• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1342-1350
• /
• 1999

In this paper, we have developed and analyzed the 2.45GHz microwave RFID system. Which is composed tag and interrogator using custom IC, and we have made the software driving the hardware for the bidirectional data transmission method. Using 3.6V power supply was used, the optimal identification range in the information transmission of the designed microwave RFID system operating at 9,600bps was l0m. In the control circuit of the tag, the low current consumption of 15$mutextrm{A}$ and the tag data transmission rate of 90% when the moving velocity was 80km/h.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1500-1510
• /
• 2007

In recent, rapid and accurate processing for logistics have been required, according as logistics has grown dramatically. Especially, identifying, locating, or tracking objects in ports are important, because ports are gateways to extended markets. In this paper, we describe the design and implementation of a smart tag system for ubiquitous port logistics. Our solution consists of three parts: an active RFID to identify objects, an electronic container seal to charge with security of containers, and a RTLS system to locate objects. Because identification technology for logistics can be read by heterogenous systems, compliance with the international standard is one of the most critical issues. This paper introduces the method to maintain compliance with ISO, and conducts some verifications. In addition, we analyze the system performance such as lifetime, identification rate, and time for multiple tag identification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1569-1580
• /
• 2016

For the 2.4 GHz active RFID to be successful in the market, one of the requirements is the increased battery life. However, currently we do not have any accurate power consumption estimation method. In this study we develop a simulation model, which can be used to estimate power consumption of tag accurately. Six different simulation models are proposed depending on collision algorithm and query command method. To improve estimation accuracy, we classify tag operating modes as the wake-up receive, UHF receive, sleep timer, tag response, and sleep modes. Power consumption and operating time are identified according to the tag operating mode. Query command for simplifying collection and ack command procedure and newly developed collision control algorithm are used in the simulation. Other performance measures such as throughput, recognition time for multi-tags, tag recognition rate including power consumption are compared with those from the current standard ISO/IEC 18000-7.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.459-462
• /
• 2010

반도체 공정에서 Track In/Out 판단을 위해서 바코드와 RFID(Radio-Frequency IDentification)가 주로 사용되고 있다. 현재 알려진 바코드 인식률은 약 80%로써 재고 유실이 여전히 존재하며 정확성과 신뢰성을 담보하지 못하고 있는 현실이다. 이 연구에서는 20% 정도의 인식되지 않은 부분을 보완하기 위해 바코드를 영상 처리하고 그 내부에 있는 문자들을 인식하는 프로그램을 개발한다. 해당 공정에서 바코드가 제대로 인식이 안 된 경우에는 인식된 문자들을 참고함으로써 공정의 전체 과정을 파악하고 트랙킹할 수 있다. 바코드의 문자 인식을 생산 공정에 맞추어 실시간에 수향하여 필요시 활용함으로써 공정의 정확성과 생산성을 향상에 기여하고자 한다.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.328-338
• /
• 2008

Most speech recognition systems that have a large capacity and high recognition rates are isolated word speech recognition systems. In order to extend the scope of recognition, it is necessary to increase the number of words that are to be searched. However, it shows a problem that exhibits a decrease in the system performance according to the increase in the number of words. This paper defines the context information that affects speech recognition in a ubiquitous environment to solve such a problem and develops user localization method using inertial sensor and RFID. Also, we develop a new speech recognition system that demonstrates better performances than the existing system by establishing a word model domain of a speech recognition system by context information. This system shows operation without decrease of recognition rate in smart home environment.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.35-41
• /
• 2010

In order to improve the productivity and the yield at assembling line of finished goods' manufacturers, it is necessary that the fabricated parts are supplied to the assembly line not only just in time (JIT) but also just in sequence (JIS). Parts that are not delivered just in time can cause assembly line to be delayed, and parts that are not delivered just in sequence can cause assembly line to be halted or defected products. For JIT and JIS implementation, in the paper we propose the smart pallet based just-in-sequence parts delivery system in which RFID and USN technologies are converged. Compared with the bar-code based just-in-sequence parts delivery system, the proposed system can reduce unnecessary time for confirming parts' type and sequence and unnecessary cost by bar-code labeling and sequence data' documenting. The proposed system also can overcome the drawbacks of the RFID based just-in-sequence parts delivery system such as transmission range limit and difficulties of confirming parts' type and sequence in real time. Finally, we show the implementation of the proposed system, and its practicality.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.23-31
• /
• 2009

Since 9.11 terrorist attacks against the USA, the new paradigm for "supply chain security" has been established. And at the same time a lot of researches are being made on supply chain security by many foreign companies or research institutes. However, domestically the terms "supply chain security" themselves are not yet familiar, and the paradigm of security are not being used in the logistics, while little researches are being made on them But recently along with development of "ConTracer," a supply chain security technology, which is to be used as the equipment for container cargo transportation safety based on RF1D technology, related researches have begun to be activated. The key issues for the development of equipment for container transportation safety are to obtain both a high recognition rate and enough recognition distance. To this end, this study has tested the ConTracer (433 MHz type and 2.4 GHz type) by using Taguchi Method. According to our test results, in the case of 433 MHz type, it is a little more effective that the reader faces to the front-right side, and in the case of 2.4 GHz, reader direction does not make difference in the view of sensitivity. The test also has proved that it is better that antenna location, as expected, is to be installed on the outside for both types alike.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.333-338
• /
• 2012

Human resource management is bringing the various changes with the IT technology. In particular, if HRM is non-scientific method such as group management, physical plant, working hours constraints, personal contacts, etc, the current enterprise human resources management(e-HRM) appeared in the individual dimension management, virtual workspace (for example: smart work center, home work, etc.), working time flexibility and elasticity, computer-based statistical data and the scientific method of analysis and management has been a big difference in the sense. Therefore, depending on changes in the environment, companies have introduced a variety of techniques as RFID card, fingerprint time & attendance systems in order to build more efficient and strategic human resource management system. In this paper, time and attendance, access control management system was developed using multi camera for 2D and 3D face recognition technology-based for efficient enterprise human resource management. We had an issue with existing 2D-style face-recognition technology for lighting and the attitude, and got more than 90% recognition rate against the poor readability. In addition, 3D face recognition has computational complexities, so we could improve hybrid video recognition and the speed using 3D and 2D in parallel.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.138-143
• /
• 2008

RFID 기술은 기존의 바코드 기술보다 발전된 무선의 비접촉 인식 기술로서, 유비쿼터스 컴퓨팅의 핵심기술로 간주되고 있다. RFID 태그는 기존의 단순한 사물의 인식 기능 중심에서 사물의 상태 및 환경 정보를 감지할 수 있는 센서 태그로의 발전으로 물류 프로세스의 양적, 질적 향상을 도모할 수 있게 되었다. 센서 태그는 환경 정보를 센싱하기 위하여 배터리를 내장하고 있으며, RF Transceiver의 내장 유무에 따라 자체적으로 신호를 보낼 수 있는 active 센서 태그와 리더로부터의 신호를 사용하는 semi-passive 센서 태그로 구분된다. Semi-passive 센서 태그는 배터리를 부착함으로써 passive 태그에 비해 인식률과 인식거리가 향상되었고 active 태그에 비해 단가가 매우 저렴하여 센서 태그가 부착된 물품의 상태를 모니터링하고 환경을 감시하는 다양한 응용에 사용될 수 있다. 이러한 응용의 요구에 따라 Edge Manager는 기존의 passive 태그는 물론 센서 태그를 지원함으로써 상위 응용에게 정제된 결과를 전달할 필요성이 있다. 본 논문에서는 특히 semi-passive 센서 태그를 지원하는 Edge Manager의 설계를 위하여, 센서를 사용한 또 다른 활용 분야인 센서 네트워크에서의 질의 유형을 분석하고, semi-passive 센서 태그의 특징을 고려한 요구사항을 분석한다. Semi-passive 센서 태그는 센서 네트워크의 센서 노드와는 달리 태그 레벨에서 필터링과 병합을 수행할 수 없으므로 Edge Manager에서 이러한 기능이 제공되어야 한다. 본 논문에서는 Edge Manager에서의 센서 태그 데이터에 대한 질의를 위한 방법으로 EPCglobal ALE 표준명세의 ECSpec을 확장하는 방법을 제안하고, 센서 태그 데이터의 특성을 고려한 필터링 기법과 병합(aggregation) 기법을 적용한 질의 처리가 가능한 Edge Manager의 구조를 제시한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.664-665
• /
• 2016

This paper proposes an identification system based on QR (Quick Response) code for production and disposal information of Internet of Things (IoT) devices. Three thousands and five hundreds of electronic devices have replaced and discarded in South Korea in a year, and twenty millions to fifty millions tons of e-wastes have happened throughout the world every year. According to Gartner, market research institution, the number of IoT devices will increase from 2.3 billions in 2013 to 30 billions in 2020, however, the regulations and systems which take into account environment were not prepared. The identification systems for reflecting information of devices, which are produced or discarded, are required to resolve the problem. The proposed identification system based on QR code can store much more massive data such as the producer, product's model, serial number, recycling rate, recovering rate, recyclability rate, recoverability rate than RFID (Radio-Frequency Identification). Also, users can immediately recognize production and disposal information by a QR code application in a smartphone.