• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.116-125
• /
• 2003

In this paper, we introduce a newly developed DSP module and Software which Is applicable to DTV-OCR and is designed to cancel the interference signal. In general, RF repeater has problems of system oscillation and signal Quality degradation due to feedback interference signal coming from transmit antenna. In this paper, we demonstrate newly developed DSP HW and SW module for cancelling the interference signal by investigating the field data measured through a RF repeater. Also, the structure and signal processing method for non-regenerative repeater system based on the newly developed DSP HW and SW module is illustrated as well.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.214-219
• /
• 1997

We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600-1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with aims to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial mode laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, whlch allows us to perform multiple measurements of up to 10 machine axes simultaneously.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.611-625
• /
• 2018

With innovative advances in wireless communication technology, many researches for extending network lifetime in maximum by using energy harvesting have been actively performed on the area of network resource optimization, QoS-guaranteed transmission, energy-intelligent routing and etc. As known well, it is very hard to guarantee end-to-end network delay due to uncertainty of the amount of harvested energy in multi-hop RF(radio frequency) energy harvesting wireless networks. To minimize end-to-end delay in multi-hop RF energy harvesting networks, this paper proposes an energy efficient routing metric based on interference aware and protocol which takes account of various delays caused by co-channel interference, energy harvesting time and queuing in a relay node. The proposed method maximizes end-to-end throughput by performing avoidance of packet congestion causing load unbalance, reduction of waiting time due to exhaustion of energy and restraint of delay time from co-channel interference. Finally simulation results using ns-3 simulator show that the proposed method outperforms existing methods in respect of throughput, end-to-end delay and energy consumption.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.945-948
• /
• 2016

Recent premium smartphones commonly employ a metal frame and this trend is currently spreading over mid-range smartphones. However, the metal frame becomes a good coupling path of electromagnetic noises emitted from digital components in smartphones and then increases radio-frequency interference(RFI) to RF antennas located at top and bottom sides of smartphones. This paper proposed a metal frame with EBG(Electromagnetic Band Gap) structure to reduce the noise coupling to antenna by suppressing surface wave on the metal frame. By simulation, it is confirmed that the proposed metal frame with $7{\times}6$ mushroom-type EBG array pattern with multi-via can reduce the noise coupling to RF antenna by about 20 dB.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.455-468
• /
• 2014

This paper presents seamless hand off implementation suggesting algorithm and Measuring /testing at the tunnel environment in order to derive the ideal value of wireless data transmission in RF-CBTC train control system modeled by Shinbundang Operation System. In addition, it proposes the ideal value(-57dB) for reducing the re-transmission or frequency interference rate and demonstrates frequency optimization which enables highly reliable data communication in Train control system using wireless communications. Based on these result, Shinbundang phase 2 plan to apply to this system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.8-19
• /
• 2006

The RF Module which can be adjusted for a digital terrestrial and multi standard(DVB-C, ISDB-T, DVB-H) reception is developed. The Module by single conversion does divide a broadband(45MHz~860MHz) broadcasting channels into three-bands(UHF, VHF_HIGH, VHF_LOW) to satisfy some electrical performances such as image signal rejection, phase noise, IF flatness etc and digital reception specifications such as analog and digital adjacent channel protection, co-channel protection which is important in environment with co-existence both analog and digital broadcasting systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.345-355
• /
• 2006

The RF Module which can be adjusted for a digital terrestrial and multi standard(DVB-C, ISDB-T, DVB-H) reception is developed. The Module by single conversion does divide a broadband($45MHz{\sim}860MHz$) broadcasting channels into three-bands(UHF, VHF_HIGH, VHF_LOW) to satisfy some electrical performances such as image signal rejection, phase noise, IF flatness etc and digital reception specifications such as analog and digital adjacent channel protection, co-channel protection which is important in environment with co-existence both analog and digital broadcasting systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1879-1888
• /
• 2015

This paper evaluates the adjacent channel coexistence issues between LAA(License Assisted Access) system and other system (e.g. Wi-Fi) system in 5 GHz unlicensed spectrum. LAA is a technology to achieve enhanced data rate by aggregating licensed and unlicensed spectrum using CA(Carrier Aggregation). The coexistence study is essential before deploying LTE in unlicensed spectrum to verify the impact of LTE on the existing system such as Wi-Fi including system in throughput and regulatory aspects. This paper evaluates and analyzes the RF requirements of LTE system using interference analysis of coexistence study when operating at adjacent frequency channel of the Wi-Fi system in order to minimize the impact of LTE system into Wi-Fi system.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.69-79
• /
• 2001

비동기 및 차세대 이동통신 시스템의 진화 과정 상에서 RF관련 규격들의 변화에 대해 알아보았고, 비동기 시스템의 RF부를 제작하는데 사용하게 될 RF 부품 기술 동향을 단말기와 기지국의 경우로 나 누어 분석하였다. 또한 차세대인 4세대 시스템 RF 부의 진화 전망에 대해 간단히 알아보았다. 시스템 이 진화할수록, 요구되는 데이터 처리 능력으로 인 해 채널 대역폭은 점점 넓어지고, 기존 시스템과의 상호 간섭 방지를 위해 일반적인 RF 관련 규격 중 방사 규격과 요구되는 선형성이 엄격해진다. 앞으로 의 RF 부품의 기술적 진화는 직접 변환 방식의 부 품 개발로 단말기의 소형화, 저가격화를 이를 것이 고, 동작 주파수 영역을 0.8~5 GHz대로 하기 위한 광대역화, 선형화가 요구될 것이다. 또한 4 세대 시스템에서는 기존의 주파수 이용 개념과 무선 전송 기술에 변화를 주게 될 SDR 기반의 다중모드/복합 다중 접속 기술을 적용하게 될 것으로 예상된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.461-462
• /
• 2016

IPS 측위는 GPS음영 지역인 실내의 특정 위치 정보를 판단하는 시스템으로 현재 위치에서 발생되는 신호 정보를 수집하는 시스템과 이 신호들로 구성된 실내 측위 지도, 측위 위치를 결정하기 위한 알고리즘 등에 따라 여러 종류로 나누어진다. 대표적인 IPS로 2.4Ghz, 5.0GHz 대역의 무선 신호(WiFi, BLE, Sensor Network, etc)를 활용하는 RF신호 기반 WPS 등이 있다. RF 신호를 기반으로 하는 실내 측위는 발생 기기의 고장, 장애물 발생, 채널 간섭 현상 등으로 인해 측위 시점 수집된 신호와 구축된 지도의 신호 정보가 달라 측위 정확도가 낮아지는 경우가 발생한다. 본 논문에서는 앞서 언급한 문제점을 해결하기 위해 기존 RF 환경을 사용하는 IPS 방안에 대하여 분석한다. 또한 RF 이외의 실내 측위 기술들에 대해서도 설명하고 측위 정확도를 위해 단일 측위 방식이 아닌 복합 측위 방식에 대한 설계를 제안한다.