• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.459-462
• /
• 2017

In this study, we design, model, and analyze a compound generator that combines the axial flux permanent magnet (AFPM,) and radial flux permanent magnet (RFPM), which is expected to increase power generation by allowing the magnets to be placed on the upper, lower, left, and right sides of the same-sized generator. Through the design, modelling, and analysis of AFPM and RFPM compound generators, the generator load evaluation results rated output of 500.25 W and efficiency of 87.60%, respectively, at a rated speed of 600 rpm. By employing this complex generation system,these findings are expected to contribute to the activation of a small power generation system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.139-143
• /
• 2022

In this study, Among the electromagnetic induction power generation (EMG) techniques, the design specifications of the RFPM were set, and a suitable test prototype was manufactured through finite element analysis (FEM, 2D) required for characteristic calculation. In addition, a dedicated testing device (Dynamo-Tester) was designed and manufactured to measure and analyze the test prototype. The test product was measured with a test device and the result is analyzed to suggest a method that can be applied by generating as much output power as possible to charge the battery of the wearable IT device using actual kinetic energy of the human body. As a result of the test, the output power was 1.679W and the efficiency was 79.31% under the conditions of rotation speed of 780.9rpm, torque of 0.264kgf/cm, and load current of 73.6~73.9mA. Therefore, it was analyzed that it was possible to charge the wearable device with the output of the ultra-small RFPM pendulum generator.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.179.1-179.1
• /
• 2010

포항공과대학교 풍력특성화대학원에서는 3MW급 외전형 영구자석 동기발전기 설계를 진행하고 있다. 여기서 외전형이란 RFPM 발전기에서 회전자가 바깥에서 회전하는 형태로 기존의 RFPM 발전기와 비교하여 같은 공극직경에 더 많은 자석을 채택할 수 있고, 회전자와 터빈 블레이드를 직접 연결이 가능하다. 또한, 회전자를 외부에 노출 시킬 수 있으므로 냉각에 유리한 면이 있다. 설계 변수 중 출력과 회전수를 고정시키고 각 극수와 공극 직경, 전압을 변화함에 따른 전기적 특성을 비교하고, 그 중 최적의 모델을 선택한다. 선택된 모델의 전자기장 해석, 손실 계산, 열분석을 수행한다. 본 논문에서는 각 경우에 따른 결과를 비교하고 최적 모델에 대한 해석 결과에 대해 요약한다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1001-1002
• /
• 2011

Recently, issues regarding environment and the diversification of dependence in oil are watched with keen interest. Wind power attracts most interest because of its high-energy efficiency with eco friendly functions. In this paper, deal with design of radial field permanent magnet synchronous generator for a urban wind power system. Analyzed the RFPM generator by electromagnetic, and designed wind power generator with this. The output characteristic of machine and all of process is analyzed by 2D FEA due to geometrical structures of RFPM machine.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1590-1595
• /
• 2013

In this paper, the design for an electromagnetic structure and reduction cogging torque of a dual generator structured RFPM generator, which is a combination of the inner- and outer-rotor types, has been proposed. We call this a dual generator radial flux permanent magnet generator. To reduce the cogging torque, firstly, stator tooth pairing was designed; secondly, stator displacement was designed and finally, stator tooth pairing and stator displacement were carried out simultaneously. We found the optimal design condition about stator tooth pairing angle combination and stator displacement angle for cogging torque minimization. As a result, a cogging was reduced by 93.3[%] by this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.927-928
• /
• 2012

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.539-543
• /
• 2000

본 논문은 7MS320C6x01 DSP프로세서를 이용하여 원격실시간 모니터링 시스템을 설계한 연구로서 시스템구성은 성능, 규격 및 기능 둥의 조건을 수용하는 RFPM, SPM, MPM 모듈로 구성되었다. 실험 및 성능테스트는 WCDMA와 비동기 IMT-2000시스템과 연계하여 측정하였다. 측정결과 40MHz의 입력주파수에 대해 10dB 정도의 노이즈가 분포되었고 요구조건에 부합하는 통합형 원격 기지국 모니터링 운용보전에 적용하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.179.2-179.2
• /
• 2010

This research has been performed to provide fundamental design aspects of Permanent Magnet Synchronous Generators(PMSGs) for a kilowatt class wind turbine. When it comes to kilowatt class wind turbines, the typical type of generators are Axial Flux Permanent Magnet(AFPM) generators. However, Radial Flux Permanent Magnet(RFPM) generators have been optimally designed to study the output characteristics of a kilowatt class wind turbine in Graduate School of Wind Energy, POSTECH. An existing squirrel-cage rotor has been modified for another newly designed permanent magnet rotor to utilize the commercially existing stator rotor. Electromagnetic analysis utilizing Finite Element Methods tools(ANSYS, MAXWELL 2D) has been applied to analyze the system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.274-277
• /
• 2008

Pohang Wind Energy Research Center (PoWER-C) is developing a 3 MW Radial Flux Permanent Magnet (RFPM) Synchronous Generator for offshore Wind Energy Converter (WEC). The blade rotor rpm is 15.7 and the gear ratio is set to be 92.93. The nominal generator rpm at the rated load is about 1459. Baseline design with surface mounted PM magnets are completed. However, there is some concern about the excessive eddy current heating in the magnets. To alleviate this problem, another design with embedded magnet is going on. With embedded magnets, the generator length should be increased to compensate the increased flux leakage. But the field fluctuation in the magnets due to the slots are greatly reduced. This means less eddy currents and lower magnet operating temperature. In this report, engineering efforts for embedded rotor is presented.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.708_709
• /
• 2009

The small wind turbines under a few kW grades has the merits of setting up with low costs by individuals, and get the energy saving effects that, it has the secured, separate markets from the big range systems, and the developing of it is continuously proceeding. The objective of this paper is to provide the design characteristics analysis of a dual-rotor, ironless, Radial Flux Permanent Magnet(RFPM) machines for small wind turbine. This thesis is aiming mainly analyzing the characteristics of the output power of the Prototype to verify through the theoretical study and tests. The results reveal an indication of the machine best suited with respect to performance criterion for a particular design requirement.