Abstract
Since 9.11 terrorist attacks against the USA, the new paradigm for "supply chain security" has been established. And at the same time a lot of researches are being made on supply chain security by many foreign companies or research institutes. However, domestically the terms "supply chain security" themselves are not yet familiar, and the paradigm of security are not being used in the logistics, while little researches are being made on them But recently along with development of "ConTracer," a supply chain security technology, which is to be used as the equipment for container cargo transportation safety based on RF1D technology, related researches have begun to be activated. The key issues for the development of equipment for container transportation safety are to obtain both a high recognition rate and enough recognition distance. To this end, this study has tested the ConTracer (433 MHz type and 2.4 GHz type) by using Taguchi Method. According to our test results, in the case of 433 MHz type, it is a little more effective that the reader faces to the front-right side, and in the case of 2.4 GHz, reader direction does not make difference in the view of sensitivity. The test also has proved that it is better that antenna location, as expected, is to be installed on the outside for both types alike.
미국에서 발생한 9.11 테러 이후 물류보안(Supply Chain Security)에 대한 패러다임이 발생하였으며, 국외의 관련 기업과 기관들은 물류보안을 위하여 다양한 연구들을 진행하였다. 하지만 국내의 경우 물류보안이라는 용어 자체가 생소할 뿐만 아니라 보안에 관한 패러다임이 물류부분까지 확산되지가 않아서 관련 연구가 부족한 실정이었으나, 최근에 물류보안 기술 중의 하나로서 RFID 기반 컨테이너 화물 안전수송 장비인 ConTracer(Container Tracer)를 개발하는 등 관련 연구가 활성화되기 시작하였다. 현재 개발되고 있는 컨테이너 화물 안전수송 장비들의 주요 이슈는 높은 인식률과 충분한 인식거리가 확보되는 것이며, 본 연구에서는 이러한 목적을 달성하기 위하여 다구찌 방법론을 활용하여 ConTracer(433MHz 타입, 2.4GHz 타입)의 인식률 향상을 위한 다양한 실험을 하였다. 실험결과 433MHz 주파수에서는 리더기의 방향을 전방우측으로 향하는 것이 다소 유리하고, 2.4GHz 주파수에서는 크게 영향을 미치지는 못하는 것으로 나타났으며, 안테나의 위치는 예상했던 대로 두 주파수 모두 외부에 설치하는 것이 인식률 향상에 유리한 것으로 분석되었다.