• Journal of Korean Port Research
• /
• v.14 no.2
• /
• pp.133-142
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system. The result of the paper presents that if data transmission area such as 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.303-305
• /
• 2000

The effect of anisotropy field on the high frequency magnetic characteristics of FeTaN films was investigated. Those films show good magnetic properties : 4$\pi$Ms of 13KG, Hc of 0.6 Oe, effective permeability(${\mu}$') of 800 with a stable frequency response up to 800MHz. The films also show a large anisotropy field(Hk) over 21Oe. It result from the increased anisotropy of patterned FeTaN films. The combination of high saturation magnetization and relatively high Hk in these films is believed to the partly responsible for FeTaN for the excellent high-frequency behavior.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.359-362
• /
• 2000

The purpose of this study is to research and develop graphene composite for lithium polymer battery. VO(graphene) composite is one of the promising material as a electrode active material for lithium polymer battery(LPB). We investigated AC impedance response and charge/discharge cycling of VO(graphene)/SPE/Li cells. The first discharge capacity of VO(graphene) cathode with 50wt.% V$_2$O$\sub$5/ was 150mAh/g, while that of VO(graphene) cathode with 85wt.% V$_2$O$\sub$5/ was 248mAh/g. The Ah efficiency was above 98% after the 2nd cycle. The discharge capacity of VO(graphene) anode with 3wt.% V$_2$O$\sub$5/ was 718 and 266mAh/g at cycle 1 and 10 at room temperature, respectively. The VO(graphene) anode with 3wt.% V$_2$O$\sub$5/ in PVDF-PAN-PC-EC-LiC1O$_4$ electrolyte showed good capacity with cycling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.149-152
• /
• 2000

AC impedance measurements on poly-p-phenylenevinylene (PPV) LEDs in the frequency range between 10 Hz and 10$\^$6/ Hz were carried out. The complex-plane impedance spectra indicate that PPV devices can be represented by equivalent circuits that corresponds to the bulk and interfacial regions at high and low frequencies, respectively. As a result of complex impedance analysis through the separation of bulk and interfacial region impedances, increase of forward bias in Al/PPV/ITO devices gave rise to relative decrease of the interfacial region impedance. Above the electric field of 10$\^$6/ V/cm the PPV device showed a space charge limited current (SCLC) conduction. The dependence of the transport mechanism and dielectric properties on the applied bias voltage is discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.141-144
• /
• 2000

New photo-alignment materials based on PCEMA (Poly (4-methacryloyloxylchalcone)) for liquid crystal (LC) aligning were synthesized. And the electro-optical (EO) characteristics of the photo-aligned TN-LCD were investigated. The excellent LC alignment and voltage-transmittance (V-T) characteristics for the photo-aligned TN-LCD on PCEMA surface containing more cinnamoly group can be achieved. However, the reverse tilt disclinations for the photo-aligned TN-LCD on the PCEMA surface containing more OH group were observed. Consequently, we suggest that the LC aligning capabilities can be increased by increasing of cinnamoly group on the PCEMA surfaces.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.4
• /
• pp.246-255
• /
• 2000

This paper deals with a novel full digital control method of the three-phase PWM inverter for UPS. The voltage and current of output filter capacitor as state variables are the feedback control input. In addition, a double deadbeat control consisting of a d-q current minor loop and a d-q voltage major loop, both with precise decoupling, have been developed. The switching pulse width modulation based on SVM is adopted so that the capacitor current should be exactly equal to its reference current. In order to compensate the calculation time delay, the predictive control is achieved by the current·voltage observer. The load prediction is used to compensate the load disturbance by disturbance observer with deadbeat response. The experimental results show that the proposed system offers an output voltage with THD less than 2% at a full nonlinear load.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.3
• /
• pp.235-240
• /
• 2000

New photh-alignment materials based on PCEMA (poly(4-methacryloyloxylchalcone))for liquid crystal (LC) aligning were synthesized. and the electro(EO) characteristics of the photo-aligned TN-LCD were investigated. The excellent LC alignment and voltage-transmittance (V-T) characteristics for the photo-aligned TN-LCD on PCEMA surface containing more cinnamoly group can be achieved. However the reverse tilt disclinations for the photo-aligned TN-LCD on the PCEMA surface containing more OH group were observed. Consequently we suggest that the LC aligning capabilities can be increased by increasing of cinnamoly group on the PCEMA surfaces.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.909-922
• /
• 2000

High sped messaging layer for application's feeling of low level network performance is needed by Clustering System based on high speed network fabrics. It should have the mechanism to directly pass messages between network card and application space, and provide flexible affodabilities for many diverse applications. In this paper, CROWN (Clustering Resources On Workstations' Network) which is designed and implemented for multi-purpose clustering system will be introduced briefly, and CLCP(CROWN Lean Communication Primitives)which is the high speed messaging layer for CROWN will be followed. CLCP consists of a firmware for controlling Myrinet card, device drier, and user libraries. CLCP supports various application domains as a result of pooling and interrupt receive mechanism. In case of polling based receive, 8 bytes short message, and no other process, CLCP has 262 micro-second response time between two nodes, and IM bytes large message, it shows 442Mbps bandwidth.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.225-228
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So deciding binary strings of parents generation using by the fitness values of genetic algorithms, we perform selection, crossover and mutation to generate the descendant generation. The advantage of this method is better than the Ziegler-Nickels method in characteristic of output, and has extent of applying without limit of K, L, T parameters.

• Journal of Korean Port Research
• /
• v.14 no.2
• /
• pp.219-231
• /
• 2000

In this paper a complicated structural behavior in collision and its effects of energy translation to the collision bulkhead was examined through a methodology of the numerical simulation to obtain a ideal bow construction and a location of collision bulkhead against head on collision. In the present the bow structure is normally designed in consideration of its specific structural arrangements and internal and external loads in these area such as hydrostatic and dynamic pressure, wave impact and bottom slamming in accordance with the Classification rules, and the specific location of collision bulkhead by SOLAS requirement. By these studies the behavior of the bow collapse due to collision was synthetically evaluated for the different size of tankers and its operational speed limits, and by the results of these simulation it provides the optimal design concept for the bow construction to prevent the subsequent plastic deformation onto or near to the collision bulkhead boundary and to determine the rational location of collision bulkhead.