• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.447-452
• /
• 2013

Vessel traffic system uses multiple sea surveillance radars as a primary sensor to obtain maritime traffic information like as ship's position, speed, course. The systematic errors such as the range bias and the azimuth bias of the two-dimensional radar system can significantly degrade the accuracy of the radar image and target tracking information. Therefore, the systematic errors of the radar system should be corrected precisely in order to provide the accurate target information in the vessel traffic system. In this paper, it is proposed that the method compensates the range bias and the azimuth bias using AtoN information installed at VTS coverage. The radar measurement residual error model is derived from the standard error model of two-dimensional radar measurements and the position information of AtoN, and then the linear Kalman filter is designed for estimation of the systematic errors of the radar system. The proposed method is validated via Monte-Carlo runs. Also, the convergence characteristics of the designed filter and the accuracy of the systematic error estimates according to the number of AtoN information are analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.63-73
• /
• 2021

The radar operated to detect/track aircraft targets is divided into a search radar that operates while the antenna rotating device rotates for the purpose of detecting the target according to the mission characteristics, and a tracking radar that periodically steers and tracks a beam to the predicted position of the target. The tracking radar has a shorter target information acquisition preiod than the search radar. Due to this characteristic, the tracking accuracy is better than that of the search radar, but as the prediction error increases due to the speed error at the beginning of the tracking, there are many cases in which tracking fails at the beginning of tracking due to failure to perform beam steering normally. In this paper, in order to solve the above-mentioned problems, we propose an algorithm for improving the accuracy of track initiation using radial velocity measurements in addition to the position of the measured, and confirm the performance of the proposed algorithm by comparing with the two point differential algorithm

• Journal of Korea Water Resources Association
• /
• v.39 no.4 s.165
• /
• pp.321-334
• /
• 2006

The need for economical and accurate presentations of equivalent radar reflectivity( $Z_e$) data in an orthogonal coordinate system has existed for some time. So, in this study, a fast and efficient procedure has been developed which allows the systematic interpolation of digital reflectivity data from radar space into Cartesian space. At first, QC(Quality Control) of radar data has been executed for extracting uncontaminated Constant Altitude Plan Position Indicator(CAPPI) data. The algorithm is designed so that only one ordered pass through the original Plan Position Indicator(PPI) scan data is necessary to complete the interpolation process. The model can calculate various resolution and altitude reflectivity data for many kinds of hydrological usage.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1211-1220
• /
• 2020

This research detects the features of the bright band (BB) through analysis of the vertical profile of range height indicator (RHI) and the slant range beam profile of plane position indicator (PPI) of the polarimetric radar measurements-horizontal reflectivity (ZH), differential reflectivity (ZDR), and cross-correlation coefficient (ρHV). As a result of the analysis, it is possible to clearly detect the bright band using the polarimetric radar measurements, and it is confirmed that the result is consistent by double searching for the BB using the RHI and PPI scan data at the same time. Based on these results, the accuracy of QPE (quantification of precipitation estimation) can be improved by applying the BB search method by the PPI slant range in this research to large rainfall radars that only scan PPI volumes in the field without RHI observations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1173-1180
• /
• 2013

High Resolution Range Profile-Jet Engine Modulation imagery first introduced in 2005 carries out radar target recognition by localizing the position of the jet engine installed on the aircraft target. This paper presents a new approach for estimating the jet engine position in the HRRP-JEM image based on the eccentricity of a complex signal. It can effectively evaluate the contribution of the JEM component to the radar received signal in a range bin of the HRRP-JEM image. Therefore, the localization is expected to be performed more quantitatively and reliably by pinpointing the range bin corresponding to the jet engine position where the JEM contribution is maximized. The simulation results of realistic aircraft models validated the effectiveness of the proposed concept.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.322-333
• /
• 2012

AESA radar is able to instantaneously and adaptively position and control the beam, and such adaptive beam pointing of AESA radar enables to remarkably improve the multi-mission capability. For this reason, Radar Resource Management(RRM) becomes new challenging issue. RRM is a technique efficiently allocating finite resources, such as energy and time to each task in an optimal and intelligent way. Especially radar beam scheduling is the most critical component for the success of RRM. In this paper, we proposed a rule-based scheduling algorithm and Simulated Annealing(SA) based scheduling algorithm, which are alternatively selected and applied to beam scheduler according radar load status in real-time. The performance of the proposed algorithm was evaluated on the multi-function radar scenario. As a result, we showed that our proposed algorithm can process a lot of beams at the right time with real time capability, compared with applying only rule-based scheduling algorithm. Additionally, we showed that the proposed algorithm can save scheduling time remarkably, compared with applying only SA-based scheduling algorithm.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.116-121
• /
• 2011

The tracking radar systems in NARO space center are used in order to acquire the TSPI (Time, Space, and Position Information) data of the launch vehicle. The tracking radar produce the measurements of tracked targets in the radar-centered coordinate system. When the tracking radar is in the Cartesian/Polar tracking mode, the state vector data is sent in radar-centered Cartesian/Polar coordinate system to RCC. RCC also send the slaving data in Test Range coordinate system to the tracking radar. So, the tracking radars have to transform the slaving data in Test Range coordinate system into in radar-centered coordinate system. In this study, we described the coordinate transformation between radar-centered coordinate system and Test Range coordinated system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.118-126
• /
• 2006

As weapon systems are becoming advanced and intelligent, they are designed to have such events like ejecting sub-munitions. So it is continually requested to measure the event time and position exactly. We can measure the event time and position by analyzing the complex signal of the instrumentation radar in the time domain and can also obtain the spin rate of the target by analyzing the complex signal in the frequency domain.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.93-108
• /
• 1995

SART(Search and Rescue Radar Transponder) is a radar transponder capable of operating in the 9GHz band which is one element of GMDSS. the fundamental function of the SART is to indicate its position. Thus it is so much available to assist SAR operation when an emergency and casualty occur at any sea area, In the thesis we designed manufactured each part of circuit to develop the advanced SART and configured to test the characteristics in many ways, As the results of detailed things we confirmed that the developed SART could be high possibility of production.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.1
• /
• pp.17-32
• /
• 1995

SART(Search and Rescue Radar Transponder) is a radar transponder capable of operating in the 9GHz band, which is one element of GMDSS. The fundamental function of the SART is to indicate its position. Thus, it is so much available to assist SAR operation when an emergency and casualty occur at any sea area. In the thesis, we designed, manufactured each part of circuit to develop the advanced SART and configured to test the characteristics in many ways. As the result of detailed things, we confirmed that the developed SART could be high possibility of production.