• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.799-802
• /
• 2001

For imaging of concrete specimens using radar, principles of radar and signal processing are discussed. Experimental data obtained from radar measurement of two different concrete specimens at two different frequency bandwidths of 2~3.4 GHz, 3.4~5.8 GHz and these two frequencies are combined to show better imaging. A signal processing scheme has been implemented to visualize the concrete specimens. Through combined frequency, imaging results of concrete specimens were improved.

• 한국전자파학회논문지
• /
• 제26권7호
• /
• pp.656-665
• /
• 2015

본 논문에서는 시간-주파수 변환에 요동보상을 적용한 UWB 레이다 Bistatic ISAR (Bistatic Inverse Synthetic Aperture Radar: B-ISAR) 이미징에 적용하여 레이다 이미징의 선명도와 품질을 개선하였다. UWB 레이다를 사용하여 제안하는 시간-주파수 알고리즘을 검증하였으며, 이를 위하여 B-ISAR 알고리즘 절차, 시간-주파수 변환과 요동보상 개선 등 필요한 이론적 근거를 제시하였다. B-ISAR 이미징 알고리즘으로 이미지를 생성하였으며, UWB 바이스테틱 ISAR 이미징 생성시 요동보상을 적용한 시간-주파수 변환 기법인 STFT(Short-Time Fourier Transform), GWT(Gabor Wavelet Transform), WVD(Wigner-Ville distribution) 방식을 차례대로 구현하였다. 그리고 STFT, GWT와 WVD 알고리즘을 이용하여 B-ISAR 이미징 알고리즘의 성능을 비교하였으며, 그 결과 WVD가 다른 방식들에 비하여 영상이 선명하고, 퍼짐 현상이 줄어듦을 알 수 있었다.

• ETRI Journal
• /
• 제38권1호
• /
• pp.70-80
• /
• 2016

This paper addresses the problem of robust waveform design for distributed multiple-radar systems (DMRSs) based on low probability of intercept (LPI), where signal-to-interference-plus-noise ratio (SINR) and mutual information (MI) are utilized as the metrics for target detection and information extraction, respectively. Recognizing that a precise characterization of a target spectrum is impossible to capture in practice, we consider that a target spectrum lies in an uncertainty class bounded by known upper and lower bounds. Based on this model, robust waveform design approaches for the DMRS are developed based on LPI-SINR and LPI-MI criteria, where the total transmitting energy is minimized for a given system performance. Numerical results show the effectiveness of the proposed approaches.

• Corrosion Science and Technology
• /
• 제3권6호
• /
• pp.262-264
• /
• 2004

Ground Penetrating Radar (GPR) has been used to image inside concrete specimens embedded with steel bars and delamination. An imaging algorithm has been developed to improve measurement output generated from a commercial radar system. For the experiments, laboratory size concrete specimens are made with the dimensions of $1,000mm(W){\times}1,000mm(L){\times}250mm(D)$. The results have shown improved output of the radar measurements compared to commercially available processing methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.5103-5115
• /
• 2015

In radar imaging, a target is usually consisted of a few strong scatterers which are sparsely distributed. In this paper, an improved sparse signal recovery algorithm based on smoothed l₀ (SL0) norm method is proposed to achieve high resolution ISAR imaging with limited pulse numbers. Firstly, one new smoothed function is proposed to approximate the l₀ norm to measure the sparsity. Then a single loop step is used instead of two loop layers in SL0 method which increases the searching density of variable parameter to ensure the recovery accuracy without increasing computation amount, the cost function is undated in every loop for the next loop until the termination is satisfied. Finally, the new set of solution is projected into the feasible set. Simulation results show that the proposed algorithm is superior to the several popular methods both in terms of the reconstruction performance and computation time. Real data ISAR imaging obtained by the proposed algorithm is competitive to several other methods.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.501-504
• /
• 2000

The classical image reconstruction for stripmap SAR is the range-Doppler imaging. However, when the spotlight SAR system was envisioned, range-Bowler imaging fumed out to fail rapidly in this SAR imaging modality. What is referred to as polar format processing, which is based on the plane wave approximation, was introduced for imaging from spotlight SAR data. This paper has been studied for the raw data processing schemes in the spotlight-mode synthetic aperture radar. we apply the wavefront reconstruction scheme that does not utilize the approximation in spotlight-mode SAR imaging modelity, and compare the performance of target imaging with the polar format inversion scheme.

• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.598-603
• /
• 2017

Traditional three-dimensional (3-D) laser imaging systems are based on real aperture imaging technology, whose resolution decreases as the range increases. In this paper, we develop a novel 3-D imaging technique based on the synthetic aperture technology in which the imaging resolution is significantly improved and does not degrade with the increase of the range. We consider an imaging laser radar (ladar) system using the floodlight transmitting mode and multi-beam receiving mode. High 3-D imaging resolutions are achieved by matched filtering the linear frequency modulated (LFM) signals respectively in range, synthetic aperture along-track, and the real aperture across-track. In this paper, a novel 3-D imaging signal model is given first. Because of the motion during the transmission of a sweep, the Doppler shift induced by the continuous motion is taken into account. And then, a proper algorithm for the 3-D imaging geometry is given. Finally, simulation results validate the effectiveness of the proposed technique.

• 한국지진공학회논문집
• /
• 제6권1호
• /
• pp.13-21
• /
• 2002

Inverse synthetic aperture radar(ISAR)를 이용하여 콘크리트의 비파괴 검사시 필요한 적정 주파수 대역폭을 결정하기 위해 주파수 합성을 실시하였다. 콘크리트 시편의 내부를 영상화하기 위한 레이더 신호처리 기법을 이용하여 레이더 주파수 2~3.4 GHz, 3.4~5.8 GHz 대역에서 무근 콘크리트 시편과 내부 공동 또는 철근이 있는 콘크리트 시편을 대상으로 실험하였다. 분해능을 높이기 위해 두 측정 주파수 대역을 합성한 2~5.8 GHz대역에서 신호처리를 하여 영상화 결과를 향상시켰다. 주파수 대역폭 변화에 따른 콘크리트 시편 비파괴 검사 결과의 영향을 분석하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.262-267
• /
• 1998

In Synthetic Aperture Radar(SAR) imaging, the echoed data are collected by moving radar's position with respect to the target area, and this operation actually gives effect of synthesizing aperture size, which in turn gives better cross range resolution of reconstructed target scene. Among several inversion scheme for SAR Imaging, we uses an inversion scheme which uses no approximation in wave propagation analysis, and try to verify whether the collected data with synthesized aperture actually gives the same support as that with physical aperture in the same size. To do this, we make a signal subspace comparison of two imaging models with physical and synthesized arrays, respectively. Theoretical comparison and numerical analysis using Gram-Schmidt procedures had been performed. The results showed that the synthesized array data fully span the physical array data with the same system geometry and strongly support the proposed inversion scheme valuable in high resolution radar imaging.

• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1054-1062
• /
• 2011

무인 차량의 야지 자율 주행을 위한 근거리 초광대역 bistatic 레이다에 적합한 시간 영역 영상화 기법의 구현에 대해 기술한다. 기존의 SAR(Synthetic Aperture Radar) 영상화 기법에서 주파수 영역에 기반을 둔 방법은 원전계 조건을 만족하는 응용 분야에는 잘 적용되지만, 근거리에 적용할 경우 근사화에 따른 위상 오차가 크게 되어 영상의 품질을 떨어뜨린다. 따라서 근거리 영상 레이다에서는 시간 영역에 기반을 둔 back-projection 방법이 적합하다. 그러나 back-projection의 경우 수행 시간이 매우 긴 단점이 있다. 따라서 시간 영역에 기반을 두고 영상의 품질은 back-projection과 유사하며, 수행 시간을 줄일 수 있는 방법으로 개발된 것이 FFBP(Fast Factorized Back-Projection) 방법이다. 야지에서 획득한 레이다 원시데이터를 사용하여 back-projection 방법과 FFBP 방법을 구현하고 영상의 품질 및 수행 시간을 비교하여 bistatic 전방 관측 레이다의 시간 영역 영상화 기법의 적용 가능성을 입증한다.