• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.364-375
• /
• 2020

Objectives: The purpose of this study is to suggest a direction for consumer-oriented curriculum development by analyzing the priorities of subjects and their preference for educational methods. Methods: The participants included 773 management supervisors and education practitioners in the workplace, and a survey was conducted from April 17 to August 30, 2019. Frequency analysis, t-test, Borich's Needs Analysis, and Locus for Focus Model analysis were performed using Microsoft Excel 2019 and IBM SPSS 21.0. Results: The highest perceived priorities for education subjects were as follows: ① 'CPR and First Aid Practice' and 'Occupational Disaster Prevention and First Aid Basics' in the manufacturing industry; and ② 'Emotional Labor and Job Stress Prevention', 'Occupational Disaster Prevention and First Aid basics, and 'Musculoskeletal Disorder Prevention' in the service industry. 'Collective education' was the most preferred method of education. 'School-type' was preferred for the seating arrangement, and the proper number of trainees was considered to be about 30. Respondents said the contents of the education was a top priority when they applied for education, and curriculum and appropriate textbooks should be considered in calculating the cost of education. Conclusions: Practical subjects and subjects related to major hazards by industry were required for management supervisor education. It was proposed in this study that the contents and operating methods of education be changed so that workers can easily comprehend essential subjects such as the Occupational Safety and Health Act. In conclusion, it is necessary to design the curriculum and apply educational methods suitable for each subject's characteristics in consideration of the priorities for subjects reflected in the needs of trainees.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.146-150
• /
• 2020

Assistive technologies for people with disabilities are often marginalized in the Fourth Industrial Revolution. In this paper, we intend to present the possibility of acquiring tactile information through the tactile display adapting an electromagnetic actuator. The multi-layered display designed for tactile communication has innovatively narrowed the size and spacing of cells in order to express pictures, maps, and graphics. This display has enabled the visually impaired to touch two-dimensional information combining with other assistive technologies so that. It would also provide a technical source of access to STEM education (Science, Technology, Engineering, and Mathematics) so that students will perform better and be better prepared for advanced education. Moreover, it can be applied to public infrastructure and transportation in smart-city projects on the globe. Hence, this paper introduces the principle of Electromagnetic-actuator and how it can be utilized in many diverse areas.

• Journal of Distribution Science
• /
• v.21 no.6
• /
• pp.107-117
• /
• 2023

Purpose: To know the existence of tax services, it is seen as a redistribution of income to ensure the implementation of national development and social welfare carried out by the state to the community and determine the effect of the quality of tax services, tax audits and tax collection against either simultaneously or partially against the tax ratio in the area of the Primary Tax Service Office of West Makassar. Research Design Data and Methodology: The tax revenue rate is too low based on the Revenue Statistics in Asian and Pacific report, released by the OECD at the end of July 2017. Tax revenue growth is also difficult to increase because of typical inelastic tax revenues. Consequently, tax growth cannot exceed GDP growth. The government boosted the tax ratio by minimizing tax payment irregularities and optimizing tax data utilization as well as distribution income for national social welfare. Transforming all sectors in the real economy so that it is affordable to tax, diversification of taxation is directed towards new sources of economic growth. The data analysis method used is multiple linear regression. Results: The results showed that the quality of tax services and tax audits were dominant in determining tax ratios, whereas Tax collection offers a significant but lower value.Conclusion: The existence of tax services, it is seen as a redistribution of income to ensure the implementation of national development and social welfare carried out by the state to the community.Quality and service in taxation services to create and maintain trust and cooperation relationships between tax officials and taxpayers.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.2
• /
• pp.145-153
• /
• 2023

Objectives: Although it is difficult to define the quality of stroke care, acute ischemic stroke (AIS) patients with moderate-to-severe neurological deficits may benefit from thrombectomy-capable hospitals (TCHs) that have a stroke unit, stroke specialists, and a substantial endovascular thrombectomy (EVT) case volume. Methods: From national audit data collected between 2013 and 2016, potential EVT candidates arriving within 24 hours with a baseline National Institutes of Health Stroke Scale score ≥6 were identified. Hospitals were classified as TCHs (≥15 EVT case/y, stroke unit, and stroke specialists), primary stroke hospitals (PSHs) without EVT (PSHs-without-EVT, 0 case/y), and PSHs-with-EVT. Thirty-day and 1-year case-fatality rates (CFRs) were analyzed using random intercept multilevel logistic regression. Results: Out of 35 004 AIS patients, 7954 (22.7%) EVT candidates were included in this study. The average 30-day CFR was 16.3% in PSHs-without-EVT, 14.8% in PSHs-with-EVT, and 11.0% in TCHs. The average 1-year CFR was 37.5% in PSHs-without-EVT, 31.3% in PSHs-with-EVT, and 26.2% in TCHs. In TCHs, a significant reduction was not found in the 30-day CFR (odds ratio [OR], 0.92; 95% confidence interval [CI], 0.76 to 1.12), but was found in the 1-year CFR (OR, 0.84; 95% CI, 0.73 to 0.96). Conclusions: The 1-year CFR was significantly reduced when EVT candidates were treated at TCHs. TCHs are not defined based solely on the number of EVTs, but also based on the presence of a stroke unit and stroke specialists. This supports the need for TCH certification in Korea and suggests that annual EVT case volume could be used to qualify TCHs.

• The Korean Journal of Food And Nutrition
• /
• v.37 no.1
• /
• pp.9-16
• /
• 2024

To produce super sweet corn sikhye, substituted for sweetener, the ratio of rice and super sweet corn was adjusted and processed with complex enzymes during saccharification, and their physicochemical and sensory properties were analyzed. The soluble solid content of the control and Corn-5 showed significantly high content at 13.50 °Brix, and the reducing sugar content of Corn-5 showed the highest content at 9.45%. The control showed the lowest free sugar content among all the experimental groups, excluding maltose content. In the enzyme-treated corn sikhye group, as the amount of super sweet corn increased, the content of sucrose decreased and the contents of glucose and fructose increased. The content of ascorbic acid and polyphenol compounds increased as the amount of super sweet corn increased. DPPH and ABTS radical scavenging abilities increased with increasing ratio of super sweet corn and enzyme treatment compared to the control. In the case of sensory evaluation, Corn-3, which substituted 30% of super sweet corn for rice and treated with enzymes, showed higher evaluations in taste, sweetness, and overall preference than those of the control.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.11
• /
• pp.1553-1561
• /
• 2013

Forty-eight crossbred heifers ($378.1{\pm}18$ kg) were used in a 56-d feeding trial (four pens per treatment in a randomised complete block design) to evaluate the influence of ionophore supplementation on growth performance, dietary energetics and carcass characteristics in finishing cattle during a period of heat stress. Heifers were fed a diet based on steam-flaked corn (2.22 Mcal $NE_m/kg$) with and without an ionophore. Treatments were: i) control, no ionophore; ii) 30 mg/kg monensin sodium (RUM30); iii) 20 mg/kg lasalocid sodium (BOV20), and iv) 30 mg/kg lasalocid sodium (BOV30). Both dry matter intake (DMI) and climatic variables were measured daily and the temperature humidity index (THI) was estimated. The maximum THI during the study averaged 93, while the minimum was 70 (THI average = $79.2{\pm}2.3$). Compared to controls, monensin supplementation did not influence average daily gain, the estimated NE value of the diet, or observed-to-expected DMI, but tended (p = 0.07) to increase (4.8%) gain to feed. Compared to controls, the group fed BOV30 increased ($p{\leq}0.03$) daily gain (11.8%), gain to feed (8.3%), net energy of the diet (5%), and observed-to-expected DMI (5.2%). Daily weight gain was greater (7.6%, p = 0.05) for heifers fed BOV30 than for heifers fed MON30. Otherwise, differences between the two treatments in DMI, gain to feed, and dietary NE were not statistically significant (p>0.11). Plotting weekly intakes versus THI, observed intake of controls was greater (p<0.05) at THI values ${\leq}77$ than ionophore groups. When THI values were greater than 79, DMI of control and MON30 were not different (p = 0.42), although less than that of groups fed lasalocid (p = 0.04). Variation in energy intake was lower (p>0.05) in the ionophores group (CV = 1.7%) than in the control group (CV = 4.5%). Inclusion of ionophores in the diet resulted in relatively minor changes in carcass characteristics. It is concluded that ionophore supplementation did not exacerbate the decline of DM intake in heat-stressed cattle fed a high-energy finishing diet; on the contrary, it stabilised feed intake and favoured feed efficiency. Ionophore supplementation reduced estimated maintenance coefficients around 10% in finishing cattle during a period of heat stress. This effect was greatest for heifers supplemented with 30 mg lasalocid/kg of diet.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1348-1358
• /
• 2017

To enhance the physiological activity of the Rhynchosia volubilis (RV), R. volubilis (RVHE-A) and R. volubilis-added herbal powder (RVHE-B) were fermented with a solid state culture of Hericium erinaceum mycelia (HE). The total isoflavone contents of the non-fermented RV-A ($489.9{\mu}g/g$) and RV-B ($571.1{\mu}g/g$) were remarkably increased in fermented RVHE-A ($1,836.4{\mu}g/g$) and RVHE-B ($1,276.7{\mu}g/g$). In particular, aglycone isoflavones such as daidzein and genistein were significantly higher in the RVHE-A than any other sample. When hot-water (HW) and EtOH extracts (E) were fractionated from the RV and RVHE, both extracts from the RVHE-A were higher than those from the RV-A in total polyphenol and flavonoid contents. However, the RVHE-B-HW showed a lower polyphenol and flavonoid content level than did RV-B-HW. RVHE-A-HW and -E also had more potent ABTS radical scavenging activity than any extract from the non-fermented RV and other ferments (RVHE-B). In the meanwhile, RVHE-A-HW potently stimulated the production of macrophage activation-related cytokines such as $TNF-{\alpha}$, IL-6 and IL-12 ($841.7{\pm}71.3pg/mL$, $3.9{\pm}0.1ng/mL$, $179.3{\pm}30.2pg/mL$) from peritoneal macrophage more than RV-A-HW ($92.5{\pm}1.5pg/mL$, $0.1{\pm}0.0ng/mL$, $37.4{\pm}5.4pg/mL$) as well as RVHE-B-HW ($557.0{\pm}21.3pg/mL$, $1.8{\pm}0.0ng/mL$, $90.0{\pm}10.0pg/mL$). However, all the EtOH extracts did not show significant activity. In addition, the RVHE-A-HW showed a significantly higher intestinal immune system modulating activity through Peyer's patch and GM-CSF production than did any other extract from RV and RVHE-B. In conclusion, these results suggest that the fermented R. volubilis with H. erinaceum mycelia possesses a possible use as an industrial application as functional food or material.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.755-767
• /
• 2014

In this study, detailed air flow characteristics in an urban areas were analyzed using GIS data and a Computational Fluid Dynamics (CFD) model. For this, a building construction algorithm optimized for Geographic Information System (GIS) data with a vector format (Los Angeles region imagery acquisition consortium 2 geographic information system, LARIAC2 GIS) was used. In the LARIAC2 GIS data, building vertices were expressed as latitude and longitude. Using the model buildings constructed by the algorithm as the surface boundary data in the CFD model, we performed numerical simulations for two building-congested areas in Los Angeles using inflow information provided by California Air Resources Board. Comparing with the inflow, there was a marked difference in wind speed and direction within the target areas, which was mainly caused by the secondarily induced local circulations such as street-canyon vortices, horse-shoe vortices, and recirculation zones. In street canyons parallel to the inflow direction, wind speed increased due to a channeling effect and, in street canyons perpendicular to the inflow direction, vertically well developed vortices were induced. In front of a building, a horse-shoe vortex was developed near the surface and, behind a building, a recirculation zone was developed. Near the surface in the areas where the secondarily induced local circulations, wind speed remarkably increased. Overall, wind direction little (largely) changed at the areas where wind speed largely increased (decreased).

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.731-742
• /
• 2014

In this study, we developed a new algorithm which can construct model buildings used as a surface boundary in numerical models using GIS with latitudinal and longitudinal information of building vertices. The algorithm established the outer boundary of a building first, by finding segments passing neighboring two vertices of the building and connecting the segments. Then, the algorithm determined the region inside the outer boundary as the building. The new algorithm overcame the limit that the algorithm developed in the previous study had in constructing concave buildings. In addition, the new algorithm successfully constructed a building with complicated shape. To investigate effects of the modification in building shape caused by the building-construction algorithm on flows and pollutant dispersion around buildings, a computational fluid dynamics model was used and three kinds of building type were considered. In the downwind region, patterns in flow and pollutant dispersion were little affected by the modification in building shape caused. However, because of reduction in air space resulted from the building-shape modification, vortex structure was not resolved or smaller vortex was resolved near the buildings. The changes in flow pattern affected dispersion patterns of scalar pollutants emitted around the buildings.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1637-1641
• /
• 2009

본 연구는 막공정을 이용하는 수처리기술에 있어서 최대 난점 중의 하나인 fouling 현상을 억제하기 위하여 여과방향의 반대방향에서 여과수를 지속적으로 분사하여 줌으로써 여과와 세정이 동시에 일어나는 동시세정방식을 평가하기 위한 것이다. 실험은 성균관대학교 환경플랜트 내에 pilot 실험지를 조성하여 실시하였으며, 실험원수는 오수처리방류수를 저류하는 연못수와 오수원수를 혼합하여 농도를 조절한 후에 저농도와 고농도 조건에서 실험을 실시하였다. 저농도 조건(SS 10$\sim$20 mg/L)에서는 연못의 HRT를 고려하여 일일 5시간 씩 8일간 가동하였고, 고농도 조건(SS 200 mg/L 이상)에서는 8시간씩 가동하였다. 저농도의 경우에는 가동기간 중 배수가 일어나지 않았고, 일일 운전 종료 후 유지관리를 위한 강제배수만 실시하였다. 고농도에서는 초기에 배수가 짧은 term으로 자주 일어났지만, 20분 이상의 비교적 긴 여과지속시간을 유지하였고 유입수 농도가 낮아지면서 배수타임이 점점 늘어나는 경향을 보였다. 이러한 결과는 동시세정방식에 의한 여과기술에 있어 유입수 농도가 fouling 발생빈도에 크게 영향을 미친다는 것을 의미하며, $5\;{\mu}m$의 미세막에서도 고농도 운전이 가능하다는 사실을 보여준다. 동시세정방식은 Rum Filter의 fouling을 억제하고 지속적인 운전을 가능하게 해주는 핵심기술이다. 세정 시 세정압력설정은 매우 중요한 운전인자 중 하나인데, 세정압력이 너무 클 경우에는 소요되는 동력이 많아져 효율적인 설계 및 운전에 장애요인이 될 수 있고, 너무 낮을 경우에는 세정이 제대로 되지 않고 여과막 내부와 외부의 압력차를 크게 가져와 배수타임이 빨라지는 결과를 초래한다. 따라서 적절한 세정압력을 파악하고 설정하기 위하여 세정압력을 변화시켜가면서 이에 따른 차압의 변화를 관측하여 보았다. 여과막의 공극과 세정압력에 변화를 주면서 실험을 한 결과, 세정압력이 커지면 여과막에 작용하는 부하가 약간 증가하는 것으로 나타났지만, 그 차이가 $0.02\;kg_f/cm^2$으로 나타나, $4.0\;kg_f/cm^2$ 이상의 세정압력에서 적용이 가능한 것으로 나타났다. 또한, 유입유량을 설정하기 위하여 $4.5\;kg_f/cm^2$의 세정압력을 유지한 상태로 유입유량을 점진적으로 증가시키면서 압력의 변화를 관측하였다. $5\;{\mu}m$에서는 180 LPM 및 200 LPM에서, $8\;{\mu}m$에서는 200 LPM에서 자체적으로 설정한 배수차압 상승분인 $0.1\;kg_f/cm^2$를 초과한 것으로 나타났고, $10\;{\mu}m$ 이상에서는 모두 200 LPM이상 처리해도 배수압력에 걸리지 않는 것으로 나타났다. 이러한 결과는 현재 본 시스템에 적용하고 있는 유입유량 기준치를 2배 이상 상회하는 결과로서 추가적인 실험을 통하여 기존 여과기술보다 여과지속시간이길고, 여과 flux가 높은 기술을 개발할 수 있을 것으로 판단된다.