• Title/Summary/Keyword: RI Test

Search Result 580, Processing Time 0.026 seconds

Associations of Dietary Intake Levels with Ante-natal Depression in Pregnant Women (임부의 식이섭취 수준과 산전우울의 관련성)

  • Kim, Hae-Won
    • Women's Health Nursing
    • /
    • v.17 no.3
    • /
    • pp.256-264
    • /
    • 2011
  • Purpose: This study was conducted to identify the association of dietary intake levels with ante-natal depression among pregnant women. Methods: Secondary data analysis was done using Can Pro software (version 3.0) to evaluate the diet intake levels with 24 hour recall diary method with 130 pregnant women visiting a general hospital. Statistical analysis included descriptive statistics, t-test, Mann-Whitney U test and adjusted logistic regression using the SPSS/WIN program. Results: Whole dietary intake levels of pregnant women were insufficient according to Recommended Nutrient Intake (RI) with the except of phosphorus intake. There were significant differences in RI by gestation period and high risk pregnancies. Non-depressed women showed more intake in niacin (z=1.33, p=.018) and zinc (t=3.99, p=.048) than depressed women did. Niacin was a significant determinant of ante-natal depression (Exp (B)=5.88, p=.47, 95% CI [1.02~23.83]). Conclusion: Dietary intake assessment would be necessary during pregnancies for the screening of ante-natal depression. For ante-natal depression care, a tailored dietary intervention should be applied for women with insufficient nutrient intake.

Effect of Convex Surface Curvature on the Onset of Nucleate Boiling of Subcooled Fluid Flow in Vertical Concentric Annuli (수직 동심 환형관 내부유동에서 과냉 유체의 비등 시작 열유속에 관한 표면 볼록 곡률의 영향)

  • Byun, Jung-Hwan;Lee, Sung-Hong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.26 no.11
    • /
    • pp.1513-1520
    • /
    • 2002
  • Effect of Convex Surface Curvature on the Onset of Nucleate Boiling of Subcooled Fluid Flow in Vertical Concentric Annuli An experimental study has been carried out to investigate the effect of the transverse convex surface curvature of core tubes on heat transfer in concentric annular tubes. Water is used as the working fluid. Three annuli having a different radius of the inner cores, Ri=3.18mm, 6.35mm, and 12.70mm with a fixed ratio of Ri/Ro=0.5 are used over a range of the Reynolds number between about 40,000 and 80,000. The inner cores are made of smooth stainless steel tubes and heated electrically to provide constant heat fluxes throughout the whole length of each test section. Experimental result shows that heat flux values on the onset of nucleate boiling of the smaller inner diameter model is much higher than that of the larger size test model.

Analysis of Nonfibrous Matters in the Textiles Exhumed from Keumreung-Ri, Pajoo Application of KS Test Method (파주 금릉리 출토복식의 섬유외 성분 연구 -KS 시험규격의 활용을 중심으로-)

  • 안춘순;조한국
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.22 no.6
    • /
    • pp.772-780
    • /
    • 1998
  • The purpose of this research was to investigate the fiber content of and the characteristics of non-fibrous matters within the textiles exhumed from Keumreung-Ri, Pajoo of Kyunggi-do. Various microscopic methods' and the IR spectroscopy were used for the identification of fibers. The KS K 0251 Test Method as well as the IR spectroscopy and the SEM were used for the analysis of econ-fibrous matters. Fiber identification showed that each of the Pajoo samples were composed either of silk, cotton, or ramie. The results of the analysis of non-fibrous matters were as follows. The amount of water-extracted compound exceeded that of chloroform-extracted compound in both Pajoo 2 and Pajoo 5 samples. In Pajoo 5 sample which have already been dry cleaned using the mixed solution of n-hexane and n-dacane, the amount of chloroform extracted compound was 0% of the total extracted matter. The enzyme and HCI disintegration steps further removed the soils those were nonsoluble in water or chloroform. The most extraction was achieved at the HCI extraction stage.

  • PDF

Manufacturing Technology of a Set of Iron Bit from Eonnam-ri Site (언남리유적 철제재갈의 제작기술)

  • Chung, Kwang-Yong;Yi, Su-Hee;Seong, Hee-Won
    • 보존과학연구
    • /
    • s.26
    • /
    • pp.41-56
    • /
    • 2005
  • A set of horse bit from the Eonnam-ri site consists of three parts, pyo , ham , andinsu , and each part takes a shape of a piece of bar. According to current typological study, the pyo is S type, the insu is two-braided line type, and the outer rim of the ham is double rim type, respectively. According to X-ray test, inlaid design seems to have been decorated on the whole surface of the iron bit, originally. However, inlaid pattern partially remained. While the part of bit stopper is designed with flame pattern, the part of rein joint is designed with cloud pattern. According to XRF and XGT analysis of inlaid material, the content of silver is not more than 50%. The line inlay method making grooves on the surface of iron, then in laying a silver thread into them, and grinding the surface in a direction was adoptedin the manufacture of the iron bit.

  • PDF

A Study on the Electrical and Mechanical Properties of Conduction Cooling HTS SMES

  • Choi, Jae-Hyeong;Choi, Jin-Wook;Shin, H.S.;Kim, H.J.;Seong, K.C.;Kim, S.H.
    • Progress in Superconductivity and Cryogenics
    • /
    • v.11 no.2
    • /
    • pp.29-32
    • /
    • 2009
  • The conduction cooling HTS SMES magnet is operated in cryogenic temperature. The insulation design at cryogenic temperature is an important element that should be established to accomplish miniaturization that is a big advantage of HTS SMES. However, the behaviors of insulators for cryogenic conditions in air or vacuum are virtually unknown. Therefore, we need active research and development of insulation concerning application of the conduction cooling HTS SMES. Specially, this paper was studied about high vacuum and cryogenic temperature breakdown and flashover discharge characteristics between cryocooler and magnet-coil. The breakdown and surface flashover discharge characteristics were experimented at cryogenic temperature and vacuum. Also, we were experimented about mechanical properties of 4-point bending test. From the results, we confirmed that about research between cryocooler and magnet-coil established basic data in the insulation design.

Maternal separation in mice leads to anxiety-like/aggressive behavior and increases immunoreactivity for glutamic acid decarboxylase and parvalbumin in the adolescence ventral hippocampus

  • Eu-Gene Kim;Wonseok Chang;SangYep Shin;Anjana Silwal Adhikari;Geun Hee Seol;Dae-Yong Song;Sun Seek Min
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.27 no.1
    • /
    • pp.113-125
    • /
    • 2023
  • It has been reported that stressful events in early life influence behavior in adulthood and are associated with different psychiatric disorders, such as major depression, post-traumatic stress disorder, bipolar disorder, and anxiety disorder. Maternal separation (MS) is a representative animal model for reproducing childhood stress. It is used as an animal model for depression, and has well-known effects, such as increasing anxiety behavior and causing abnormalities in the hypothalamic-pituitary-adrenal (HPA) axis. This study investigated the effect of MS on anxiety or aggression-like behavior and the number of GABAergic neurons in the hippocampus. Mice were separated from their dams for four hours per day for 19 d from postnatal day two. Elevated plus maze (EPM) test, resident-intruder (RI) test, and counted glutamic acid decarboxylase 67 (GAD67) or parvalbumin (PV) positive cells in the hippocampus were executed using immunohistochemistry. The maternal segregation group exhibited increased anxiety and aggression in the EPM test and the RI test. GAD67-positive neurons were increased in the hippocampal regions we observed: dentate gyrus (DG), CA3, CA1, subiculum, presubiculum, and parasubiculum. PV-positive neurons were increased in the DG, CA3, presubiculum, and parasubiculum. Consistent with behavioral changes, corticosterone was increased in the MS group, suggesting that the behavioral changes induced by MS were expressed through the effect on the HPA axis. Altogether, MS alters anxiety and aggression levels, possibly through alteration of cytoarchitecture and output of the ventral hippocampus that induces the dysfunction of the HPA axis.

Factors Affecting the Performance of the Dementia Screening Test Using the Health Belief Model (건강신념모델을 적용한 치매 선별검사 수행에 영향을 미치는 요인)

  • Yoo, Ri;Kim, Gwang Suk
    • Journal of Korean Public Health Nursing
    • /
    • v.31 no.3
    • /
    • pp.464-477
    • /
    • 2017
  • Purpose: This study was conducted to investigate factors affecting the dementia screening test based on the health belief model. Methods: The survey was conducted with structured questionnaires assessing the knowledge of dementia, health beliefs, self-efficacy and cue to action for dementia screening. Study participants were 156 older adults and data from 121 respondents were analyzed. Descriptive statistics, frequency percentage, chi-squared (${\chi}^2$) test, t-test and logistic regression analysis were conducted using SPSS version 23.0. Results: Factors influencing the dementia screening test were found to be gender, self-efficacy on dementia screening, and the presence of family or friends who underwent dementia screening. Older adults who were female (OR=4.92, p=.003), showed an increasing average score of self-efficacy for dementia screening (OR=2.85, p=.002), and had family members or friends who underwent dementia screening (OR=4.60, p=.003) were more likely to receive dementia screening. Conclusion: This study showed that education and programs enhancing self-efficacy associated with the dementia screening test, as well as utilizing the network of family or friends are necessary to increase the rate of dementia screening.

Physical and Mechanical Properties of Korean Red Pine Wood from Different Growth Sites and Correlations between Them (생장지역별 소나무재의 물리적·역학적 특성과 상호 상관관계)

  • Han, Yeonjung;Lee, Hyun-Mi;Eom, Chang-Deuk
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.5
    • /
    • pp.695-704
    • /
    • 2016
  • Physical and mechanical properties of Korean red pine wood grown in Anmyeon-do, Taean-gun, Chungcheongnam-do and Sogwang-ri, Uljin-gun, Gyeongsangbuk-do, Korea were measured and each relationships between them were analyzed. The ring width and latewood proportion along radial axis in Korean red pine at two-regions were measured by collecting the growth core of stands with age class V and IX. The ring width in Korean red pine at two-regions decreased with increasing cambium age. The average ring widths in age class V and IX in Anmyeon-do and Sogwang-ri were 2.865 mm, 1.705 mm, 4.764 mm, and 2.228 mm, respectively. The ring widths in Anmyeon-do were measured from 23% to 40% smaller than Sogwang-ri. The latewood proportion was negatively related with the ring width of Korean red pine at two-regions. The relationship between physical and mechanical properties of specimens for compressive and bending strength tests were analyzed with simple regression analysis. The relationship between latewood proportion and oven-dry density were positive and statistically significant. The relationship between latewood proportion and mechanical properties was slightly positive and not statistically significant, except the specimens for bending strength test of Anmyeon-do. The relationship between oven-dry density and mechanical properties was positive. It was just statistically significant in the specimens of Sogwang-ri. The compressive and bending strengths of Anmyeon-do and Sogwang-ri were 51.3 MPa, 80.5 MPa, 37.7 MPa, and 63.7 MPa, respectively. The strength difference between two-regions was determined to due to difference of ring width and latewood proportion by age class.

A study on a user behavior about Mobile RFID Service (모바일 RFID 서비스에 대한 사용자행태에 대한 연구)

  • Han, Yoon-Sun;Chang, Mi-Ri-Nae
    • 한국HCI학회:학술대회논문집
    • /
    • 2007.02b
    • /
    • pp.639-644
    • /
    • 2007
  • 본 논문은 차세대 모바일 서비스 비즈니스로 각광받고 있는 RFID 기술이 새로운 모바일 서비스로 제공 시 고려해야할 사용자 멘탈 모델에 대하여 알아보고자 하였다. 이를 위해 무선 인터넷 사용자를 대상으로 RFID 서비스를 이용 시 어떤 방식으로 구동시키고자 하는지, 어떤 컨텐츠의 정보를 얻고자 하는 지 등에 대한 사용자 인식을 조사하고 분석함을 바탕으로 가장 현실적인 모바일 RFID 서비스의 사용방안을 예견하고 제시하는데 그 목적을 가진다.

  • PDF

능동식 헌가장치용 유압시스템에 관한 연구

  • 전용수;홍예선;이정오
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1992.04a
    • /
    • pp.390-394
    • /
    • 1992
  • This study is concerned with the hydraulic system for active suspension with a skyhook damper. The state variable equations of a sky-hook damper system are formulated forthe theoretical analysis, and the test rig of the syspension is constructed. The Simulation results show fair agreement with the experiment. It is found in the experiment that the suspension with the skyhook damper shows much better driving stability and ri ding comfort compared to that with the passive damper.