• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.556-563
• /
• 2020

Most of a BIPVS (Building Integrated Photovoltaic System) is installed on the rooftop or wall of a building. Therefore, the main factor to consider for selecting the installation site is the shadow effects produced by the surrounding buildings. On the other hand, when the photovoltaic was installed on soundproof walls, shadow effects were produced by not only surrounding buildings but also the surrounding trees. Therefore, a different data model and algorithm with the BIPVS case are essential for proper installation sites selection of a SIPVS (Soundproof wall Integrated Photovoltaic System). This paper deals with the DSM (Digital Surface Model)-based proper installation site analysis for SIPVS. First, the solar incident and altitude angles of the installation candidate sites (solar panel) during the year were calculated. Second, the shadow effects (shadowed or unshadowed) were determined for the candidate sites at each time with the DSM. Third, the amount of solar radiation was calculated with the incident angle for the candidate sites at an unshadowed period. The proper installation site of the SIPVS could then be selected by comparing the accumulated annual solar radiation for each candidate. The proposed algorithm was implemented as a prototype (Java program). From the experiment, the order of the installation suitability was determined among the nine candidates. The proposed algorithm could be used for proper BIPVS installation site analysis aimed at the lower part of a building and calculation of the expected power production.

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.103-108
• /
• 2013

Vietnam is a developing country with the rate around 5%-6% per year, especially in urban areas. Rapidly developed urban areas lead to stress for infrastructure and the water supply is also stressed. In Hanoi city, total water capacity from the manufactories is around one million cubic meters per day and almost the entire main water source is groundwater but it is not enough to supply all of Hanoi's people, especially in the summer. A demo project is implemented in Hanoi University of Civil Engineering (HUCE) to produce drinking water by using the rainwater and membrane system and supply for people. In this project, rainwater is collected on the rooftop of the lecture building with an area of around $500m^2$ and $100m^3$ volumetric rainwater tanks. Afterwards, the rainwater is treated by the micro-membrane system and supplied to the tap water. Total cost for construction, technology and operation in the first year is around USD 48,558. In the long-term (15 yr) if HUCE invests in the same system, with $20m^3$ volumetric storage tank, it can provide drinking water for 500 staffs in every year. The cost of investment and operation for this system is lower than 30% compared to buying bottled water with the price USD 1.8/bottle. The drinking water parameters after treatment are pH, 7.3-7.75; turbidity, 0.6-0.8 NUT; total dissolved solids, 60-89 mg/L; coliform, 0; heavy metal similar with water quality in the bottle water in Vietnam.

• KIEAE Journal
• /
• v.6 no.2
• /
• pp.67-74
• /
• 2006

As sustainable design technologies, advanced daylighting systems with lightshelves have been developed and are currently under monitoring the daylighting performance. This study aims to evaluate the comparative daylighting performance of sloped lightshelf and conventional glazing window with mock-up model, reconstructed as a prototype of Korean office building, sized $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and $1.8m{\times}4.8m$($w{\times}h$) for the south facing side-window was installed on the rooftop of engineering building, Kyung Hee University in Korea. It has an identical configuration of reference room and the test room. For the test room, the sloped type lightshelf system was designed as 10mm transparency sheet glass, tilt angle degree $29^{\circ}$, and total sized 1.28m (interior length 0.88m, exterior length 0.49m). It consisted of daylighting collector, entrance glazing and reflector. To assess daylighting performance, the totally 37 measuring points for illuminance and 2 view points of luminance were monitored in every 30 minutes from 12:00 to 15:00. For the detailed analysis, photometric sensors of each room were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point). Luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio, uniformity, and luminance are discussed.

• Journal of Environmental Science International
• /
• v.30 no.2
• /
• pp.109-118
• /
• 2021

Due to changes such as those stemming from the onset of the fourth industrial revolution, it is expected that industrial complexes will transform from being spacious structures into smaller, integrated complexes. Green parks, which are also a type of infrastructure within industrial complexes, also require planned direction suited to the changing environment. The planned directions of green parks in new industrial complexes were examined and surveys were conducted on industrial complex workers. Preferred functional arrangement, importance, and satisfaction levels of green ratios, preference of compound facilities linked to parks, appropriate dimensional greening methods were all surveyed across 1,035 businesses. Results of the survey exhibited that there was high awareness on the importance of building green areas, but it was found that current greenery levels were insufficient. There was a high rate of responses indicated that dimensional greening is required in building-type industrial spaces, and preferences for rooftop greenery, stair-type greenery, and atrium greenery were also high. There were many opinions that it is necessary to integrate cultural facilities, exhibition and educational facilities, commercial facilities, parking lots in parks. Furthermore, it was found that it is necessary to provide pathways for bikes and pedestrians, rather than those for vehicles, and to connect them with the green parks. This study stopped short of exploring the directions for which green parks should aim in new industrial complexes with changes in the industrial environment. In the future, more concrete plans on green park planning techniques according to the spatial characteristics and structures of new industrial complexes will be necessary.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.592-599
• /
• 2016

In the 21st yearly session of the Conference of the Parties (COP 21) of the 2015 United Nations Climate Change Conference, held in Paris, France, in December 2015, the "Paris Agreement" was negotiated; this is a new global agreement on the reduction of climate change, which encourages every country to participate in countermeasures for global climate change. Along with such movements, the electric railway sector has also been actively engaged in low carbon technology. This paper studied the building of a 1.5MW photovoltaic power generation system using the rooftop of the Gwangmyeong Station Building, which is the largest roof among the high-speed railway station buildings in Korea; this station has passenger traffic that reached about 7 million in 2014. For this study, we configured an optimized photovoltaic (PV) power generation system and then estimated the expected annual energy production by using PV system software; we also calculated the expected revenue that could be obtained by linking this source to the power distribution system. The obtained data were used to analyze the contribution of low-carbon energy that could be obtained by introducing a PV power generation system on the roof of an electric railway station building.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.3
• /
• pp.13-24
• /
• 2016

What are the roles and functions of urban gardening created by citizens in Sujin 2-dong, Seongnam-si? This study has looked into urban gardening in everyday life in a bid to find possible solutions for sustainable urban regeneration. The paper has examined the types, functions, and characteristics of urban gardens in Sujin 2-dong, where the urban restoration project is in progress. This study has conducted primarily on-site inspections and interviews. The research findings are as follows. Most urban gardens in Sujin 2-dong have a vertical structure rather than a regular ground-based one due to lack of land. Six major locations of building a garden include the front of a building, rooftop, top of a gate, stairs, wall, and yard. Rooftop gardens are most common and are built mostly for production purposes. Due to architectural characteristics of this village, there are relatively many stair gardens built mostly for aesthetic purposes. The garden in front of a building has served multiple functions, including formation of entry, privacy protection, and prevention of unauthorized parking. Other than those, detached houses have quality urban gardens built with greater effort and care, while multi-household houses have seen a decrease of stair gardens and an increase of vertical gardens due to their comparatively limited space. By utilizing this research, we hope to show that it is important to understand the local's wisdom and voice for a sustainable urban environment as well as keep these findings in mind during the construction of new buildings. This study would be expected to be useful as primary research for urban gardening in everyday life and alternative ways of urban regeneration.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.84-91
• /
• 2009

This paper presents an online partial 3D modeling methodology that uses a mobile augmented reality system and aerial photographs, and a tracking methodology that compares the 3D model with a video image. Instead of relying on models which are created in advance, the system generates a 3D model for a real building on the fly by combining frontal and aerial views. A user's initial pose is estimated using an aerial photograph, which is retrieved from a database according to the user's GPS coordinates, and an inertial sensor which measures pitch. We detect edges of the rooftop based on Graph cut, and find edges and a corner of the bottom by minimizing the proposed cost function. To track the user's position and orientation in real-time, feature-based tracking is carried out based on salient points on the edges and the sides of a building the user is keeping in view. We implemented camera pose estimators using both a least squares estimator and an unscented Kalman filter (UKF). We evaluated the speed and accuracy of both approaches, and we demonstrated the usefulness of our computations as important building blocks for an Anywhere Augmentation scenario.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.58-72
• /
• 2003

Rooftop greenery has been used as a way to solve urban environmental problems by creating green space in densely populated cities. This study was carried out to suggest more effective designs for roof-garden at hospitals through a post-occupancy evaluation. The roofgarden of Asan Medical Center was evaluated with regards to setting, proximate environmental context, users, and design activity by a multi-method including plan investigations, observations, in-depth interviews and questionnaires. The results are summarized as follows; the users' main activities included resting, walking, and talking. A number of users were observed at shaded spaces sitting on such things as benches, pergolas, and shelters. The satisfaction of the users showed high satisfaction level except in the amount of shade, facilities, and shelter. The variables affecting a overall satisfaction were ‘accessibility’, ‘safety’, ‘quality of surroundings’, and ‘suitability for speculation’. By comparing the design concept with using pattern, designer's intention was not reflected sufficiently in several aspects such as ‘event deck for therapy programs’, ‘grove and path’, and ‘low planters’. This study suggests some design implications; it is necessary to furnish shaded sitting places for passive behaviors and pathways for walking or a light exercise. A wind-break wall with glass windows could widen the users' views in a limited space. Natural shade like tree shade or pergola are more desirable than artificial shades. As for the vertical location of the roofgarden, the middle floor could be better than top area for accessibility. Characteristics of building and users should be considered in detail to provide distinct spaces. Proper technical standards for the greening of artificial ground should be established.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.234-245
• /
• 2019

In this paper, I examined the representation of post-colonialism focusing on the spaces in Modern Boy and Assassination. These movies represented Bon-jung and Jong-no as a mixed-residence quarter, over the dual city theory, the orthodoxy of geography. It can be interpreted as the birth of a hybrid subject in post-colonialism. The representation of Bon-jong in Modern Boy was centered around Mitsukoshi Department Rooftop Garden, Namsan Music Center and Myeongdong Cathedral. The representation of Bon-jung in Assassination was centered around Anemone Cafe and Mitsukoshi Department Store. Set in the history of the new building the Japanese Government General of Korea in Jong-no, Modern Boy used it as a place of struggle. The representation of Jong-no in Assassination was centered around the mansion of Kang In-kuk, a pro-Japanese collaborator. Modern Boy and Assassination showed the post-colonialism that breaks through modern binary oppositions by a 'female' national heroine. describing Bon-jung as both a mixed-residence quarter and the original home of post-colonialism movement, they also showed a different aspect from the existing Kyung-sung representations.

• The Journal of Korean Physical Therapy
• /
• v.18 no.3
• /
• pp.79-87
• /
• 2006

Purpose: The present study purposed to examine induced characteristic or erythema and safety by medium wave ultra violet(UVB) lamp. Methods: We compared sunshine and UVB lamp using spectroradiometer and UV radiometer. For measuring sunshine irradiation, we used spectoradiometer and detected from 8 to 18 o'clock every each hour on the beach, playground and rooftop of a 5 story building. The subjects for erythema examination were 5 healthy subjects who have no pathologic history of photosensitivity reaction, psoriasis and vitiligo. They were exposed to UVB radiation at the abdominal area for 2 hours and after irradiation, we observed the change of skin color every 12 hours over a period of 1 week. Results: Between sunshine and UVB lamp, sunshine had higher data on the chromaticity coordinates, dominant and peak wavelength, bandwidth and purity than the UVB lamp but on the color temperature, brightness the UVB lamp had higher data than the sunshine. In comparison of sunshine and UVB lamp, UVB lamp irradiated constantly such as $3.9-4.4{\mu}W/cm^2$ at a distance of 100cm between bed and lamp which was same as early morning irradiation on the sunshine. The erythema didn't appear to any subject. Conclusion: This results suggest that the UVB lamp has lower irradiance as much as early sunshine. Therefore the UVB lamp had no influence of inducing erythema at a distance of 100cm between bed and lamp.