• Journal of the military operations research society of Korea
• /
• v.32 no.2
• /
• pp.40-55
• /
• 2006

The objective of this paper is to provide an introductory scheme of Supply Chain Management(SCM) for the Air Force logistics support system. To accomplish our goal, we analyzed the successful example of the military logistics reform based on SCM in the United States, after we observed the concept and concerning methods of SCM. The introductory scheme of SCM was specifically provided on the transportation system and material information system of the aircraft repair parts, which are considered important in the Air Force logistics support system. The Air Force will be able to raise the complete mission supportability through the construction of an innovative logistics support system, which is low in cost and efficient, based on state of the art information and communication technology.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.82-89
• /
• 2008

최근, GIS 분야에서 RFID와 GPS 센서 같은 위치 및 공간 데이타를 포함하는 다양한 GeoSensor의 활용으로 수집되는 공간 데이타가 크게 증가하면서, 대용량 공간 데이타의 빠른 처리를 위한 공간 인덱스의 중요성이 높아지고 있다. 특히, 대표적인 공간 인덱스인 R-Tree를 기반으로 검색 성능을 높이기 위한 연구가 활발히 진행되고 있다. 그러나, 기존 연구는 R-Tree에서 노드의 MBR 간의 겹침이나 트리 높이를 어느 정도 줄임으로써 다소 검색 성능을 향상시켰지만, 트리 검색에서 발생하는 불필요한 노드 접근 비용 문제를 효율적으로 해결하지 못하고 있다. 본 논문에서는 이러한 문제를 해결하고 R-Tree에서 대용량 공간 데이타의 빠른 검색을 제공하는 인덱스인 HR-Tree(Hash based R-Tree)를 제시한다. HR-Tree는 트리 검색 없이 R-Tree 리프 노드를 직접 접근할 수 있는 해시 테이블을 이용함으로써 R-Tree의 검색 성능을 높인다. 해시 테이블은 데이타 영역을 차원에 따라 반복적으로 분할한 Partition과 대응되는 R-Tree 리프 노드의 MBR과 포인터들로 구성된다. 각 Partition은 생성 과정에서 고유의 식별 코드를 갖기 때문에 Partition 코드가 주어지면 해시 테이블에서 해당 레코드를 쉽게 접근할 수 있다. 또한, HR-Tree는 R-Tree구조의 변경없이 다양한 R-Tree 변형 구조에 쉽게 적용할 수 있는 장점이 있다. 마지막으로 실험을 통하여 HR-Tree의 우수성을 입증하였다.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.271-277
• /
• 2012

In this paper, we propose a dynamic tree formation protocol for multiple UAV which is gathering data or accomplishing a mission such as disaster monitoring, environment monitoring, and disaster relief. Especilly, we designed Hop-LQI Weight algorithm to form optimal tree in wireless dynamic environment applying situation of radio signal attenuation over distance and implemented our algorithm in MSP 430 K-mote sensor platform using TinyOS codes. We verified performance of our algorithm by comparing average link setup time by the number of nodes with minimum LQI, link cost calculation method in wireless communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.626-629
• /
• 2003

In this paper, a system that implementation of Biometric System Using RF-ID. We organize a certification system which the security is strengthened, the information is flowed out and the presentation will do the possibility not to be abused. The loss of the credit card and problems which there is many of forgery back are happening. To solve such problems, We organized the system to use after we stored a fingerprint data at RF Card and going through certification necessary formalities. Various research to be related uses this system and is predicted. The development to common use goods will be possible through a certification procedure.

• Journal of KIBIM
• /
• v.7 no.1
• /
• pp.45-53
• /
• 2017

Continuous research efforts have been made on acquiring location data on construction sites. As a result, GPS and RFID are increasingly employed on the site to track the location of equipment and materials. However, these systems are based on radio frequency technologies which require attaching tags on every target entity. Implementing the systems incurs time and costs for attaching/detaching/managing the tags or sensors. For this reason, efforts are currently being made to track construction entities using only cameras. Vision-based 3D tracking has been presented in a previous research work in which the location of construction manpower, vehicle, and materials were successfully tracked. However, the proposed system is still in its infancy and yet to be implemented on practical applications for two reasons. First, it does not involve entity matching across two views, and thus cannot be used for tracking multiple entities, simultaneously. Second, the use of a checker board in the camera calibration process entails a focus-related problem when the baseline is long and the target entities are located far from the cameras. This paper proposes a vision-based method to track multiple workers simultaneously. An entity matching procedure is added to acquire the matching pairs of the same entities across two views which is necessary for tracking multiple entities. Also, the proposed method simplified the calibration process by avoiding the use of a checkerboard, making it more adequate to the realistic deployment on construction sites.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.1
• /
• pp.81-88
• /
• 2005

The POS system has been developing into an co-operational information integration system, enlarging its range of application - from basic data collection to production information, inventory management and customer service. The POS system will increase operation efficiency. It is my suggestion that POS system should be adopted in domestic industries regardless of increasing adoption of the RFID. This paper was made studied of the POS system and the practical use of POS system in order to maximize the efficiency of inventory management for various companies.

• 한국IT서비스학회:학술대회논문집
• /
• 2003.05a
• /
• pp.591-597
• /
• 2003

모바일 서비스는 공급사슬의 모든 단계와 연관되어 있는데, 특히 재고 주문관리, 주문 충족, 구매, 물류와 모니터링 분야와 밀접히 관련시켜 볼 수 있다. 기본적으로 모바일 서비스의 핵심은 참가자들 간에 정보의 공유로서 이를 통해서 공급사슬의 지각과 반응의 효율을 높일 수 있다. 모바일 서비스의 장점은 편재성(ubiquity), 속도, 추적, 위치확인, 개인화와 안전성에 있다. 공급사슬의 3가지 중요한 요소는 속도, 변화 및 가시성을 들 수 있는데, 모바일 서비스는 이 세가지 분야를 충족시킬 수 있다. 본 연구의 목적은 모바일 서비스를 이용해서 wireless 공급 웹을 모델링 하고자 한다. 재고관리, 원격 진단, 현장 작업자와의 통신, 추적과 모니터링을 포함한 고객요구 충족, 재고의 가시성, 실시간 shop floor data collection, 자산 추적 및 창고관리분야에 적용가능한 고객중심의 공급 웹을 모델링하고 RFID를 이용해서 창고관리 문제에 대한 프로토타입을 제시하고자 한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2240-2250
• /
• 2016

MIFARE Classic is the most popular contactless smart card, which is primarily used in the management of access control and public transport payment systems. It has several security features such as the proprietary stream cipher Crypto 1, a challenge-response mutual authentication protocol, and a random number generator. Unfortunately, multiple studies have reported structural flaws in its security features. Furthermore, various attack methods that target genuine MIFARE Classic cards or readers have been proposed to crack the card. From a practical perspective, these attacks can be partitioned according to the attacker's ability. However, this measure is insufficient to determine the optimal attack flow due to the refined random number generator. Most card-only attack methods assume a predicted or fixed random number, whereas several commercial cards use unpredictable and unfixable random numbers. In this paper, we propose optimal MIFARE Classic attack procedures with regards to the type of random number generator, as well as an adversary's ability. In addition, we show actual attack results from our portable experimental setup, which is comprised of a commercially developed attack device, a smartphone, and our own application retrieving secret data and sector key.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2140-2146
• /
• 2009

Since tags do not have location informations, the identifiers of tags which are symbolic data are used as the location informations. Therefore, it is difficult to define the proxmity between two trajectories of tags and inefficient to process the user queries for tags. In this paper, we define the perceptual space to model the location of a tag and propose the proximity of the perceptual spaces. The proximity of the perceptual spaces is composed of the static proximity and dynamic proximity. Using the proximity of the perceptual spaces, it is possible to measure the proximity between two trajectories of tags and build the efficient indexes for tag trajectories. We evaluated the performance of the proposed proximity function for tag trajectories on the IR-tree and the $R^*$-tree.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.689-709
• /
• 2010

In this paper, a low cost, low power but multifunctional wireless sensor node is presented for the impedance-based SHM using piezoelectric sensors. Firstly, a miniaturized impedance measuring chip device is utilized for low cost and low power structural excitation/sensing. Then, structural damage detection/sensor self-diagnosis algorithms are embedded on the on-board microcontroller. This sensor node uses the power harvested from the solar energy to measure and analyze the impedance data. Simultaneously it monitors temperature on the structure near the piezoelectric sensor and battery power consumption. The wireless sensor node is based on the TinyOS platform for operation, and users can take MATLAB$^{(R)}$ interface for the control of the sensor node through serial communication. In order to validate the performance of this multifunctional wireless impedance sensor node, a series of experimental studies have been carried out for detecting loose bolts and crack damages on lab-scale steel structural members as well as on real steel bridge and building structures. It has been found that the proposed sensor nodes can be effectively used for local wireless health monitoring of structural components and for constructing a low-cost and multifunctional SHM system as "place and forget" wireless sensors.