• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.964-973
• /
• 2008

In this study, a short-wavelength coplanar-type transmission line employing periodic ground structure (PGS) was developed for application to miniaturized on-chip passive component on Si Radio Frequency Integrated Circuit (RFIC). The transmission line employing PGS showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PGS structure was 57 % of the conventional coplanar-type transmission line on Si substrate. Using the theoretical analysis. basic characteristics of the transmission line employing PGS (e.g., bandwidth. loss, impedance, and resonance characteristics) were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components on silicon RFIC. According to the results. the bandwidth of the transmission line employing PGS was more than 895 GHz as long as T is less than 20${\mu}m$, and the resonance characteristic was observed in 1239 GHz, which indicates that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.2
• /
• pp.98-101
• /
• 2007

A fully integrated 5-GHz CMOS power amplifier for IEEE 802.11a WLAN applications is implemented using $0.18-{\mu}m$ CMOS technology. An on-chip transmission-line transformer is used for output matching network and voltage combining. Input balun, inter-stage matching components, output transmission line transformer and RF chokes are fully integrated in the designed amplifier so that no external components are required. The power amplifier occupies a total area of $1.7mm{\times}1.2mm$. At a 3.3-V supply voltage, the amplifier exhibits a 22.6-dBm output 1-dB compression point, 23.8-dBm saturated output power, 25-dB power gain. The measured power added efficiency (PAE) is 20.1 % at max. peak, 18.8% at P1dB. When 54 Mbps/64 QAM OFDM signal is applied, the PA delivers 12dBm of average power at the EVM of -25dB.

• Mass Spectrometry Letters
• /
• v.9 no.2
• /
• pp.41-45
• /
• 2018

Ginseng (Panax ginseng Meyer) has been used as traditional herbal drug in Asian countries. Ginsenosides are major components having pharmacological and biological efficacy like anti-inflammatory, anti-diabetic and anti-tumor effects. To control the quality of the components in diverse ginseng products, we developed a new quantitative method using LC-MS/MS for 13 ginsenosides; Rb1, Rb2, Rc, Rd, Re, Rf, 20(S)-Rh1, 20(S)-Rh2, Rg1, 20(S)-Rg3, F1, F2, and compound K. This method was successfully validated for linearity, precision, and accuracy. This quantification method applied in four representative ginseng products; fresh ginseng powder, white ginseng powder, red ginseng extract powder, and red ginseng extract. Here the amounts of the 13 ginsenosides in the various type of ginseng samples could be analyzed simultaneously and expected to be suitable for quality control of ginseng products.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.91-95
• /
• 2007

In this paper, a new linearization method has been proposed for a CMOS low noise amplifier(LNA) using the Post IM3 Compensator. The fundamental operating theory of the proposed method is to cancel the IM3 components of the LNA output signal by generating another IM3 components, which are out-phase with respect to that of the LNA, from the Post IM3 Compensator. A single stage common-source LNA has been designed to verify the linearity improvement of the proposed method through $0.13{\mu}m$ RF CMOS process for WiBro system. The designed LNA achieves +7.8 dBm of input-referred 3^{rd}$-order intercept point (IIP3) with 13.2 dB of Power Gain, 1.3 dB of noise figure and 5.7mA @1.5V power consumption. IIP3 is compared with a conventional single stage common-source LNA, and it shows IIP3 is increased by +12.5 dB without degrading other features such as gain and noise figure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.232-238
• /
• 2008

In this paper, a wideband power efficient 2.2 GHz - 4.9 GHz Medium Power Amplifier (MPA), has been designed and fabricated using $0.8{\mu}m$ SiGe BiCMOS process technology. Passive elements such as parallel-branch spiral inductor, metal-insulator-metal (MIM) capacitor and three types of resistors are all integrated in this process. This MPA is a two stage amplifier with all matching components and bias circuits integrated on-chip. A P1dB of 17.7 dBm has been measured with a power gain of 8.7 dB at 3.4 GHz with a total current consumption of 30 mA from a 3 V supply voltage at $25^{\circ}C$. The measured 3 dB bandwidth is 2.7 GHz and the maximum Power Added Efficiency (PAE) is 41 %, which are very good results for a fully integrated Medium PA. The fabricated circuit occupies a die area of $1.7mm{\times}0.8mm$.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.159-163
• /
• 2002

So far, many kinds of researches on the chip components and MCM-C RF module especially on the 3-dimensional ceramic module using embedded passives have been performed. LTCC system has many kinds of advantages, like low loss, low cost of process, stability of process etc..The electrical behaviors of components are affected by that of the material systems including dielectrics and conductors. In this study, many kinds of conductor pastes in the variation with metal content and grain size are fabricated and their effect on the characteristics of stripline resonator are examined upto 6 ㎓.

• Journal of Nutrition and Health
• /
• v.53 no.2
• /
• pp.121-128
• /
• 2020

Purpose: The Rubus coreanus fruit (RF) is an important traditional medicinal herb having antioxidant, anti-inflammatory, and immunoregulatory properties. These activities are known to change dramatically, depending on maturity of the RF. It is presumed that change of functional components, such as flavonoids, tannins, phenolic acids, triterpenoids and organic acids in RF, affect the various bioactivities. This study aimed to confirm changes in the anti-melanogenic effects of RF based on maturity, and to identify the bioactive compounds responsible. Methods: The cell viability of mature RF (MRF) and immature RF (IRF) extracts was investigated using B16F10 cells. To compare the anti-melanogenic effect of MRF and IRF extracts, we first assessed the melanin content. High-performance liquid chromatography analysis was performed to evaluate changes in the level of ellagic acid according to maturity of the RF. In addition, tyrosinase inhibitory activity of both extracts was examined. Results: MRF and IRF extracts (50-200 ㎍/mL) do not affect the cell viability of B16F10 melanoma cells. IRF extract more effectively inhibited melanin synthesis than MRF extract. The content of ellagic acid in IRF extract was higher than that obtained in MRF extract. Furthermore, greater inhibition of tyrosinase activity was observed after exposure to IRF extract than MRF extract. A positive correlation was determined between ellagic acid content and tyrosinase inhibitory activity, and a negative correlation was obtained between ellagic acid content and melanin content. Taken together, our results indicate that ellagic acid is one of the major bioactive compounds of RF that imparts a whitening effect. Conclusion: Our results indicate that ellagic acid in MRF and IRF extracts affect the anti-melanogenesis effect through inhibition of tyrosinase activity. Therefore, the ellagic acid rich IRF has greater potential for application as a natural and functional cosmetic material.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.23-43
• /
• 2021

In this study, we selected two essential oils, Citrus unshiu and Cinnamomum cassia with superior antioxidant effects from the essential oils of 7 wild plants in South Korea and examined their antimicrobial activity against Candida albicans, which causes dermatitis to identify the antimicrobial components in the essential oils. As a result of measuring DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity, SC50 value of the Citrus unshiu essential oil was 0.010 mg/mL, while for the Cinnamomum cassia essential oil, SC50 value was 0.09 mg/mL. In addition, when ABTS (2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity was measured, SC50 value of the Citrus unshiu essential oil was 0.09 mg/mL, while for the Cinnamomum cassia essential oil, it was 0.06 mg/mL, exhibiting high antioxidant activity. For the minimum inhibitory concentration (MIC), the essential oil of Cinnamomum cassia was 1.25 mg/mL and that of Citrus unshiu was 5 mg/mL, demonstrating a high antimicrobial activity of the Cinnamomum cassia essential oil. Through the thin layer chromatography (TLC) bioassay, we assessed the antimicrobial activity against C. albicans according to the fraction components of the two essential oils. Also, by using preparative TLC (prep. TLC), we obtained the active fractions, and by performing GC/MS analysis of the components with the same Rf value, we identified the antimicrobial-active components. As a result, the main components having antioxidant and antimicrobial activities were cinnamyl acetate, eucalyptol, linalool, and citral of the Cinnamomum cassia essential oil and linalool from the Citrus unshiu essential oil. Also, based on the analysis of the fractional components that showed antioxidant and antimicrobial activities in both of the two essential oils, it was found that linalool has antioxidant activity, while cinnamyl acetate, eucalyptol, citral, and geranyl acetate have antioxidant and antimicrobial activities.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.62-62
• /
• 2008

As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.25-31
• /
• 2016

Parasitic capacitance and resistance of FinFET transistors are the important components that determine the frequency performance of the circuit. Therefore, the researchers in our group developed more accurate parasitic capacitance and resistance for FinFETs than BSIM-CMG. To verify the RF performance, proposed model was applied to design an LNA that has $S_{21}$ more than 10dB and center frequency more than 60GHz using HSPICE. To verify the accuracy of the proposed model, mixed-mode capability of 3D TCAD simulator Sentaurus was used. $S_{21}$ of LNA was chosen as a reference to estimate the error. $S_{21}$ of proposed model showed 87.5% accuracy compared to that of Sentaurus in 10GHz~100GHz frequency range. The $S_{21}$ accuracy of BSIM-CMG model was 56.5%, so by using the proposed model, the accuracy of the circuit simulator improved by 31%. This results validates the accuracy of the proposed model in RF domain and show that the accuracies of the parasitic capacitance and resistance are critical in accurately predicting the LNA performance.