• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.2
• /
• pp.161-170
• /
• 2008

푸쉬-풀 환기시스템은 도금조와 같이 흡인해야 할 거리가 상대적으로 긴 경우에 많이 사용되고 있다. 그러나, 창문이나 출입문을 통한 방해기류가 푸쉬-풀 환기시스템의 오염물질 제어효율을 심각하게 훼손시키고 있다고 추측하고 있으나 이에 대한 세부적인 연구가 부족한 상태에 있다. 따라서, 본 연구에서는 전산유체역학(Computational fluid dynamics)을 이용하여 푸쉬-풀 환기시스템에서의 방해기류의 방향과 세기가 흡인효율에 어떠한 영향을 미치는지에 대해 평가해 보았다. 선형흡인효율(Linear capture efficiency) 방법을 이용하여 푸쉬-풀 환기시스템에서 가상의 개방조에서 발생한 오염물질이 푸쉬-풀 시스템에 의하여 포집되지 못하고 누출되는 구역이 어딘지를 찾아낼 수 있었다. 전산유체역학 컴퓨터시뮬레이션은 AIRPAK2.1 (FLUENT CODE) 소프트웨어를 사용하였다. 푸쉬-풀 후드시스템에 방해기류가 강하게 작용하면 상대적으로 강한 와류가 발생하는데, 일반적인 난류모델인 ${\kappa}-{\varepsilon}$모델은 와류현상을 충분히 보여주지 못한 반면에 RNG 모델을 사용했을 때 실험결과를 적절히 모사해낼 수 있었다. RNG 모델을 이용하여 세가지 방향, 즉 푸쉬에서 풀 방향으로, 풀에서 푸쉬 방향으로 그리고 그에 수직되는 방향으로 방해기류가 있을 때의 푸쉬-풀 환기시스템의 흡인효율을 분석하였다. 방해기류가 0.25m/s이하일 때에는 흡인효율이 거의 떨어지지 않았으나, 방해기류가 0.6m/s에서 흡인효율이 40-70%로 떨어짐을 알 수 있었다. 따라서, 방해기류를 감소시킬 수 있는 방안에 대해서도 연구를 해야 되겠지만, 방해기류 존재 하에서 충분한 흡인 효율을 유지할 수 있는 푸쉬-풀 후드 설계기준에 대한 연구도 필요할 것으로 판단된다.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.211-216
• /
• 1996

A series of experiments were designed to determine the feasibility of single dose of FSH as an effective superovulation method in rabbits. The superovulation treatments examined comparatively were as follows: 1) a single injection of 100 IU PMSG, 2) Multiple injections of 1 IU Super-OV of 2X daily for 3 days, 3) Multiple injections of 6.6 rng Folltropin-V 2X daily for 3 days, 4) Multiple injections of 13.3 rng Folltropn-V l$\times$ daily for 3 days, 5) Single injection of 40 mg Folltropin-V solved in 10% PVP, and 6) Single injection of 40 mg Folltropin-V dissolved in 25% PVP. The results obtained were as follows: The nurnher of ovulation points in the single injection of 40 mg Folltropin-V dissolved in 25% PVP and multiple injections of 6.6 mg Folltropin-V 2X daily for 3 days was averaged 44.6 and 39.2, respectively, which were significantly (P<0.05) more than in a single dose of PMSG or multiple doses of Super-OV. The number of total ova recovered in the single injection of 40 mg Folltropin-V dissolved in 25% PVP and multiple injections of 6.6 mg Folltropin-V 2X daily for 3 days was averaged 30.4 and 25.9, respectively, which were significantly (P<0.05) more than in the single dose of PMSG or multiple doses of Super-OV. A similar result was obtained for the number of fertilized ova recovered from the above six treatments. From the above results it was concluded that a single injection of 40 mg Folltropin-V dissolved in 25% PVP could be an effective and simple method for superovulation in rabbits.

• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.17-23
• /
• 2012

Recently, the research for cryptographic algorithm, in particular, a stream cipher has been actively conducted for wireless devices as growing use of wireless devices such as smartphone and tablet. LFSR based random number generator is widely used in stream cipher since it has simple architecture and it operates very fast. However, the conventional multi-LFSR RNG (random number generator) suffers from its hardware complexity as well as very closed correlation between the numbers generated. A leap-ahead LFSR was presented to solve these problems. However, it has another disadvantage that the maximum period of the generated random numbers are significantly decreased according to the relationship between the number of the stages of the LFSR and the number of the output bits of the RNG. This paper presents new leap-ahead LFSR architecture to prevent this decrease in the maximum period by applying segmentation technique to the conventional leap-ahead LFSR. The proposed architecture is implemented using VHDL and it is simulated in FPGA using Xilinx ISE 10.1, with a device Virtex 4, XC4VLX15. From the simulation results, the proposed architecture has only 20% hardware complexity but it can increases the maximum period of the generated random numbers by 40% compared to the conventional Leap-ahead archtecture.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.543-549
• /
• 2020

As the importance of security increases in various fields, research on a random number generator (RNG) used for generating an encryption key, has been actively conducted. A high-quality RNG is essential to generate a high-performance encryption key, but the initial pseudo-random number generator (PRNG) has the possibility of predicting the encryption key from the outside even though a large amount of hardware resources are required to generate a sufficiently high-performance random number. Therefore, the demand of high-quality true random number generator (TRNG) generating random number through various noises is increasing. This paper examines and compares the representative TRNG methods based on metastable-based and ring-oscillator-based TRNGs. We compare the methods how the random sources are generated in each TRNG and evaluate its performances using NIST SP 800-22 tests.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.923-932
• /
• 2011

Because of the instability of a flow pattern in the inlet transition square duct (hereinafter referred to as "transition duct") of a heat recovery steam generator (hereinafter referred to as "HRSG") in a combined cycle power plant, the Reynolds number in the first row of a tube bank is differs sharply from that in the sectional area of the transition duct. This causes differences in the heat flux in each tube in the tube bank. The computational fluid dynamics (CFD) predictions provide three-dimensional results for velocity, temperature, and other flow parameters over the entire domain of the duct and HRSG. A renormalization group theory (RNG) based k-${\epsilon}$�� turbulent model is used for obtaining the results cited in this study. A porous media option is used for modeling the tube banks and the number of transfer units method is used for determining the heat transfer characteristics. This study describes a comparison between the numerical simulation results and actual design output.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.291-299
• /
• 2010

Aspect-ratio-based numerical analysis is carried out to investigate the air-side convective heat transfer characteristics in compact heat exchangers with circular tubes and flat tubes-plate fins. The RNG $k-{\varepsilon}$ model is adopted for turbulence analysis. The numerical analysis is carried out for aspect ratios ranging from 3.06 to 5.44 and for Reynolds numbers ranging from 1,000 to 10,000. The calculated results indicate a correlation between the friction factor and Colburn j factor in the compact heat exchanger system for the range of aspect ratios under consideration. The results obtained for circular tubes and flat tubes-plate fins in this study can be utilized to realize the optimal design of an air conditioning system.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.383-392
• /
• 2018

For prompt gamma ray imaging for biomedical applications and environmental radiation monitoring, we propose herein a multiple-scattering Compton camera (MSCC). MSCC consists of three or more semiconductor layers with good energy resolution, and has potential for simultaneous detection and differentiation of multiple radio-isotopes based on the measured energies, as well as three-dimensional (3D) imaging of the radio-isotope distribution. In this study, we developed an analytic simulator and a 3D image generator for a MSCC, including the physical models of the radiation source emission and detection processes that can be utilized for geometry and performance prediction prior to the construction of a real system. The analytic simulator for a MSCC records coincidence detections of successive interactions in multiple detector layers. In the successive interaction processes, the emission direction of the incident gamma ray, the scattering angle, and the changed traveling path after the Compton scattering interaction in each detector, were determined by a conical surface uniform random number generator (RNG), and by a Klein-Nishina RNG. The 3D image generator has two functions: the recovery of the initial source energy spectrum and the 3D spatial distribution of the source. We evaluated the analytic simulator and image generator with two different energetic point radiation sources (Cs-137 and Co-60) and with an MSCC comprising three detector layers. The recovered initial energies of the incident radiations were well differentiated from the generated MSCC events. Correspondingly, we could obtain a multi-tracer image that combined the two differentiated images. The developed analytic simulator in this study emulated the randomness of the detection process of a multiple-scattering Compton camera, including the inherent degradation factors of the detectors, such as the limited spatial and energy resolutions. The Doppler-broadening effect owing to the momentum distribution of electrons in Compton scattering was not considered in the detection process because most interested isotopes for biomedical and environmental applications have high energies that are less sensitive to Doppler broadening. The analytic simulator and image generator for MSCC can be utilized to determine the optimal geometrical parameters, such as the distances between detectors and detector size, thus affecting the imaging performance of the Compton camera prior to the development of a real system.

• Journal of Ship and Ocean Technology
• /
• v.5 no.2
• /
• pp.27-48
• /
• 2001

Turbulent flow calculations are performed for the two modern practical VLCCs with the sable forebody and the slightly different afterbody, i.e. KVLCC and KVLCC2. Three $\textsc{k}-\varepsilon$ turbulence models are tested to investigate the differences caused by the turbulence models. The calculated results around the two VLCC hull forms using O-O grid topology and profile-fitted surface meshes are compared to the measured data from towing tank experiment. The realizable $\textsc{k}-\varepsilon$model provided realistic wake distribution with hook-like shape, while the standard and RNG-based $\textsc{k}-\varepsilon$models failed. It is very encouraging to see that the CFD with relatively simple turbulence closure can tell the difference quantitatively as well as qualitatively for the two hull forms with stern frameline modification.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.1-3
• /
• 2005

기존의 RFID 인증 프로토콜은 트래킹 공격이나 스푸핑 공격에 취약하다는 단점을 가지고 있다. 특히 해쉬기반이나 랜덤 해쉬기반 RFID 인증 프로토콜은 스푸핑 공격으로 인하여 태그와 리더간의 인증이 안전하지 못한 프로토콜이며 해쉬체인 RFID 인증 프로토콜은 리더인증이 곤란한 일방향 인증 프로토콜이다. 본 논문에서 제안하는 프로토콜은 해쉬함수와 RNG(난수생성기)만을 사용하기 때문에 저가의 수동형 RFID 시스템에서 구현이 가능할 뿐만 아니라, 트래킹 공격과 스푸핑 공격에 안전하고, 태그와 리더간의 양방향 인증이 가능한 RFID 인증 프로토콜이다.

• Wind and Structures
• /
• v.9 no.6
• /
• pp.473-492
• /
• 2006

This paper presents numerical results of pedestrian-level wind environment around the base of a row of tall buildings by CFD. Four configurations of building arrangement are computed including a single square tall building. Computed results of pedestrian-level wind flow patterns and wind speeds are compared to previous wind tunnel measurement data to enable an assessment of CFD predictions. The CFD model uses the finite-volume method with RNG $k-{\varepsilon}$ model for turbulence closure. It is found that the numerical results can reproduce key features of pedestrian-level wind environment such as corner streams around corners of upwind building, sheltered zones behind buildings and channeled high-speed flow through a building gap. However, there are some differences between CFD results and wind tunnel data in the wind speed distribution and locations of highest wind speeds inside the corner streams. In locations of high ground-level wind speeds, CFD values match wind tunnel data within ${\pm}10%$.