam flatness and output factors of using the IORT applicator in different electron beam energy. The output factor showed as a 24 percent higher in IORT applicator than that of reference $10{\times}10cm^2$ applicator. The surface dose of using the IORT applicator showed 7.7 and 2.7 percent higher than that of reference field in 4 and 15 MeV electron beam, respectively. In our experiments, the variation of percent depth dose was very small but the output factor and flatnees at 0.5 cm depth have showed a large value in IORT applicator.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2064-2075
• /
• 2011

In this paper, robust multi-level perturbation and observation (MLPO) maximum power point tracking (MPPT) control are presented of the environmental change including the solar radiation and temperature. Because the maximum power point of the Photovoltaic (PV) is changing according to the solar radiation and temperature, the technology which traces the maximum power point in order to increase the power efficiency is recognized as the very important part. The general requirement for the MPPT is that system is simple, the cost is inexpensive, the PV tracking function and output change are small. Conventional perturbation and observation (PO) method is a simple system but there is the disadvantage that an efficiency of system becomes low. In addation, the incremental conductance (IC) control is required expensive CPU because of a large of calculations. In order to solve this problem, in this paper, the MLPO MPPT control using the method diversifying the step size according to the environment condition is presented. The validity of the MLPO method presenting from this paper is proved through analyzing the solar power generation output error at the steady state.

• 대한방사선치료학회지
• /
• 제11권1호
• /
• pp.6-10
• /
• 1999

The field size can be beam output, therefore MonitorUnit can be varied due to field size dependence The purpose of this study is to evaluate and compare the dose variation according to exchange of collimator The measurements were perfomed with Wellhofer dosimetry system(water phantom. ion chamber. electrometer. system controller. build up cap. etc)and two types of linear accerlerator (Mevatron KD, MevatronMX) Scatter can be affected to field size dependence and scatter correction is separated into collimator and phantom components, scatter components can affect by exchanging of collimator Measurements of collimator scatter factor(Sc) was done in air with build up cap. 1)Square field (5cm2 to 40cm2) was measured 2)and then keeping the upper jaw constant at loom and varing lower jaw from 5cm to 40cm, 3)keeping the lower jaw constant at 10cm and varing upper jaw from 5cm to 40cm Measurements of total scatter factor(Scp) was done in water at Dmax as the procedure of collimator scatter factor measurements in water Dmax The total scatter factors were obtained to the following equation(Sp=Scp/Sc) The measured data is normalized to the data of reference field size($10{\times}10$), rectangular field is inverted to equivalent field to compare three field size data As the collimator setting is varied, the output was changed In conclusion, the error was obtained small but it must be eliminated if we intend to reach the common stated goal of $5\%$ overall uncertainty in dose determination

• 한국의학물리학회지:의학물리
• /
• 제29권4호
• /
• pp.137-142
• /
• 2018

This study aimed to evaluate and verify a process for correcting the extended source-to-imager distance (SID) in portal dosimetry (PD). In this study, eight treatment plans (four volumetric modulated arc therapy and four intensity-modulated radiation therapy plans) at different treatment sites and beam energies were selected for measurement. A Varian PD system with portal dose image prediction (PDIP) was used for the measurement and verification. To verify the integrity of the plan, independent measurements were performed with the MapCHECK device. The predicted and measured fluence were evaluated using the gamma passing rate. The output ratio was defined as the ratio of the absolute dose of the reference SID (100 cm) to that of each SID (120 cm or 140 cm). The measured fluence for each SID was absolutely and relatively compared. The average SID output ratios were 0.687 and 0.518 for 120 SID and 140 SID, respectively; the ratio showed less than 1% agreement with the calculation obtained by using the inverse square law. The resolution of the acquired EPIDs were 0.336, 0.280, and 0.240 for 100, 120, and 140 SID, respectively. The gamma passing rates with PD and MapCHECK exceeded 98% for all treatment plans and SIDs. When autoalignment was performed in PD, the X-offset showed no change, and the Y-offset decreased with increasing SID. The PD-generated PDIP can be used for extended SID without additional correction.

• 한국의학물리학회지:의학물리
• /
• 제25권3호
• /
• pp.185-192
• /
• 2014

이 연구의 목적은 본원이 보유하고 있는 선형가속기들의 출력 특성을 Shewhart-type Chart, EWMA Chart, 공정능력지수 $C_p$와 $C_{pk}$을 이용한 통계적 분석으로 품질보증에 대한 결과를 평가하고자 한다. 측정값은 의학물리사에 의하여 2012년 9월부터 2014년 4월까지 매월 측정된 각각 치료기들(21EX, 21EX-S, Novalis Tx)의 출력측정값을 사용하였다. 치료기들의 출력 특성은 IAEA TRS-398의 가이드라인을 따랐으며, 측정 에너지는 광자선 6 MV, 10 MV, 15 MV와 전자선 4 MeV, 6 MeV, 9 MeV, 12 MeV, 16 MeV, 20 MeV였다. 매월 측정하여 교정한 출력특성에 대한 통계학적 분석이며, 가중인자와 측정값의 관리한계의 폭은 ${\lambda}=0.10$, L=2.703로 계산되었으며, 공정능력 $C_p$와 $C_{pk}$는 모든 선형가속기(21EX, 21EX-S, Novalis Tx)의 모든 에너지에서 1이상이었다. Shewhart-type Chart를 통하여 출력선량의 측정값의 큰 변화점을 찾을 수 있었고, EWMA Chart를 통하여 출력선량의 측정값의 미세한 변화점을 알아 볼 수 있었다. 본원의 치료기의 공정능력지수 $C_p$와 $C_{pk}$를 통하여 21EX가 2.384와 2.136, 21EX-S가 1.917과 1.682, Novalis Tx가 2.895와 2.473으로 Novalis Tx가 가장 안정적이고 정확한 출력특성을 나타내고 있었다.

• 한국태양에너지학회 논문집
• /
• 제34권5호
• /
• pp.11-22
• /
• 2014

It is usual to determine silver-town location by people's experienced knowledge or intuition considering many different type of thematic variables simultaneously. This paper is primarily intended to locate sunny silver-town according to catchment-wide solar radiation as single key variable. GIS based solar simulation realistically identified catchment-wide solar radiation in the study area using large scale spatial precision. More than 90% over the worst catchment were identified shadow surfaces while the optimal catchment was heavily covered by sunny radiation surfaces. It is confirmed that standard GIS technology can offers the viable method of measuring and comparing the catchment-wide solar radiation. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in locating the sunny silver-town; delineation of catchment boundary, solar simulation, catchment-wide comparison etc. They could be used as an evidence to determine sunny catchment in comparison with other catchment, based solar simulation. It is anticipated that this research output could be used as a valuable reference to confirm the potential of introducing the new concept of "catchment specific solar radiation" to support more scientific and objective decision-making in the process of locating silver town.

• 한국의학물리학회지:의학물리
• /
• 제31권3호
• /
• pp.124-134
• /
• 2020

Here we review the evolutionary history of radiation therapy technology through the festschrift of articles in celebration of the 30th anniversary of Korean Society of Medical Physics (KSMP). Radiation therapy technology used in clinical practice has evolved over a long period of time. Various areas of science, such as medical physics, mechanical engineering, and computer engineering, have contributed to the continual development of new devices and techniques. The scope of this review was restricted to two areas; i.e., output energy production and functional development, because it is not possible to include all development processes of this technology due to space limitations. The former includes the technological transition process from the initial technique applied to the first model to the latest technique currently used in a variety of machines. The latter has had a direct effect on treatment outcomes and safety, which changed the paradigm of radiation therapy, leading to new guidelines on dose prescriptions, innovation of dose verification tools, new measurement methods and calculation systems for radiation doses, changes in the criteria for errors, and medical law changes in all countries. Various complex developments are covered in this review. To the best of our knowledge, there have been few reviews on this topic and we consider it very meaningful to provide a review in the festschrift in celebration of the 30th anniversary of the KSMP.

• ETRI Journal
• /
• 제40권3호
• /
• pp.303-308
• /
• 2018

This paper proposes a simple yet accurate method for estimating the antenna correlation coefficient (ACC) of a high-order multiple-input multiple-output (MIMO) antenna. The conventional method employed to obtain the ACC from three-dimensional radiation patterns is costly and difficult to measure. An alternate method is to use the S-parameters, which can be easily measured using a network analyzer. However, this method assumes that the antennas are highly efficient, and it is therefore not suitable for lossy MIMO antenna arrays. To overcome this limitation, we define and utilize the non-coupled radiation efficiency in the S-parameter-based ACC formula. The accuracy of the proposed method is verified by the simulation results of a 4-port highly coupled lossy MIMO array. Further, the proposed method can be applied to N-port arrays by expanding the calculation matrix.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.59-64
• /
• 2010

We examined the accuracy and efficiency of phantom by applying the designed phantom in order to check daily quality assurance easily by objective criteria and to confirm daily quality assurance of linear accelerator, simulator, and CT-simulator. The results of 10 weeks of linear accelerator output dose using American Association of Physicists in Medicine(AAPM) daily quality assurance guide were measured within ${\pm}1%$ of error. Mechanical check of laser alignment, optical distance indicator(ODI), CT scanner laser and alignment of gantry lasers with the center of imaging plane were measured within ${\pm}1mm$. Daily average working time for daily quality assurance of radiation therapy equipments was 38 minutes. The designed phantom was easy to install and daily quality assurance was possible with only one installation. The aspects reproducibility and efficiency as well as accuracy of quality assurance were excellent.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.105-109
• /
• 2016

Background: For an accelerator-based BNCT, we have fabricated a new detector consisting of quartz optical fibers that have excellent radiation-resistant characteristics. Materials and Methods: The developed detectors were irradiated at Kyoto University Research Reactor. Results and Discussion: The experimental results showed that the new detector had good output linearity for the neutron intensity, and the response of the new detector did not decrease during the irradiation. Conclusion: The new detector consisting of quartz optical fibers can be applied to measurement of neutron field of an accelerator-based BNCT.