• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.89-92
• /
• 2004

Nowadays, the study on the ceramic components and modules that used in telecommunication system is being performed. The technology that co-fired both a ceramic material and a silver conductor is usually used to develop small telecommunication components and modules. In the study, It is that the lumped elements equivalent circuit with easy tuning control can be matched more accurate at the 50ohm than the transmission line.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.6
• /
• pp.296-302
• /
• 2001

In this paper, the vector finite elements are adopted to calculate eigenvalues of RF and microwave components. Simulation results show that spurious are completely avoided because of the divergence free nature of the vector elements. This paper seeks to extend these low-order elements to higher orders to improve the accuracy of numerical solution. Investigation of numerical results for a rectangular waveguide was provided. A vector finite element program was implemented to allow propagation constants and electric field distributions to be directly computed in the rectangular and circular waveguides which are partially filled with the dielectric.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.5
• /
• pp.273-278
• /
• 2004

This paper analyzed the phase noise characteristics of frequency-shifting module by figuring out the relationship between the phase noise components of 1st and 2nd local oscillator composing the frequency-shifting module and those of RF output signals shifted in frequency. Also, frequency-shifting module with the improvement of the phase noise performance was designed and implemented by means that the phase noise components of 1st local oscillator were cancelled in the output signal. Output signal has been affected by only phase noise of 2nd local oscillator, which had excellent phase noise performance than that of the 1st local oscillator.

• Journal of Ginseng Research
• /
• v.20 no.2
• /
• pp.173-178
• /
• 1996

Aerobic cells are normally protected from the damage of free radicals by antioxidative on , zymes such as superoxide dismutase (SOD), catalase, glutathione (GSH) peroxidase, GSH S- transferase and GSH reductase which scavenge free radicals as well as nonenzymatic antioxidants such as ceruloplasmin, albumin and nonprotein-SH including GSH. The effects of each component (ginsenoside $Rb_1$, $Rb_2$, Rc, Rd, Re, $Rb_1$, Rf, $Rh_1$ and $Rh_2$) of red ginseng on the antioxidative enzyme activities were investigated in the liver in order to screen antioxidative components of red ginseng. Ginsenoside $Rb_1$ and Rc showed a tendency to increase GSH peroxidase activity, while ginsenoside Rc significantly decreased Cu,Zn-SOD activity. Especially, ginsenoside $Rh_2$ significantly increased catalase activity. These results suggest that ginsenoside $Rh_2$ is an important active component among total saponins of red ginseng.

• Korean Journal of Pharmacognosy
• /
• v.49 no.3
• /
• pp.270-277
• /
• 2018

Pyungwi-san has been used to treat the digestive system diseases, physconia, nausea, anorexia, and dyspepsia in Korea. In this study, an ultra-performance liquid chromatography-electrospray ionization-mass spectrometry (UPLC-ESI-MS/MS) method was optimized for simultaneous determination of the 14 marker components, spinosin, liquiritirn apioside, liquiritin, narirutin, 6'''-feruloylspinosin, hesperidin, liquiritigenin, glycyrrhizin, 6-gingerol, atractylenolide III, honokiol, atractylenolide II, magnolol, and atractylenolide I in Pyungwi-san extract. All analytes were separated on a Waters Acquity UPLC BEH $C_{18}$ analytical column ($2.1{\times}100mm$, $1.7{\mu}m$) with maintained at $45^{\circ}C$. The mobile phase consisted of 0.1% (v/v) aqueous formic acid and acetonitrile. The MS conditions were as follows: capillary voltage 3.3 kV, extractor voltage 3.0 V, RF lens voltage 0.3 V, source temperature $120^{\circ}C$, desolvation temperature $300^{\circ}C$, desolvation gas 600 L/h, cone gas 50 L/h and collision gas 0.14 mL/min. The coefficient of determination of 14 analytes was 0.9989-1.0000. The limits of detection and quantification values of the all analytes were 0.04-2.56 and 0.13-7.69 ng/mL, respectively. As a result of the analysis using the established LC-ESI-MS/MS method, the 5 components, spinosin, 6'''-feruloylspinosin, atractylenolide III, II, and I derived from Zizyphi Fructus and Atractylodis Rhizoma, were not detected in this extract. On the other hand, the 9 components except for the 5 components were 4.15-498.87 mg/kg in lyophilized Pyungwi-san extract. Among these components, glycyrrhizin, marker compound of Glycyrrhizae Radix et Rhizoma, was detected the most amount as a 498.87 mg/kg.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.12
• /
• pp.654-664
• /
• 2000

Thin films of ZnO are deposited by using an RF magnetron sputtering with varying the substrate temperature(RT~39$0^{\circ}C$) and RF power(50~250W). Cu-doped ZnO(denoted by ZnO:Cu) films have also been prepared by co-spputtering of a ZnO target on which some Cu-chips are attached. Different substrate materials, such as Si, $SiO_{2}/Si$, sapphire, DLC/Si, and poly-diamond/Si, are employed to compare the c-axial growth features of deposited ZnO films. Texture coefficient(TC) values for the (002)-preferential growth are estimated from the XRD spectra of deposited films. Optimal ranges of RF powers and substrate temperatures for obtaining high TC values are determined. Effects of Cu-doping conditions, such as relative Cu-chip sputtering areas, $O_{2}/(Ar+O_{2})$ mixing ratios, and reactor pressures, on TC values, electrical resistivities, and relative Cu-compositions of deposited ZnO:Cu films have been systematically investigated. XPS study shows that the relative densities of metallic $Cu(Cu^{0})$ atoms and $CuO(Cu^{2+})$-phases within deposited films may play an important role of determining their electrical resistivities. It should be noted from the experimental results that highly resistive(> $10^{10}{\Omega}cm$ ZnO films with high TC values(> 80%) can be achieved by Cu-doping. SAW devices with ZnO(or Zn):Cu)/IDT/$SiO_{2}$/Si configuration are also fabricated to estimate the effective electric-mechanical coupling coefficient($k_{eff}^{2}$) and the insertion loss. It is observed that the devices using the Cu-doped ZnO films have a higher $k_{eff}^{2}$ and a lower insertion loss, compared with those using the undoped films.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.2 s.43
• /
• pp.49-57
• /
• 2007

Au-Sn solder alloy were deposited in multilayer and co-sputtered film by rf-magnetron sputter and the composition control and analysis were studied. For the alloy deposition condition, each components of Au or Sn were deposited separately. On the basis of pure Sn and Au deposition, the deposition condition for Au-Sn solder alloy were set up. As variables, the substrate temperature, the rf-power, and the thickness ratio were used for the optimum composition. For multilayer solder alloy, the roughness and the composition of solder alloy were controlled more accurately at the higher substrate temperature. In contrast, for co-sputtered solder, the substrate temperature influenced little to the composition, but the composition could be controlled easily by rf-power. In addition, the co-sputtered solder film mostly consisted of intermetallic compound, which formed during deposition. The compound were confirmed by XRD. Without flux during bonding of solder alloy film on leadframe, the adhesion strength were measured. The maximum shear stress was $330(N/mm^2)$ for multilayer solder with Au 10wt% and $460(N/mm^2)$ for co-sputtered solder with Au 5wt%.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1156-1159
• /
• 2013

We investigate the characteristics of $Cu_2O$ thin films deposited through the addition of $N_2$ gas. The addition of $N_2$ gas has remarkable effects on the phase changes, resulting in improved electrical and optical properties. An intermediate phase ($6CuO{\cdot}Cu_2O$) appears at a $N_2$ flow rate of 1 sccm, and a $Cu_2O$ (200) phase is then preferentially grown at a higher feeding amount of $N_2$. The optical and electrical properties of $Cu_2O$ thin films are improved with a sufficient $N_2$ flow rate of more than 15 sccm, as confirmed through various analyses. Under this condition, a high bandgap energy of 2.58 eV and a conductivity of $1.5{\times}10^{-2}$ S/cm are obtained. These high-quality $Cu_2O$ thin films are expected to be applied to $Cu_2O$-based heterojunction solar cells and optical functional films.

• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.1-6
• /
• 1996

Effects of Panax ginseng on allergic reactions were studied uslng various in vivo and in vitro experimental models such as 48-hr passive cutaneous anaphylaxis, mediators-induced skin reactions, histamine release from rat peritoneal mast cells, hexosaminidase release from RBL-2H3 cells, and lipoxygenase assay . In all of anti-allergic experiments we conducted, ginseng components (50% ethanol extract or ginseng total saponin or ginsenosides) extracted from Korean red ginseng, did not show significant anti-allergic actions. In 48-hr passive cutaneous anaphylaxis and mediators-induced skin reactions, 50% ethanol extract did not suppress hypersensitivity reactions. Total saponin, 50% ethanol extract, and 8 major ginsenosides did not show inhibitory effects on lipoxygeanse activity. Ginseng total saponin did not inhibit histamine release from rat peritoneal mast cells. All of the ginseng components mentioned above were also tested on RBL-2H3 cells, but none of them inhibited hexosaminidase release from this cell line. These results suggest that Panax ginseng does not have effects on allergic reactions at the level of 50% ethanol extract or total saponin used. All of 8 major saponin components tested ($Rb_1$, $Rb_2$, Rc, Rd, Re, Rf, $Rg_1$, $Rg_2$), did not inhibit lipoxygenase activity and degranulation events.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1176-1183
• /
• 2003

In this paper, miniature voltage-controlled oscillator(VCO) for 1.6 ㎓ PCS band is designed and implemented using the LTCC technique. Circuit level design using commercial components is performed, and passive L, C elements embedded in LTCC substrate is optimized by simulation tools. Embedded passive components are modeled into equivalent circuits and their circuit parameters are extracted for circuit simulation. Utilizing the designed embedded passive elements and 21 layers LTCC substrate, VCO with 4.0${\times}$4.0${\times}$1.6 ㎣ dimensions is designed and fabricated. Developed VCO operates in 2.7 V with 8.5 ㎃ current consumption. The phase noise performance of VCO is below -112.61 ㏈c/㎐ at 100 ㎑ offset and harmonic suppression characteristics is measured above -30 ㏈.