• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1771-1774
• /
• 2005

Recently, RFID has become popular in the field of remote sensing applications. Location awareness is one of the most important keys to deploying RFID for advanced object tracking. Generally, multiple reference RF stations or additional sensors are used for the location sensing with RFID, but, particularly in indoor environments, spatial layout and cost problems limit the applicability of those approaches. In this paper, we propose a novel method for location sensing with active RFID systems not requiring the need for reference stations or additional sensors. The system triangulates the position of RF signal source using the signal pattern of the loop antenna connected to the power detector. The power detector consists of a signal strength detector and a signal analysis unit. The signal analysis unit indicates the signal strength and serial number using the signal from the strength detector, and provides the direction of the signal to the application target. We designed three different signal analysis units depending on the threshold type. The developed system can sense the direction to the transponder located over 10 m away within the maximum error of $5^{\circ}$. It falls within a reasonable range in our normal office environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.58-64
• /
• 2006

A 900-MHz band transceiver has been developed for RFID reader applications. In the transmitter, a GaAs SPST switch is used for high speed switching and low power consumption. In the receiver, a double balanced mixer is used to compress even-harmonic products. The ASK demodulator which consists of an active filter and comparator is used to reject the unwanted in band interferers. The transceiver produces a maximum transmitting power of 30 dBm and exhibits an 5 m communication range with a 6-dBi gain antenna.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.43-49
• /
• 2008

In this paper, new directional couplers for T/R switch of UHF RFID applications are proposed to overcome TX-to-RX leakage problem. The proposed method can remove TX-to-RX leakage caused by both imperfect isolation characteristic of the conventional directional coupler and the mismatch of antenna impedance. Two directional couplers are implemented using distributed elements and lumped elements respectively for the verification. The varactor tuneable circuits for compensation of the antenna mismatch is also proposed. The measurement result shows excellent TX-to-RX leakage suppression, more than 45dB in 910MHz.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.157-166
• /
• 2008

There has been a renewal of interest in management of underground facility in recent years. As several research have been made on management for underground facility of waterworks pipe. In this paper smart-tag is defined and applied to requiring ubiquitous environment. Also, GPS is essential technology for the implementation of proposed program, which has GPS and RFID mixed business model. And it manages data of underground facility with RFID system effectively and provides the high quality practical effectiveness of entire system through GPS receiving module and network communication on GIS. In conclusion, this paper proposed applications management system with location mixed database. Proposed database and interface skill is tested and evaluated through the simulation.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.881-888
• /
• 2014

This paper studies the magnetic coupling between two adjacent loop antennas that are parallel to each other in a plane and presents a new practical method to avoid the resulting magnetic coupling interference. The study focuses on the high frequency radio-frequency identification (RFID) system for casino applications, where several loop antennas are closely built into a game table to monitor gaming chips. In this case, neighboring loop antennas may severely interfere with each other by magnetic coupling, which leads to the malfunction of the RFID system. In this paper, we present a practical loop antenna with a new loop switch circuit for avoiding magnetic coupling. The loop switch circuit is integrated with a matching circuit and automatically operated by using an interrogating signal from a reader. We verified the validity of the proposed design by showing that an RFID reader with the proposed antenna can exactly and separately read the gaming chips placed on the different betting zones of a game table.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.176-184
• /
• 2012

In this paper, the effects of a metal plane on the performance of a meandered slot RFID antenna are evaluated in a real environment, and 3 metal plane cases are considered (the most likely scenarios in which metal conductive materials are placed near the tag antenna). The metal plane effects can be categorized as matching degradation and antenna gain variation. First, matching degradation due to the antenna's induced mutual impedance is experimentally investigated. In addition, the gain variation is investigated to figure out the change in the radiation characteristics. With the derived antenna parameters, the read range is calculated with the Friis transmission equation and measured to analyze the effects of a metal plane on RFID system performance. The calculated and measured read range varies from 9.3 m to 19.1 m as the distance between the RFID antenna and the metal plane changes.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.191-192
• /
• 2006

An orthogonal antenna is presented for reader applications of radio frequency identification (RFID) at 433 MHz. The antenna is composed of two $1{\times}2$ sub-arrays orthogonally placed on a ground plane. Two different feeding networks are introduced to control horizontal and vertical radiation current flows for each sub-array, respectively. An inverted-F structure is used as a radiation element with vertical and horizontal currents flowing on the radiator, thereby obtaining two linear polarizations. Antenna gains are 3.71 and 3.43 dBi and isolation between the two input ports is less than 25dB.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.161-166
• /
• 2006

Recently various applications have been proposed to improve supply chain process and management by not only using various management theories such as JIT(just In Time) and SCM(Supply Chain Management) but also utilizing emerging technology like RFID(Radio Frequency Identification). But existing research was merely focused on the use of the theories and technology on a particular work or material. Therefore, the objective of this study is to derive basic types of construction supply chain management which spans from manufacturing to installation at the construction site. This research proposes the seven types of construction supply chain processes, which has been derived based on the progress management theory and budget items for construction project. It is expected that the result of this study can be applied for RFID-based construction supply chain management as well as more efficiencies in various management areas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.63-70
• /
• 2015

In this paper, a receiver has been developed in a $0.11-{\mu}m$ CMOS technology for 900 MHz RFID communication system applications. The receiver is composed of an envelope detector, a low-pass-filter, a comparator, D flip-flops, as well as an oscillator to provide the clock for digital blocks. The receiver is designed for low power consumption, which would be suitable for passive RFID tags. In this circuit, a digital data slicer was employed instead of the conventional analog data slicer in order to reduce the power consumption. The clock frequency is 1.68 MHz and the circuit operates with a power consumption as small as $5{\mu}W$. The chip size is $325{\mu}m{\times}290{\mu}m$ excluding the probing pads.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.3
• /
• pp.405-415
• /
• 2012

In many applications a reader needs to determine whether a particular tag exists within a group of tags without a server. This is referred to as serverless RFID tag searching. A few protocols for the serverless RFID searching are proposed but they are the single tag search protocol which can search a tag at one time. In this paper, we propose a multi-tag search protocol based on a hash function and a random number generator which can search some tags at one time. For this study, we introduce a protocol which can resolve the problem of synchronization of seeds when communication error occurs in the S3PR protocol[1], and propose a multi-tag search protocol which can reduce the communication overhead. The proposed protocol is secure against tracking attack, impersonation attack, replay attack and denial-of-service attack. This study will be the basis of research for multi-tag serach protocol.