• 한국항해항만학회지
• /
• 제28권5호
• /
• pp.429-434
• /
• 2004

본 논문은 순차적으로 전압 인가된 RF MEMS 스위치를 이용하여 재구성 슬롯 안테나를 설계하였다. MEMS 스위치의 구동전압은 하부 전극과 상부 스위치 사이의 에어캡 높이에 따른 스위치의 특성을 ANSYS 시뮬레이션으로 분석하였다. MEMS 스위치의 구동전압은 하부전극과 상부 스위치 사이의 에어캡 높이와 스위치 형상에 의해 결정된다. 설계된 MEMS 스위치의 길이는 각각 240$\mu\textrm{m}$, 320 $\mu\textrm{m}$, 400 $\mu\textrm{m}$ 이고, 에어캡은 6$\mu\textrm{m}$이었다. 설계된 슬롯 안테나는 전체크기가 10 mm x 10 mm이며, 슬롯의 크기는 길이가 500 $\mu\textrm{m}$, 폭이 200 $\mu\textrm{m}$이었다. 그리고 CPW 급전선은 전체의 길이는 5 mm이며, 입구에서의 CPW는 30-80-30 $\mu\textrm{m}$이괴, 슬롯에서의 CPW는 150-300-150 $\mu\textrm{m}$이다. 세안된 소사의 공진주파수의 튜닝은 RF MEMS 스위치에 DC 바이어스를 인가함으로서 안테나의 전기적인 길이를 변화시켜 이루어진다. 설계된 슬롯 안테나를 시뮬레이션, 제조 및 측정을 하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권1호
• /
• pp.70-83
• /
• 2001

In this paper, the recent progress of RF MEMS research for wireless/mobile communications is reviewed. The RF MEMS components reviewed in this paper include RF MEMS switches, tunable capacitors, high Q inductors, and thin film bulk acoustic resonators (TFBARs) to become core components for constructing miniaturized on chip RF transceiver with multi-band and multi-mode operation. Specific applications are also discussed for each of these components with emphasis on for miniaturization, integration, and performance enhancement of existing and future wireless transceiver developments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.129-129
• /
• 2009

In this paper, a tunable microstrip patch antenna designed using RF MEMS switches is reported. The design and simulation antenna were performed using high frequency structure simulator (HFSS). The antenna was designed in ISM Band and operates simultaneously at 2.4 GHz and 5.7 GHz with a -10 dB return-loss bandwidth of 20 MHz and 180 MHz, respect-tively. To obtain high efficiency and improve integrated ability, the High Resistivity Silicon (HRS) wafer was used for the antenna. The antenna achieved high gain with 8 dB at 5.7 GHzand 1.5 dB at 2.4 GHz. The RF MEMS DC contact switches was simulated and analysis by ANSYS software.

• 센서학회지
• /
• 제20권3호
• /
• pp.145-150
• /
• 2011

In this paper, we designed a tunable microstrip patch antenna using RF MEMS switches. The design and simulation of the antenna were performed using a high frequency structure simulator(HFSS). The antenna was designed for use in the ISM band and either operates at 2.4 GHz or 5.7 GHz achieving -10 dB return-loss bandwidths of 20 MHz and 180 MHz, respectively. In order to obtain high efficiency and improve the ease of integration, a high resistivity silicon(HRS) wafer on a glass substrate was used for the antenna. The antenna achieved high gains: 8 dB at 5.7 GHz and 1 dB at 2.4 GHz. The RF MEMS DC contact switches were simulated and analyzed using ANSYS software.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1507_1508
• /
• 2009

This study proposes a composite right/left-handed transmission line (CRLH-TL) that permits switching between the right-handed (RH) and left-handed (LH) modes using single crystalline silicon (SCS) RF MEMS switches. It is possible to change modes from the RH to LH mode, or vice versa, by controlling the admittance of capacitors and the impedance of inductors using switch operations. The proposed switchable CRLH-TL consists of SCS RF MEMS switches, metal-insulator-metal (MIM) capacitors and shunt inductors. At 8 GHz, the fabricated device shows a phase response of $87^{\circ}$ with an insertion loss of 2.7 dB in the LH mode, and a phase response of $-77^{\circ}$ with an insertion loss of 0.56 dB in the RH mode.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.882-885
• /
• 2011

This paper presents testing and self-calibration of RF circuits using MEMS switches to identify process-related defects and out of specification circuits. We have developed a novel multi-tone dither test technique where the test stimulus is generated by modulating the RF carrier signal with a multi-tone signal generated using an Arbitrary Waveform Generator (AWG) with additive white Gaussian noise. This test stimulus is provided as input to the RF circuit and peak-to-average ratio (PAR) is measured at the output. For a faulty circuit, a significant difference is observed in the value of PAR as compared to a fault-free circuit. Simulation is performed for various circuit conditions such as fault-free as well as fault-induced and their corresponding PARs are stored in the look-up table. This testing and self-calibration technique is exhaustive and efficient for present-day communication systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.562-563
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.325-326
• /
• 2011

• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.172-176
• /
• 2013

Microelectromechanical system switches are becoming more and more popular in the electronics industry; there is a need for careful selection of the materials in the design and fabrication of switches for reliability and performance issues. The membrane used for actuation to change the state of an RF switch is made mostly using gold or aluminum. Various designs of membranes have been proposed. Due to the flexure-type structures, the design complexity increases, which makes stress analysis mandatory to validate the reliability and performance of a switch. In this paper, the effective stress and actuation voltage required for different types of fixed-fixed membranes is analyzed using finite element modeling. Effective measures are presented to reduce the stress and voltage.

• ETRI Journal
• /
• 제41권4호
• /
• pp.536-548
• /
• 2019

In this study, an electronically steerable parasitic array radiator (ESPAR) antenna via analog radio frequency (RF) switches for a single RF chain MIMO system is presented. The proposed antenna elements are spaced at ${\lambda}/64$, and the antenna size is miniaturized via a dielectric radome. The optimum reactance load value is calculated via the beamforming load search algorithm. A switch simplifies the design and implementation of the reactance loads and does not require additional complex antenna matching circuits. The measured impedance bandwidth of the proposed ESPAR antenna is 1,500 MHz (1.75 GHz-3.25 GHz). The proposed antenna exhibits a beam pattern that is reconfigurable at 2.48 GHz due to changes in the reactance value, and the measured peak antenna gain is 4.8 dBi. The reception performance is measured by using a $4{\times}4$ BPSK signal. The measured average SNR is 17 dB when using the proposed ESPAR antenna as a transmitter, and the average SNR is 16.7 dB when using a four-conventional monopole antenna.