• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.398-407
• /
• 2007

In this paper we proposed the tag antenna with a low performance distortion from an attached surface material using the asymmetric dual-arm dipole antenna(ADDA) structure. The tag is designed to exhibit low performance changes when the tag is attached on a target object(the medical litter receptacle, ${\varepsilon}_r=1.7,\;tan\;{\delta}=0.002$). Detail design parameters for the proposed antenna are optimized to maintain a good readable range in free-space as well as on a target object. The size of the optimized antenna is $100\;mm{\times}50\;mm$. The antenna shows the matching bandwidth($S_{11}$< -10 dB) of 3.7 % and the radiation efficiency of 80 % at the operating frequency. Finally we confirmed the readable range of the tag antenna by measurement and it shows about 5.3 m in free space and 5.5 m on the target object.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.75-79
• /
• 2015

In this paper, a dual band antenna with the operating frequency in HF and UHF band was proposed. The antenna structure consists of three spiral turns coil in the bottom side to generate the HF frequency of 13.56 MHz. In the top of the antenna, an inverted-spiral dipole structure is used to create the UHF frequency of 922 MHz. The dual band antenna was optimized to reduce size with $80mm{\times}40mm{\times}0.8mm$ dimension. The antenna presents the omnidirectional characteristic with high gain. To validate the theoretical design, the antenna was simulated using FR-4 substrate and verified the simulation results.

• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.304-310
• /
• 2008

Our ocean where three sides are the seas is the state that the environmental pollution damage is serious because of all kinds of wastes. Therefore, environmental pollution will be considerably decreased if we leans forward in the saddle to manage net which is conquering a section equivalent among wastes and will be helpful to marine ecosystem. This study is to develop a fishing net management system identifying nets cast and withdrawn from the vessel The purpose of FNMS is to manage sailing vessels arrival and departure details in order to manage a net abandoned in the ocean, and restrain the occurrence of the wasted net abandoned without permission in the ocean, and prevent environmental pollution and sailing vessels sank in and around the ocean.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.535-543
• /
• 2009

This paper describes a design for RFID(Radio Frequency Identification) tag antenna using license plate attached the vehicle bumper in 900 MHz band. The proposed tag antenna size which is located on upper center position of a vehicle license plate is 162.5${\times}$40${\times}$1 mm$^3$. A resonant frequency of design antenna and the bandwidth which has return loss of -10 dB below are 900 MHz and about 720 MHz(640${\sim}$1,360 MHz), respectively. The commercial chip impedance considered on design was 16- j131 ${\Omega}$ and the complex conjugate impedance of chip was used as input impedance of tag antenna. The measured return loss and radiation pattern were agreed well with the calculated results. The measured readable range of the proposed tag antenna designed on only the vehicle license plate was 11.5 m. Moreover, its range of the fabricated tag antenna that the license plate and the vehicle bumper were fixed by volt and nut was observed 10.4 m. These measured readable range showed about 5 m above far distance more than the average readable range of commercial tag antenna.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.206-209
• /
• 2016

This letter proposes a reconfigurable directional coupler that uses a variable impedance mismatch reflector to achieve high isolation characteristics in the antenna front end. The reconfigurable coupler consists of a directional coupler and a single-pole four-throw (SP4T) switch with different load impedances as a variable load mismatch reflector. Selection of the load impedance by the reflector allows cancellation of the reflected signal due to antenna load mismatch and the leakage from the input to isolation port of the directional coupler, resulting in high isolation characteristics. The performance of the proposed architecture in separating the received (Rx) signal from the transmitted (Tx) signal in the antenna front end was verified by implementing and testing the reconfigurable coupler at 917 MHz for UHF radio-frequency identification (RFID) applications. The proposed reconfigurable directional coupler showed an improvement in the isolation characteristics of more than 20 dB at the operation frequency band.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3140-3145
• /
• 2012

In this paper, a design method for a compact slot antenna fed by a coplanar waveguide (CPW) is studied. A T-shaped tuning stub is inserted inside a narrow rectangular slot and the slot is impedance matched to the CPW feedline by adjusting the width, length, and position of the stub. The resonance frequency is adjustable by the slot length and the antenna size can be reduced by bending the slot. The resonance frequency and impedance matching property of the compact slot antenna are similar to those of the half-wavelength slot antenna, which enables one to design compact antenna of this type with ease. A compact slot antenna for 2.45-GHz ISM band is designed, fabricated on an FR4 substrate (dielectric constant of 4.4 and thickness of 0.8 mm), and experimentally tested. The measured results agree well with the simulations, which confirms the validity of this study. The fabricated compact slot antenna shows an impedance bandwidth of 200 MHz(2.32-2.52 GHz) for a VSWR < 2, which is suitable for 2.45-GHz ISM band (2.4-2.48 GHz). The measured radiation patterns show ${\infty}$-shaped directional pattern in the E-plane and nearly omni-directional pattern in the H-plane with a peak gain of 2.0 dBi, which are similar to those of a monopole antenna. The proposed antenna is expected to be suitable for the applications as antennas for WLAN, RFID, and mobile handset.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.551-555
• /
• 2011

The Crab label tag with a loop matching feed and a modified dipole antenna structure was proposed. The antenna impedance is conjugated easily to a radio frequency identification IC chip impedance by a loop matching feed. The reading range of the crab structure tag is 0.9-1.0 m from the upper side of the formula milk can lid. The fabricated label tag size is $44.0{\times}44.0mm^2$. The operating frequency at -3 dB return loss is 861.0-929.0 MHz, and the maximum reading range at the anechoic chamber is 1.5 m.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.23-31
• /
• 2009

Since 9.11 terrorist attacks against the USA, the new paradigm for "supply chain security" has been established. And at the same time a lot of researches are being made on supply chain security by many foreign companies or research institutes. However, domestically the terms "supply chain security" themselves are not yet familiar, and the paradigm of security are not being used in the logistics, while little researches are being made on them But recently along with development of "ConTracer," a supply chain security technology, which is to be used as the equipment for container cargo transportation safety based on RF1D technology, related researches have begun to be activated. The key issues for the development of equipment for container transportation safety are to obtain both a high recognition rate and enough recognition distance. To this end, this study has tested the ConTracer (433 MHz type and 2.4 GHz type) by using Taguchi Method. According to our test results, in the case of 433 MHz type, it is a little more effective that the reader faces to the front-right side, and in the case of 2.4 GHz, reader direction does not make difference in the view of sensitivity. The test also has proved that it is better that antenna location, as expected, is to be installed on the outside for both types alike.

• Journal of Information Management
• /
• v.41 no.4
• /
• pp.41-67
• /
• 2010

Augmented reality technology was invented for military purposes at the beginning. But the development of wireless and location based technology in 2000s makes AR services reach the age of innovation. Especially, it attracts attention as a media which enriches our perception. There is a potential that it can extend the virtual information in the real world from optical sense to auditory, tactile, and olfactory sense. This study proposed the interactive information service system and method based on AR. To do it, technical background on AR was analyzed and a method to apply the technology was examined. Especially, as a eco service, this study proposed new information service using 2D bar code in a library for user need and convenience in ubiquitous environment. The proposed service system can optimize practical utilization of information resources in virtual and real reality as consolidating analog and digital resources in a library.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.327-332
• /
• 2017

As Internet of Things (IoT) technology advances, there is a growing demand for location-based services (LBSs) to identify users' mobility and identity. The initial LBS system was mainly used to measure position information by measuring the phase of a signal transmitted from a global positioning system (GPS) satellite or by measuring distance to a satellite by tracking the code of a carrier signal. However, the use of GPS satellites is ineffective, because it is difficult to receive satellite signals indoors. Therefore, research on wireless communications systems like ultra-wide band (UWB), radio frequency identification (RFID), and ZigBee are being actively pursued for location recognition technology that can be utilized in an indoor environment. In this paper, we propose an LBS system that includes the 2.45GHz band for chirp spread spectrum (CSS), and the 3.1-10.6GHz band and the 250-750MHz bands for UWB using the IEEE 802.15.4a standard for low power-based location recognition. As a result, we confirmed that the 2.45GHz Industrial, Scientific and Medical (ISM) band RF transceiver and the ranging function can be realized in the hardware and has 0dBm output power.