• Title/Summary/Keyword: Radar Transmitter

Search Result 90, Processing Time 0.121 seconds

단거리 차량용 초광대역 레이더 송신기의 스펙트럼 분석 (Spectrum Analysis of UWB Radar Transmitter for Short Range Automobile Applications)

  • 고석준
    • 대한임베디드공학회논문지
    • /
    • 제10권2호
    • /
    • pp.57-64
    • /
    • 2015
  • In this paper, we propose structures and power spectral densities of UWB radar transmitters of Short Range Automobile. While the conventional transmitters did not consider interferences from self and other automobiles, the proposed method of this paper can minimize interferences. First, we compare a structure of the proposed method with pulse train and pulse compression method. Then, by using mathematical analysis and computer simulations, we show that the proposed method is superior to others. Also we can set proper parameters in UWB radar's transmitter through the numerical method of mathematical results.

수풀투과를 위한 초 광대역 레이더의 송수신기 설계 (Design of Ultra Wide Band Radar Transceiver for Foliage Penetration)

  • 박규철;선선구;조병래;이정수;하종수
    • 한국위성정보통신학회논문지
    • /
    • 제7권1호
    • /
    • pp.75-81
    • /
    • 2012
  • 무인 차량의 야지 자율 주행을 위한 목적으로 수풀 뒤쪽에 가려져 있는 장애물을 탐지하고 회피하기 위해 수풀을 투과하여 차량의 전방을 고해상도로 영상화할 수 있는 근거리 초 광대역 영상 레이더의 송수신기를 설계한다. 송신기는 방위각 해상도를 향상시키기 위해 좌측과 우측으로 송신할 수 있도록 두 개의 송신기가 요구되며, 수신기의 경우는 영상을 합성하기 위하여 다채널 수신기가 요구된다. 송신기는 고 전력 증폭기와 채널 선택 스위치 및 파형 발생 모듈로 구성된다. 수신기는 16 채널 수신기, 수신 채널 변환기, 중간 주파수 하향 변환 모듈로 세분화 할 수 있다. 제안한 구조를 제작하기 전에 모델링 및 시뮬레이션 방법을 통해 여러 파라메타를 도출함으로서 가능성을 입증하였다. 그리고 제안한 송수신기를 산업용 부품을 이용하여 제작하고 성능 파라미터를 측정하여 모든 설계 요구 조건이 만족됨을 확인하였다.

HPA MMIC to W/G Antenna Transition Loss Analysis and Development Results of W-band Transmitter Module

  • Kim, Wansik;Jung, Juyong;Lee, Juyoung;Kim, Jongpil
    • International Journal of Advanced Culture Technology
    • /
    • 제7권4호
    • /
    • pp.236-241
    • /
    • 2019
  • This paper will read about a multichannel frequency-modulated continuous wave (FMCW) radar sensor with switching transmit (TX) antennas is developed at W-band. To achieve a high angular resolution, a uniform linear array consisting of 5 switching-TX and 12 receive (RX) antennas is employed with the digital beamforming technique. The overall radar front-end module comprises a W-band transceiver and TX/RX antennas. A multichannel transceiver module consists of 5 up-conversion and 12 down-conversion channels, where one of the TX channels is sequentially switched ON. For developing transmitter, we developed an HPA (high power amplified) MMIC chip for W-band radar system and fabricated a transmitter module using this chip. In order to develop the W-band transmitter, we analyzed the important antenna transition structure from HPA MMIC line to W/G (Waveguide)antenna via M/S(microstrip) and fabricated it with 5 transmission channels. As a result, the output power of the transmitter was within 1 dB of the error range after analysis and measurement under normal temperature and environmental conditions.

상관분석법을 이용한 FMCW 타입 레이더 레벨 트랜스미터의 정밀 거리 측정에 관한 연구 (A Study on the Precise Distance Measurement for Radar Level Transmitter of FMCW Type using Correlation Anaysis Method)

  • 지석준;이준탁
    • 전기학회논문지
    • /
    • 제61권7호
    • /
    • pp.1024-1031
    • /
    • 2012
  • In this paper, FMCW type radar level transmitter using correlation analysis method is implemented for precise distance measurement of cargo tank. FMCW type radar level transmitter is the device for distance measurement which calculates the distance by analyzing the beat frequency, that is, the frequency difference between Tx and RX signal from radar antenna using Fast Fourier Transform(FFT), but compensated algorithm like Zoom FFT is needed for the improvement of the frequency precision because the frequency precision of FFT is limited depending on sampling frequency and the number of sampling data. In case of Zoom FFT, the number of sampling data and noisy signal are the main factor influencing the measurement accuracy of Zoom FFT like FFT. Therefore, in order to overcome the limited environment and achieve the precise measurement, correlation coefficient is used for the distance measurement and the errors of measurement are verified to be in the range of ${\pm}1mm$.

전차 탑재 L-밴드 펄수 도플러 레이더 설계 및 제작 (L-band Pulsed Doppler Radar Development for Main Battle Tank)

  • 박규철;하종수
    • 한국전자파학회논문지
    • /
    • 제20권6호
    • /
    • pp.580-588
    • /
    • 2009
  • 전차 탑재 레이더는 기상에 관계없이 전천후로 대전차 미사일을 탐지하는 능동 방호 장치의 필수적인 센서이다. 본 논문에서는 전차 탑재 레이더의 설계, 제작 및 시험 결과를 제시한다. 레이더 시스템은 안테나부, 송수신부, 신호처리부의 3개의 LRU로 구성되며, 개발 기술은 패치 안테나, SSPA 송신기, coherent I/Q detector, DSP기반 도플러 FFT 필터, 적응 CFAR, TWS 추적기 및 위협 판단을 포함한다. 개발된 레이더 시스템의 설계 성능은 고정 및 기동 시험을 통하여 확인한다.

A 3 ~ 5 GHz CMOS UWB Radar Chip for Surveillance and Biometric Applications

  • Lee, Seung-Jun;Ha, Jong-Ok;Jung, Seung-Hwan;Yoo, Hyun-Jin;Chun, Young-Hoon;Kim, Wan-Sik;Lee, Noh-Bok;Eo, Yun-Seong
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제11권4호
    • /
    • pp.238-246
    • /
    • 2011
  • A 3-5 GHz UWB radar chip in 0.13 ${\mu}m$ CMOS process is presented in this paper. The UWB radar transceiver for surveillance and biometric applications adopts the equivalent time sampling architecture and 4-channel time interleaved samplers to relax the impractical sampling frequency and enhance the overall scanning time. The RF front end (RFFE) includes the wideband LNA and 4-way RF power splitter, and the analog signal processing part consists of the high speed track & hold (T&H) / sample & hold (S&H) and integrator. The interleaved timing clocks are generated using a delay locked loop. The UWB transmitter employs the digitally synthesized topology. The measured NF of RFFE is 9.5 dB in 3-5 GHz. And DLL timing resolution is 50 ps. The measured spectrum of UWB transmitter shows the center frequency within 3-5 GHz satisfying the FCC spectrum mask. The power consumption of receiver and transmitter are 106.5 mW and 57 mW at 1.5 V supply, respectively.

소형 레이더 송신기의 연속 위상을 갖는 주기성 혼합 파형 측정 기법 (Periodic Mixed Waveform Measurement Techniques for Compact Radar Transmitter with Phase-Continuous Signal)

  • 김소수;염경환
    • 한국전자파학회논문지
    • /
    • 제24권6호
    • /
    • pp.661-670
    • /
    • 2013
  • 본 논문에서는 고정 주파수 신호와 선형 주파수 변조 신호가 혼합된 연속 위상을 갖는 주기성 혼합 파형에 대한 선형 주파수 변조 파형의 측정 기법을 제시한다. 다양한 신호 파형을 생성하는 주파수 합성기와 송신 신호를 고출력으로 증폭하는 고출력 증폭기로 구성된 소형 레이더 송신기는 연속 위상을 갖는 혼합 파형을 생성한 다. 첫 번째로 위상이 연속적인 신호를 갖는 소형 레이더 송신기의 구성을 요약하고, 선형 주파수 변조 파형의 비정합에 의한 펄스 압축의 왜곡 특성을 고찰한다. 두 번째로 연속 위상을 갖는 혼합 파형에서 선형 주파수 변조 파형을 측정하기 위해 스펙트럼 분석기를 사용한 측정 기법, 신호원 분석기를 사용한 측정 기법 및 RF 혼합기와 위상 변위기를 사용한 새로운 측정 기법을 기술한다. 마지막으로 측정 결과를 적용한 송신 펄스 파형에 대한 수신 신호의 펄스 압축 결과로부터 측정 기법의 정확도를 확인하였다.

Ku-대역 FMCW 레이더용 전자식 빔 조향 배열 안테나 특성 검증 (Characteristic Verification of Electronically Scanned Array Antenna for a Ku-band FMCW Radar)

  • 정채현;이재민;김민철;이행수;류성준;장성훈
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권4호
    • /
    • pp.65-71
    • /
    • 2023
  • 본 논문에서는 포토닉스 기반의 Ku-대역 FMCW(Frequency Modulation Continuous Wave) 레이더 시스템에 적용할 전자식 빔 조향 배열 안테나 설계, 제작 및 검증 단계에 대해서 기술한다. 본 시스템은 송신부와 수신부가 따로 구성되어 있으며, 송수신부에 동일 안테나를 적용하였다. 설계된 안테나는 2×8 배열 구조를 가지며, Ku-대역에서 동작한다. 16개의 복사 소자 개별로 정재파비 측정 및 배열 복사 소자 간 커플링 영향성을 확인하였다. 또한, 송신 시 수신 안테나로 넘어가는 전력으로 인한 시스템 영향성을 최소화 하도록 송신 안테나, 수신 안테나 간의 분리도 특성을 최적화 하였으며 측정을 통해 확인하였다. 최종적으로 근접전계 챔버에서 16개 복사 소자 각각 빔 패턴 측정하여 데이터 확보 후 빔 합성을 통하여 2×8 배열 안테나의 빔폭, 부엽준위 및 빔 조향 특성을 확인하였다.

능동 배열 레이더 시스템 구현을 위한 반도체형 송수신기 설계 (Design of Solid-State Transmitter and Receiver for Active Array Radar System)

  • 이유리;김종필;이수호;정명득
    • 한국전자파학회논문지
    • /
    • 제21권12호
    • /
    • pp.1335-1342
    • /
    • 2010
  • 본 논문에서는 능동 배열 레이더 시스템에 적용 가능한 S-band, $\bigcirc$ kW급 반도체형 송수신기의 설계 및 제작측정에 관해서 소개하였다. 이득 63 dB, 최장 펄스 폭 200 usec, 최대 duty 10 %, 펄스간 안정도 63 dB의 송신 특성을 가지며, 이득 23 dB, 잡음 지수 3.2 dB의 수신 특성을 갖는다. 펄스간 안정도 분석을 위해 펄스 네트워크 분석기를 수신 모드로 사용하여 별도의 실험 셋업을 구성하였다. 측정 결과, 제시된 특성을 모두 만족하는 것을 확인하였다.

단일 안테나를 사용하는 W-대역 호모다인 FMCW 레이더의 누설신호에 의한 IF 잡음에 관한 연구 (Studies on IF noise caused by transmitter signal leakages of the W-band homodyne FMCW radar with a single antenna configuration)

  • 박정동;김완주
    • 대한전자공학회논문지TC
    • /
    • 제42권7호
    • /
    • pp.49-56
    • /
    • 2005
  • 본 논문은 단일 안테나를 사용한 호모다인 방식의 W-대역 주파수 변조 연속파형 (FMCW) 레이더 송수신장치의 송수신단간의 신호 결합에 의해서 발생하는 누설에 의한 IF 잡음의 특성을 분석하여 이를 효과적으로 제거할 수 있는 방안을 제시한다. 송수신장치에서 발생하는 누설은 LO 신호의 지연시간을 안테나 입력단의 부정합으로 인해서 발생하는 반사전력의 지연시간과 일치시켜 그 크기를 줄일 수 있다. 또한, 중간주퐈수(IF) 잡음은 주기적인 특이점을 가진 신호로써 VCO의 삼각파변조신호와 매우 유사한 스펙트럼 형태를 가짐을 확인하였다. 분석된 결과를 바탕으로 W-대역 호모다인 FMCW레이더 센서를 구현 하였으며, 표적감지 및 비트신호 검출 시험을 성공적으로 수행하였다. 본 분석 결과는 단일 안테나를 사용하는 호모다인 FMCW 레이더의 설계에 유용하게 적용될 것이다.