• 제목/요약/키워드: RF design

검색결과 1,439건 처리시간 0.032초

RF IC 설계를 위한 새로운 CMOS RF 모델 (A New CMOS RF Model for RF IC Design)

  • 박광민
    • 대한전자공학회논문지SD
    • /
    • 제40권8호
    • /
    • pp.555-559
    • /
    • 2003
  • 본 논문에서는 CMOS 소자의 RF 동작을 정확히 예측하기 위해 Si 표면에서의 메탈 라인 사이의 커패시턴스 효과와 표피효과 및 근접효과를 포함한 RF IC 설계를 위한 새로운 CMOS RF 모델을 처음으로 제시하였다. Si 표면에서의 메탈 라인 사이의 커패시턴스는 레이아웃에 기초하여 모델링하였으며, 표피효과는 메탈 라인의 등가회로에 병렬회로를 부가하여 사다리꼴 등가회로로 구현하였다. 근접효과는 사다리꼴 등가회로에서 교차 결합된 인덕턴스 사이의 상호 인덕턴스를 부가함으로써 모델링하였다. 제안된 RF 모델은 BSIM 3v3에 비해 측정 데이터와 잘 일치하였으며, GHz 영역에서 소자 동작의 주파수 종속성을 잘 보여주었다.

센서노드용 RF 송수신기의 설계 파라미터 (Design Parameters of a RF Transceiver for Sensor Nodes)

  • 강상기;최홍택
    • 한국정보통신학회논문지
    • /
    • 제13권5호
    • /
    • pp.854-859
    • /
    • 2009
  • USN(Ubiquitous Sensor Network)을 이용한 많은 시범사업들이 진행되었으며, 최근에는 환경감시 분야에서 활용이 많은 관심을 받고 있다. USN의 센서노드로부터 정보를 획득하기 위해서는 RF 송수신기가 반드시 필요하다. 본 논문은 IEEE 802.15.4의 규격을 만족하면서 2.4GHz 대역에서 동작하는 센서노드용 RF 송수신기의 설계에 대해서 기술한다. 본 논문에는 구현하려는 송수신기의 구조와 IEEE 802.15.4의 요구 규격이 기술되어 있으며, 이 규격으로부터 도출된 RF 송수신기의 설계 파라미터로써 수신기의 잡음지수, 필터의 선택도, 주파수합성기의 위상잡음, 송신기의 선형성과 스펙트럼 마스크가 기술되어 있다.

A Novel Design of an RF-DC Converter for a Low-Input Power Receiver

  • Au, Ngoc-Duc;Seo, Chulhun
    • Journal of electromagnetic engineering and science
    • /
    • 제17권4호
    • /
    • pp.191-196
    • /
    • 2017
  • Microwave wireless power transmission (MWPT) is a promising technique for low and medium power applications such as wireless charging for sensor network or for biomedical chips in case with long ranges or in dispersive media such. A key factor of the MWPT technique is its efficiency, which includes the wireless power transmission efficiency and the radio frequency (RF) to direct current (DC) voltage efficiency of RF-DC converter (which transforms RF energy to DC supply voltage). The main problem in designing an RF-DC converter is the nonlinear characteristic of Schottky diodes; this characteristic causes low efficiency, higher harmonics frequency and a change in the input impedance value when the RF input power changes. In this paper, rather than using harmonic termination techniques of class E or class F power amplifiers, which are usually used to improve the efficiency of RF-DC converters, we propose a new method called "optimal input impedance" to enhance the performance of our design. The results of simulations and measurements are presented in this paper along with a discussion of our design concerning its practical applications.

심재성 암치료를 위한 RF hyperthermia system의 설계 및 제작 (Design and implementation of RF hyperthermia system for deep-seated cancer therapy.)

  • 유재형;박민용
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1985년도 춘계학술대회
    • /
    • pp.9-12
    • /
    • 1985
  • This paper covers the design and implementation process of RF hypertermia system for cancer therapy. Among many hyperthermic methods, RF capacitive heating method is discussed because it can heat the deep-seated tumors selectively. The RF power oscillator and its applicators were designed and implemented. And the experiments were performed with agar phantom and dog to prove that the system can heat any depth selectively. And the electrical safety and appropriateness of clinical application was proved through the human living-body test.

  • PDF

ESD Protection Circuits with Low-Voltage Triggered SCR for RF Applications

  • 김산홍;박재영;김택수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.24-25
    • /
    • 2008
  • An Electrostatic discharge (ESD) protection has been a very important reliability issue in microelectronics, especially for RF (Radio Frequency) integrated circuits (ICs). This paper reviews design and analysis of on-chip ESD (electrostatic discharge) protection circuits for RF applications. Key issues in RF ESD protection, design methods, and RF ESD protection solutions are discussed.

  • PDF

PCS 단말기의 수신단 고주파부 설계 및 구현 (Design & Implementation of Receiver RF Block for PCS Mobile Station)

  • 안상면;양운근
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
    • /
    • pp.65-68
    • /
    • 2000
  • In this paper, design parameters are investigated and design procedure is established for PCS mobile station, especially for receiver RF block. And simulation environment to analyze parameters of the receiver RF block to determine whether it satisfies the receiver standard, IS-98C, is calculated. Design parameters are simulated and optimized. With simulated results, PCS mobile station is implemented and tested. Measured results show good agreement with simulation Design procedure can be used to get optimum characteristics for each of receiver block. By using optimum characteristics, mobile station can be designed more efficiently.

  • PDF

항공기 RF 장비들의 신호 간섭 방지를 위한 필터 설계 (Filter design for protecting signal interference between RF equipments on aircraft)

  • 김준형;김봉규;전용구;이성우
    • 한국항공우주학회지
    • /
    • 제41권3호
    • /
    • pp.246-252
    • /
    • 2013
  • 본 논문에서는 항공기에 장착되는 RF(Radio Frequency) 장비간의 신호 간섭을 방지하기 위한 방안으로 가해 장비의 RF 단에 필터를 사용하여 간섭 성분을 억제하는 방안을 제안한다. 특히 가해 장비에서 발생하는 고조파 성분의 억제를 위한 필터 설계와 필터 성능을 검증하기 위한 시험 방안을 제시한다. 필터는 U/VHF(Ultra/Very High Filter) 무전기와 데이터링크 시스템간의 간섭을 방지하기 위해 U/VHF 무전기의 RF 단에 설치하였다. 본 논문에서의 필터 설계와 시험 방안은 항공기에서 발생하는 간섭 문제에 대한 대책을 수립할 수 있는 도구로써 항공기 RF 장비 설계에 도움을 줄 것이다.

SAR 위성의 고주파 호환성 설계 및 검증 (RF Compatibility Design & Verification for the SAR Satellite)

  • 원영진;박홍원;문홍열;우성현;김진희
    • 항공우주기술
    • /
    • 제10권2호
    • /
    • pp.37-48
    • /
    • 2011
  • 영상 레이더(SAR)는 날씨나 밤낮에 관계없이 전천후로 고해상도의 지구 관측을 가능하게 하는 강력하고 잘 정립된 마이크로웨이브 원격 탐사 기술이다. 한국항공우주연구원에서는 올해 발사될 예정인 우리나라 최초의 영상 레이더 위성을 개발해오고 있다. 영상 레이더 위성은 크게 위성 본체와 SAR 탑재체로 이루어진다. SAR 탑재체는 고출력의 전력을 SAR 안테나를 통하여 방사하기 때문에 설계 단계에서의 고주파 호환성 있는 설계와 시험단계에서의 고주파 호환성 검증이 실제 궤도 상에서 성능 보장을 위해서 무엇보다 중요한 절차이다. 본 연구에서는 영상 레이더 위성의 고주파 호환성을 위한 설계 기준과 검증 절차에 대하여 기술한다. 부가적으로 본 논문은 영상 레이더 위성의 RF 성능의 강건성 검증을 위한 RF 전체 방사 시험(RF 자체 호환성 시험)과 시험 형상 그리고 시험 결과에 대하여 기술한다.

밀리미터파 응용 시스템 설계를 위한 RF 소신호 주파수 특성 시뮬레이션 (RF Small-Signal Frequency Simulations for the Design of Millimeter-wave Application Systems)

  • 손명식
    • 융합신호처리학회논문지
    • /
    • 제12권3호
    • /
    • pp.217-221
    • /
    • 2011
  • GaAs 나 InP 기반의 HEMT(High Electron Mobility Transistor)들은 우수한 마이크로파 및 밀리미터파 주파수 특성 및 이에 따른 우수한 저잡음 특성을 가지고 있다. GaAs 기반 MHEMT(Metamorphic HEMT)는 InP 기반의 HEMT에 비해 비용 측면에서 커다란 장점을 가지고 있다. 본 논문에서는 마이크로파 및 밀리미터파 응용 시스템에 필수적인 MHEMT의 RF 특성을 예측 평가하기 위하여 MHEMT의 RF 소신호 특성 회로를 시뮬레이션하고 분석하였다. 본 논문에서의 시뮬레이션을 통한 RF 소신호 주파수 분석은 MHEMT를 이용한 밀리미터파 응용 시스템 설계에 도움을 제공할 수 있을 것으로 기대된다.

저위상 변화 감쇄기를 이용한 RF 자동 이득 조정 증폭기 설계 (The Design of a RF Automatic Gain Control Amplifier with Low Phase Shift Attenuator)

  • 박웅희;장익수;허준원;강인호
    • 전자공학회논문지D
    • /
    • 제36D권1호
    • /
    • pp.15-21
    • /
    • 1999
  • 저위상 변화 감쇄기를 이용한 RF 자동 이등 조정 증폭기 설계 방법을 제시하였다. RF 자동 이등 조정 증폭기를 사용함으로써, 증폭기의 출력 레벨을 일정하게 유지할 수 있으며 그 오차는 0.1dB 이하로 하였다. 이러한 장점 외에도, 임의의 RF 입력전력에 대하여 증폭기의 이득을 고정할 수도 있다. 만약 일정한 이득이 얻어진다면 원하는 혼변조 왜곡(IMD: Inter-modulation Distortion)을 얻는데 좀 더 신뢰성 있는 증폭기를 만들 수 있다.

  • PDF