• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.323-326
• /
• 2003

본 논문은 무선 음성/영상 송수신용 RF모듈 설계 및 제작하였다. RF 주파수는 정보통신부에서 고시한 영상전송용 2410, 2430, 3450, 2470MHz 사용하였으며 IF 주파수는 479.5MHz를 사용하였다. 설계 및 제작된 RF 모듈은 FR-4 재질인 유전체 4.6, 두게 0.8mm, 양면구조의 기판을 사용하여 50mm x 40mm 크기로 제작되었다. 설계된 송신기 모듈은 ＋5V 단일전원으로 9±1dBm의 출력과 주파수허용편차 50×10/sup -6/이하, 스퓨리어스 발사강도 기본주파수의 평균전력보다 40dB이하의 성능을 만족하였다. 수신기 모듈은 +5V 단일 전원으로 -80dBm이하의 수신감도로 만족할만한 성능을 보였다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.19-39
• /
• 2003

Embedded Laminate Embedded RF Functional Blocks.Base Library of Laminate Embedded Filters and Baluns developed for 2.4GHz Applications -S-Parameters are provided at connection points -Utilizes a low cost 2 core construction.Statistical Variation Study in Report Phase.Measurements over variants show solid performance.Filters and Baluns are available for customer use.Laminate Embedded RF Functions - Various Filters, BALUNs, couplers, etc. for Bluetooth, 802.11, and Cellular.LTCC Embedded RF Functions - Various Filters, BALLNs, Diplexers, Antenna Switches, couplers, etc. for Bluetooth, 802.11, and Cellular.Eulbedded Passives - Various Inductor topologies Performance different than ideal or discrete inductor Must look at inductor performance in overall RF function - Working on embedded ceramic capacitors in laminate . Embedded Shields - Program in place to identify and define key design rules

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1263-1265
• /
• 2004

RF-ID system is one of the very interesting field not only in a technical and economical point of view but also that people are still trying to realize lossless power transmission. This paper has a purpose on the efficient power transmission at the passive type IDcard by using wireless power transmission system. The most difficult but important part of the passive type RF-ID system is building the system that supplies power from Reader-antenna to IDcard-antenna. To check what is the most efficient way to deliver power depending on what kind of specifications of the power-amp in reader, antenna and antenna in IDcard is for operating IDcard circuit efficiently receiving the power from reader-antenna. For this, we used 125kHz sinewave for RF signal as a basic specification, OP-amp for amplifying signal and power-amp for amplifying power, loop type antenna.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.320-327
• /
• 2010

In this paper, electrostatically actuated direct contact type RF MEMS switches have been designed and demonstrated. As driving structures of the switch, cantilever, bridge, and torsion spring beam structures are used and the actuation voltage characteristics of the switches have been compared and discussed. The designed RF switches are fabricated with the surface micromachining technology using the electroplated gold and nickel structures. The characteristics of the fabricated switches are measured and analyzed. The switch, which is fabricated using the 510 ${\mu}m$-length bridge structure with the thickness of 1.5 ${\mu}m$, is actuated with 15 V driving voltage. The insertion losses are less than 0.2 dB over the measured frequency ranges from 0 to 20 GHz and the isolations are more than 30 dB.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.131-136
• /
• 2008

System을 통해 출력되는 신호를 측정할 때 정확한 측정을 방해하는 요소로 잡음이 있다. 이런 신호 측정의 방해 요소인 잡음을 제거 하는 방법 중의 하나로 Lock-in Amp(LIA)가 사용되고 있다. 본 논문에서는 잡음 신호의 제거를 위해 사용 하는 LIA를 제작 하고 특성을 파악 하였으며 RF통신을 이용하여 무선 형태로 제작 하였다. 현재 상용화된 LIA는 프로브를 통한 유선으로 측정신호의 입력을 받게 되지만 본 논문에서 제작된 LIA는 무선신호 형태로 입력 하게 된다. RF통신의 케리어 주파수는 447.9[MHz]로 Digital GMSK 변복조방식을 이용하였다. LIA의 제작은 Dual Phase Sensitive Detecter을 사용하였으며, 주요 구성 요소인 Phase Locked Loop, Phase Shifter, Phase Sensitive Detector, Low Pass Filter등의 구조와 특성을 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.422-423
• /
• 2005

RF Micro switches is a miniature device or an array of integration devices and mechanical components and fabricated with Ie batch-processing techniques. RF Micro switches application area are in phased arrays and reconfigurable apertures for defence and telecommunication systems, switching network for satellite communication, and single-pole double throw switches for wireless application. Recently, RF Micro switches have been developed for the application to the milimeter wave system. RF Micro switches offer a substantilly higher performance than PIN diode or FET switches. In this paper, SPDT(single-pole-double-throw) switch are designed to use 10 GHz. Actuation voltage and displacement are simulated by tool.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.85-88
• /
• 2017

In this paper, we have designed and fabricated a RF-DC voltage multiplier for 5.8GHz microwave wireless power transmission. In order to obtain higher voltage, the RF-DC voltage multiplier with 10 diodes (D-10) and the receiver module with an antenna and BPF (Band Pass Filter) was manufactured. The measured and compared results show that the voltages of the proposed one are lower than those of the previous tripler module up to 40cm. However, the voltage of the proposed one with the voltage multiplier is higher than that of the tripler module at the distances of 45cm and 50cm due to the voltage multiplier with 10 diodes.

• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.254-259
• /
• 2020

Phased-array antennas comprise a demanding antenna design methodology for commercial wireless communication systems or military radar systems. In addition to these two important applications, the phased-array antennas can be used in beamforming for wireless charging. In this study, a four-way analog beamforming front-end module (FEM) for a hybrid beamforming system is developed for 2.4 GHz operation. In a hybrid beamforming scheme, an analog beamforming FEM in which the phase and amplitude of RF signal can be adjusted between the RF chain and phased-array antenna is required. With the beamforming and beam steering capability of the phased-array antennas, wireless RF power can be transmitted with high directivity to a designated receiver for wireless charging. The four-way analog beamforming FEM has a 32 dB gain dynamic range and a phase shifting range greater than 360°. The maximum output RF power of the four-way analog beamforming FEM is 40 dBm (=10 W) when combined the four individual RF paths are combined.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.205-208
• /
• 2002

This paper presents a quantitative analysis on the intermodulation product between transmitter W-CDMA leakage signal and receiver out of band blocker, and proposes design guide lines for overcoming the effect in receiver design. Our analysis shows that duplexer isolation, attenuation and LNA IIP3 are mainly responsible for the 3rd order intermodulation product. Analysis also shows that LNA IIP3 required for meeting 3GPP TS 34.121 specification is about 1 ㏈m with duplexer isolation of 50 ㏈ and duplexer attenuation of 24㏈.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.413-416
• /
• 2001

In high frequency range, RF circuit design without considering shielding effect can cause several significant changes due to increase in parasitic capacitance and inductance between RF signal lines and shielding box. In this paper, bandpass filter has been made to measure the shielding effect and its s-parameter has been measured by Vector Network Analyzer (VNA). Equivalent circuit model including the shielding effect has been constructed with the lumped elements extracted from the 3D electromagnetic simulator, Maxwell SI. Then, the validity of the model is verified using microwave circuit simulator, ADS (Advanced Design System).