• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1021-1029
• /
• 2013

In this paper, we propose a new indoor location estimation method which combines the fingerprint technique with the propagation prediction model. The wireless LAN (WLAN) access points (APs) deployed indoors are divided into public APs and private APs. While the fingerprint method can be easily used to public APs usually installed in fixed location, it is difficult to apply the fingerprint scheme to private APs whose location can be freely changed. In the proposed approach, the accuracy of user location estimation is improved by simultaneously utilizing public and private APs. Specifically, the fingerprint method is used to the received signals from public APs and the propagation prediction model is employed to the signals from private APs. The performance of the proposed method is compared with that of conventional indoor location estimation schemes through measurements and numerical simulations in WLAN environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.10
• /
• pp.889-900
• /
• 2012

In wireless sensor networks, the positioning scheme using received signal strength (RSS) has been widely considered. Appropriate estimation of path-loss exponent (PLE) between a sensor node and an anchor node plays a key role in reducing position error in this RSS-based positioning scheme. In the conventional researches, a sensor node directly uses the PLEs measured by its nearest anchor node to calculate its position. However, the actual PLE between a sensor node and the anchor node can be different from the PLE measured by its nearest anchor node. Thus, if a sensor node directly uses the PLEs measured by its nearest anchor node, the estimated position is different from the actual position of the sensor node with a high probability. In this paper, we describe the method how a sensor node estimates PLEs from the anchor nodes of interest by itself and calculates its position based on these self-estimated PLEs. Especially, our proposal suggests the mechanism to iteratively calculate the PLEs depending on the estimated distances between a sensor node and anchor nodes. Based on the recalculated PLEs, the sensor node reproduces its position. Through simulations, we show that our proposed positioning scheme outperforms the traditional scheme in terms of position error.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.243-257
• /
• 2010

Rapid developments in wireless sensor networks have extended many applications, hence, many studies have developed wireless sensor network positioning systems for indoor environments. Among those systems, the Global Position System (GPS) is unsuitable for indoor environments due to Line-Of-Sight (LOS) limitations, while the wireless sensor network is more suitable, given its advantages of low cost, easy installation, and low energy consumption. Due to the complex settings of indoor environments and the high demands for precision, the implementation of an indoor positioning system is difficult to construct. This study adopts a low-cost positioning method that does not require additional hardware, and uses the received signal strength (RSS) values from the receiver node to estimate the distance between the test objects. Since many objects in indoor environments would attenuate the radio signals and cause errors in estimation distances, knowing the path loss exponent (PLE) in an environment is crucial. However, most studies preset a fixed PLE, and then substitute it into a radio propagation loss model to estimate the distance between the test points; such method would lead to serious errors. To address this problem, this study proposes a Path Loss Exponent Estimation Algorithm, which uses only four beacon nodes to construct a radio propagation loss model for an indoor environment, and is able to provide enhanced positioning precision, accurate positioning services, low cost, and high efficiency.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.273-279
• /
• 2014

In this paper, we propose a novel algorithm for three dimensional positioning system and implement a system over indoor wireless channel. A commercial modules are used for mobile and fixed nodes which are product of German company Nanotron Co. This module adopts chirp spread spreading scheme as modulation method to improve the ranging resolution and the module satisfies the IEEE standard 802.15.4a. The distance computation is based on received signal strength(RSS) levels and trilateration method. A testbed was set up to measure and compare the positioning estimation error of the proposed algorithm. The experiments results showed that the accuracy of location estimation was sufficiently good as much as 1m distance error in a wireless environment in an office building.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.634-644
• /
• 2016

Channel-based radio-frequency fingerprinting such as a channel impulse response (CIR), channel transfer function (CTF), and frequency coherence function (FCF) have been recently proposed to improve the accuracy at the physical layer; however, their empirical performance, advantages, and limitations have not been well reported. This paper provides a comprehensive empirical performance evaluation of RF location fingerprinting, focusing on a comparison of received-signal strength, CIR-, CTF-, and FCF-based fingerprinting using the weighted k-nearest neighbor pattern recognition technique. Frequency domain channel measurements in the IEEE 802.11 band taken on a university campus were used to evaluate the accuracy of the fingerprinting types and their robustness to human-induced motion perturbations of the channel. The localization performance was analyzed, and the results are described using the spatial and temporal radio propagation characteristics. In particular, we introduce the coherence region to explain the spatial properties and investigate the impact of the Doppler spread in time-varying channels on the time coherence of RF fingerprint structures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.589-594
• /
• 2015

In this paper, we described the Cramer-Rao Lower Bound (CLRB) performances of Time Difference of Arrival (TDOA) and Frequency Difference of Arrival (FDOA) methods when there are multiple emitters. The TDOA and FDOA values between two receivers can be simultaneously estimated by using the so-called Complex Ambiguity Function (CAF). In the case of multiple emitters, there exist Inter Symbol Interferences (ISIs) in the measurement data. Therefore, it is required to reduce the effect of ISI and provide a performance evaluation method of TDOA and FDOA estimations. In order to eliminate the ISIs, using of a filter bank before calculating CAF is proposed when the carrier frequencies of the emitters are different to one another. Angle of Arrival (AOA) or Received Signal Strength (RSS) methods before calculating CAF were proposed to reduce the ISIs when the carrier frequencies are the same. In order to evaluate the CRLB of TDOA and FDOA estimations, we employed the conditional probability distribution method and described the numerical comparison results.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.2
• /
• pp.170-176
• /
• 2017

In this paper, we propose an underwater localization scheme through the fusion of an inertial navigation system (INS) and the received signal strength (RSS) of electromagnetic (EM) wave sensors to guarantee precise localization performance with high sampling rates. In this localization scheme, the INS predicts the pose of the unmanned underwater vehicle (UUV) by dead reckoning at every step, and the RF sensors corrects the UUV position functions using the Earth-fixed reference when the UUV is located in underwater wireless sensor networks (UWSN). The localization scheme and state modeling were conducted in the extended Kalman filter framework, and UUV localization experiments were conducted in a basin environment. The scheme achieved reliable localization accuracy during long-term navigation, demonstrating the feasibility of exploiting EM wave attenuation as Earth-fixed reference sensors.

• Journal of Korea Multimedia Society
• /
• v.12 no.10
• /
• pp.1436-1449
• /
• 2009

The value of sensing information is decided according to positions of sensor nodes, which are very important in sensor networks. In this paper, we propose a method that estimates positions of nodes by using adjacent node information and received signal strength in a sensor network. With the proposed method, we can find positions of nodes easily because we use information that nodes have. Moreover, we can find distribution easily for all the nodes because we can measure a relative position for a node whose position is not known based on anchor nodes whose positions are already known. We utilized Use case diagram, activity diagram and State machine diagram among several diagrams of UML to implement proposed method in sensor networks that is dynamic system. We can understand exact flow for each function of the proposed method in node position estimation system can be implemented easily. And we can be confirmed that the position of estimated nodes has a little error.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1496-1521
• /
• 2012

Uncertainty is ubiquitous in target tracking wireless sensor networks due to environmental noise, randomness of target mobility and other factors. Sensing results are always unreliable. This paper considers unreliability as it occurs in wireless sensor networks and its impact on target-tracking accuracy. Firstly, we map intersection pairwise sensors' uncertain boundaries, which divides the monitor area into faces. Each face has a unique signature vector. For each target localization, a sampling vector is built after multiple grouping samplings determine whether the RSS (Received Signal Strength) for a pairwise nodes' is ordinal or flipped. A Fault-Tolerant Target-Tracking (FTTT) strategy is proposed, which transforms the tracking problem into a vector matching process that increases the tracking flexibility and accuracy while reducing the influence of in-the-filed factors. In addition, a heuristic matching algorithm is introduced to reduce the computational complexity. The fault tolerance of FTTT is also discussed. An extension of FTTT is then proposed by quantifying the pairwise uncertainty to further enhance robustness. Results show FTTT is more flexible, more robust and more accurate than parallel approaches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.338-348
• /
• 2005

Currently, IEEE 802.11 Wireless LAN (WLAN) is rising as the most popular means for the broadband wireless access network. In this thesis, we propose a QoS(Quality of Service)-Oriented mechanism using handshaking method of scanning phase in IEEE 802.11 handoff. In conventional process for handoff, the major criterion to select the best AP(Access Point) among candidates is normally based on the RSS(Received Signal Strength), which does not always make the selected network guarantee the maximum achievable performance. Even though the link quality with a neighboring AP is excellent, the AP may not be a good candidate to handoff to simply because MAC(Medium Access Control) protocol of IEEE 802.11 standard is contention-based such as CSMA/CA. Therefore, if we apply network level information to AP selection criteria, we can achieve better handoff efficiency rather than before. The analysis and simulation results applied to our new mechanism show clearly better performance than AP selection based on traditional handoff method.