• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1920-1923
• /
• 1991

An online RF power measurement is needed for the full-bridged MOS-FET RF power inverter because the output current and/or voltage waveform is other than sinusoidal. In order to satisfy the requirement, the online measurement of the output power of this type of RF power inverter by the use of the PC-98 personal computer has been presented. The current and voltage waveforms are sensed by the digital oscilloscope probes so as to obtain the instantaeous power and they are entered into the PC98 personal computer so as to average the instantaneous powers. The RF power of up to 1 kw at 1 MHz measured for the power inverter at the output transformer. This method was confirmed to be applied to evaluate the load resistance change with temperature.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.192-195
• /
• 2007

본 논문에서는 RF 모듈을 탐재한 Atmega 시스템 설계를 통한 잠수함 원격 제어 시스템을 구현한다. 본 연구에서 제작한 RC 잠수함은 실제 잠수함의 원리와 비슷하게 잠항을 할 때는 소형펌프로 밸러스트탱크에 물을 채우고, 잠수를 할 때 수직타와 추진력을 이용하여 잠항을 한다. 이와 반대로 부상은 소형펌프로 밸러스트탱크 안에 물을 배수하여 WTC(방수실린더)안의 기압과 수직타와 추진력을 이용하여 부상을 한다. RC 잠수함은 크게 외부와 내부 그리고 방수를 하기 위한 WTC(방수 실린더)로 나누어진다. 송신 부는 RF 모듈, MCU(Atmega128), 키패드, 캐릭터LCD로 구성되며 수신부는 MCU(Atmega128), RF 모듈, 제어장치들로 구성한다. 제어장치에는 모형 잠수함은 추진력을 위하여 DC 모터에 스크류(프로펠러)를 장착하고, 방향전환 및 잠항과 부상을 위하여 RC 서보 모터를 사용하고 잠항과 부상을 위하여 펌프를 사용한다. WTC는 방수실린더로서 아크릴파이프를 이용하여 제작하고 방수를 위하여 아크릴파이프를 이용 여기에 MCU와 제어 장치들을 넣어 밀봉시켜 방수를 하여 완성한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.72-77
• /
• 2004

The purpose of this study is to develop temperature measurement system with Rf sensors on shoes dry process. The experimental results showed that the developed system successfully could be applied on real dry process to reduce defective shoes caused from insufficient dry with scientific data management.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.491-497
• /
• 2015

In this paper a method of design and Implementation of RFID based control system for reducing standby power consumption at the power outlet is described. The system is composed of a RF controlled power outlet having relay and an active RFID tag communicating with the RF reader module controlling the relay. When the tag carried by human approaches to the RF reader the reader recognizes the tag and switch off the relay based on the RSSI level measurement. A low power packet prediction algorithm has been used to decrease the DC power consumption at both the tag and the RF reader. The result of experiment shows that successful operation of the relay control has been obtained while low power operation of the tag and the reader is achieved using above algorithm. Also setting the distance between the reader and the tag by controlling transmission power of the tag and adjusting the duty cycle of the packet waiting time when the reader is in idle state allows us to reduce DC power consumption at both the reader and the tag.

• PNF and Movement
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2014

Purpose: To investigate the effect of action observation training on the muscle onset time and symmetrical use of rectus femoris(RF) and gastrocnemius medialis(GCM) during sit-to-stand (STS). Methods: Sixteen patients with stroke entered a single-blind trial and were randomly assigned to the experimental(Action) or control(Landscape) groups. Those in the Action observation group watched video clips showing specific movement and strategies to STS, wheas those in the control group watched video clips of static pictures showing differnet landscapes. All patients was measured the EMG data in the STS on the affected side and unaffected side. The EMG data were collected from RF and GCM while performing the STS task. The EMG onset time and onset time ratio for the RF and GCM were calculated by dividing the EMG onset time of RF and GCM action on the affected side by these on the unaffected side. Results: Onset time of affected side RF, GCM was significantly faster action observation training group than control group(p<.05). But interventions before and after the symmetry did not show a significant increase. Conclusion: There findings suggest that action observation training has a positive effect on the muscle onset time shortened during STS tasks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.978-984
• /
• 2015

In this paper, we designed a RF transceiver operating up to 200 km operating range and 45 Mbps data rate. The RF transceiver operates in Ku band and composed of up/down converter, high power amplifier, front-end elements. To satisfy the operating range of RF transceiver, 10W power amplifier was required and realized by using GaN power amplifier. Moreover, to mitigate mutual interference for different bandwidth signals due to the adaptive transmission speed control function, SAW filter bank structure was used. To verify system requirement satisfaction AWR simulation tool was used.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.83-87
• /
• 2004

Phase noise performance and current consumption of Radio Frequency (RF) Voltage-Controlled Oscillator (VCO) are largely dependent on the Quality (Q) factor of inductor-capacitor (LC) tank. Because the Q-factor of LC tank is determined by on-chip spiral inductor, we designed, analyzed, and modeled on-chip differential inductor to enhance differential Q-factor, reduce current consumption and save silicon area. The simulated inductance is 3.3 nH and Q-factor is 15 at 2 GHz. Self-resonance frequency is as high as 13 GHz. To verify its use to RF applications, we designed 2 GHz differential LC VCO. The measurement result of phase noise is -112 dBc/Hz at an offset frequency of 100 kHz from a 2GHz carrier frequency. Tuning range is about 500 MHz (25%), and current consumption varies from 5mA to 8.4 mA using bias control technique. Implemented in $0.35-{\mu}m$ SiGe BiCMOS technology, the VCO occupies $400\;um{\times}800\;um$ of silicon area.

• ETRI Journal
• /
• v.46 no.4
• /
• pp.708-715
• /
• 2024

We propose a 10-GHz 2 × 2 phased-array radio frequency (RF) receiver with an 8-bit linear phase and 15-dB gain control range using 65-nm complementary metal-oxide-semiconductor technology. An 8 × 8 phased-array receiver module is implemented using 16 2 × 2 RF phased-array integrated circuits. The receiver chip has four single-to-differential low-noise amplifier and gain-controlled phase-shifter (GCPS) channels, four channel combiners, and a 50-Ω driver. Using a novel complementary bias technique in a phase-shifting core circuit and an equivalent resistance-controlled resistor-inductor-capacitor load, the GCPS based on vector-sum structure increases the phase resolution with weighting-factor controllability, enabling the vector-sum phase-shifting circuit to require a low current and small area due to its small 1.2-V supply. The 2 × 2 phased-array RF receiver chip has a power gain of 21 dB per channel and a 5.7-dB maximum single-channel noise-figure gain. The chip shows 8-bit phase states with a 2.39° root mean-square (RMS) phase error and a 0.4-dB RMS gain error with a 15-dB gain control range for a 2.5° RMS phase error over the 10 to10.5-GHz band.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.121-129
• /
• 2012

RF biased inductively coupled plasma (ICP) is widely used in semiconductor and display etch processes which are based on vacuum science. Up to now, researches on how rf-bias power affects have been focused on the controls of dc self-bias voltages. But, effect of RF bias on plasma parameters which give a crucial role in the processing result and device performance has been little studied. In this work, we studied the correlation between the RF bias and plasma parameters and the recent published results were included in this paper. Plasma density was changed with the RF bias power and this variation can be explained by simple global model. As the RF bias was applied to the ICP, increase in the electron temperature from the electron energy distribution was measured indicating electron heating. Plasma density uniformity was enhanced with the RF bias power. This study can be helpful for the control of the optimum discharge condition, as well as the basic understanding for correlation between the RF bias and plasma parameters.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.186-195
• /
• 1999

In this paper, the RF-modules composed of front-end, frequency synthesizer, modulator/demodulator and power control multi channel WLL personal system for W-CDMA using 10 [MHz] RF channel bandwidth has been implemented and considered. The measured transmission power is 250 [mW] which is very close to the required value. The measured flatness of power at the final output stage is ${\pm}1.5[dB]$ over the required bandwidth of the receiver. In addition, it is found that the chip rate transmitting spread signal is set to 8.192 [MHz], the required rate. The frequencies of RF_LO signal and LO signal of the modulator and the demodulator measured by a frequency synthesizer are satisfied with design requirements. The operating range of the receiving strength signal indicator and AGC units shows 60 [dB] respectively. Also the measured phasor diagram and eye pattern for deciding the RF modules compatible with baseband digital signal processing part are shown good results.