• 제목/요약/키워드: REED

검색결과 622건 처리시간 0.029초

Reed Canarygrass 초지의 관리 및 이용에 관한 연구 III. 수확시기가 주요 Reed Canarygrass 목초의 수량과 사료가치 및 잡초발생에 미치는 영향 (Studies on the Management and Utilization of Reed Canarygrass III. Effect of harvest time on the dry matter yeild, nutritive value, and weed development in four cultivars of reed canarygrass pasture)

  • 서성;이종경;신동은
    • 한국초지조사료학회지
    • /
    • 제15권2호
    • /
    • pp.112-117
    • /
    • 1995
  • A field experiment was canied out to determine the effects of harvest time (grazing, soiling and hay stage) on the grass growth, dry matter (DM) yield, nutritive value, and weed development in reed canarygrass (Phalaris arundinacea L.) pasture. The cultivars of reed canarygrass used in this study were Palaton, Venture, Castor, and Frontier (control). The grass was harvested 3 times at hay stage, 4 times at soiling stage, and 6 times at grazing stage in 1992. The average plant height was 31-41cm at grazing, 47-59cm at soiling, and 76-86cm at hay stage. Similar DM yield was observed in Palaton(12,567 kglha), Venture(l2,435kg), and Frontier(12,762kg), and the yields of 3 cultivars were significantly higher than that of Castor(ll,025kg) (P<0.05). Total yields affected by harvest time were lO,O6 1, 1 1,832, and 14,699 kg/ha at grazing, soiling, and hay stage, respectively(P<0.05). The content of crude protein (CP) was not significantly different among cultivars. CP contents by harvest time were 21.6% at grazing, 19.3% at soiling, and 18.8% at hay stage, regardless of cultivm(P<0.05). The contents of neutral detergent fiber (NDF) and acid detergent fiber (ADF) were similar among cultivars and harvest time. However, slightly higher NDF and ADF contents were found in Frontier. The contents of Ca, P, K, and Mg were not affected by cultivars and harvest time. The appearance of weeds was high in Castor, and low in Frontier. The weeds at grazing stage(33.3-60.0%) were remarkably higher than those at soiling and hay astage (ca 10%). In conclusion, it is suggested that 3-4 times (soiling and hay stage) of harvest was recommended for grass production, nutritive value, and weed control in reed canarygrass pasture, regradless of cultivars of Palation, Venture and Frontier, except Castor.

  • PDF

Reed-Solomon decoder를 위한 Two-way addressing 방식의 Euclid 계산용 회로설계 (Implementation of Euclidean Calculation Circuit with Two-Way Addressing Method for Reed-Solomon Decoder)

  • 유지호;이승준
    • 전자공학회논문지C
    • /
    • 제36C권6호
    • /
    • pp.37-43
    • /
    • 1999
  • 고성능 VLSI 설계를 위한 pipeline 형태의 Reed-Solomon을 구현하였다. Shortened RS code의 경우에 있어서 기존의 parallel recursive cell 방식이나[1] 다중 클락 설계와 같은 접근과는 달리 작은 면적에서 단일 클락으로 동작할 수 있는 이중 수소(two-way addressing) 방식의 Euclid 계산을 제안하였다. 이러한 방식은 recursive cell을 병렬 처리하는 Euclid 계산 방식에 비해 면적이나 소비 전력에 있어 장점을 갖고 있음을 synthesis와 전력 모의실험을 통해 검증하였다. 본 설계는 면적상으로 parallerl recursive cell을 이용한 단일 클락euclid 회로가 약 5,000 gate임에 비하여 40% 정도 감소한 3,000 gate 정도에 구현할 수 있었다. 또한 전력 소비면으로는 기존의 recursive cell을 이용한 다중 클락 euclid 회로가 6mW 이상의 전력을 소비하는 반면에 본 설계는 3mW대의 전력 소비를 보여 현격한 차이를 보였다.

  • PDF

2중 오류정정 Reed-Solomon 부호의 부호기 및 복호기 장치화에 관한 연구 (On the Implementation of CODEC for the Double-Error Correction Reed-Solomon Codes)

  • 이만영;김창규
    • 대한전자공학회논문지
    • /
    • 제26권2호
    • /
    • pp.10-17
    • /
    • 1989
  • Reed-Solomon(RS) 부호의 복호에서 오류위치다항식을 구하기 위한 알고리듬 중 Peterson에 의해 제안되고 Gorenstein과 Zierler가 개선한 알고리듬은 오류정정능력 t가 비교적 작을 경우 BerlekampMassey의 반복 알고리듬, Euclid 알고리듬을 이용한 복호, 변환영역에서의 복호보다 오류위치다항식의 계산이 간단하고 장치화에 이점이 있다. 본 논문에서는 Peterson-Gorenstein-Zieler의 알고리듬 RS부호의 부호화와 복호과정을 체계적으로 연구, 분석하고 실제로 통신 시스템에 응용할 수 있도록 유한체 GF($2^5$)의 심볼로 이루어지는 2중 오류정정(31,27)RS 부호의 부호기와 복호기를 설계하여 TTL IC로 장치화 하였다.

  • PDF

내지진용 리드스위치를 이용한 일체형원자로용 위치지시기 개발 (Development of Control Rod Position Indicator using Seismic-Resistance Reed Switches for Integral Reactor)

  • 유제용;김지호;허형;최명환;손동성
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.593-596
    • /
    • 2008
  • The reed switch position transmitter (RSPT) is used as a position indicator for the control rod in commercial nuclear power plants made by ABB-CE. But this position indicator has some problems when directly adopting it to the integral reactor. The Control Element Drive Mechanism (CEDM) for the integral reactor is designed to raise and lower the control rod in steps of 2mm in order to satisfy the design features of the integral reactor which are the soluble boron free operation and the use of a nuclear heating for the reactor start-up. Therefore the resolution of the position indicator for the integral reactor should be achieved to sense the position of the control rod more precisely than that of the RSPT of the ABB-CE. This paper adopts seismic resistance reed switches to the position indicator in order to reduce the damages or impacts during the handling of the position indicator and earthquake.

  • PDF

HF 데이터 통신에서 디지털 모뎀을 위한 RS 및 컨볼루션 부호의 연접 부호 성능 (Performance of Concatenated Reed-Solomon and Convolutional Codes for Digital Modems in HF Data Communications)

  • 김정창;양규식;정기룡;박동국;정성훈
    • 한국항행학회논문지
    • /
    • 제16권2호
    • /
    • pp.190-196
    • /
    • 2012
  • 본 논문에서는 HF (high frequency) 데이터 통신을 위한 디지털 모뎀의 성능 향상을 위하여 개선된 오류정정부호 방식을 제안하고 성능을 검증한다. 제안하는 오류정정부호 방식은 외부의 Reed-Solomon 부호와 내부의 컨볼루션 부호를 연접하여 만들어진다. 시뮬레이션 결과는 제안하는 시스템이 기존 PACTOR-III 규격의 오류정정부호 방식을 사용하는 시스템에 비해 비트 오율 성능을 크게 향상시킴을 보여준다. 따라서 제안하는 부호화 방식을 사용하여 HF 데이터 통신을 위한 디지털 모뎀의 대역폭 효율성을 크게 향상시킬 수 있을 것이다.

극저온 선형 팽창기용 리드밸브의 기하학적 형상변화에 따른 유동 특성 연구 (A Study on the Flow Characteristics of Reed Valve with Variable Geometric Variations for Cryogenic Linear Expander)

  • 정은아;김지우;염한길;윤소남
    • 드라이브 ㆍ 컨트롤
    • /
    • 제12권4호
    • /
    • pp.48-53
    • /
    • 2015
  • This paper deals with the flow characteristics of a reed valve analyzed using computational dynamics(CFD) for optimal design. The seat sizes of the valve are modeled asØ6[mm] and Ø8[mm] to compare the flow characteristics. The inlet boundary condition is entered at 10[kPa], 15[kPa], 20[kPa], and 30[kPa] and the outlet boundary condition is set to the atmospheric pressure. The flow coefficient(C) and pressure loss coefficient(K) are calculated from the results of flow analysis. From the analysis results, it was confirmed that the flow coefficient of a reed valve having a seat size of Ø6[mm] is greater than that having a seat size of Ø8[mm], and the coefficient of pressure loss of a valve with a seat size of Ø6[mm] is lower than the Ø8[mm] size valve.

고산지대 초지에서 생산된 화본과목초의 사료가치 (Forage Quality of Several Grasses Grown ay a High Altitude Pasture)

  • 김동암;한건준
    • 한국초지조사료학회지
    • /
    • 제14권1호
    • /
    • pp.18-26
    • /
    • 1994
  • Forage quality evaluation with several grasses grown at a high altitude pasture situated at 1,000m above sea level was made to determine what is the feed value of these grasses and whether these grasses have any differences in forage quality compared with the grdsses grown at lowland pastures. In this experiment, Common, Venture, and Palaton reed canarygrass (Phahris arundinucea L.) and Climax timothy (Phleum pratense L.) were used and harvested at two different dates, 5 July and 30 September, 1989. Cmde protein (CP) concentrations in the grasses grown in September were higher than in July. Among the grasses grown, Palaton and Common reed canarygrass were highest in CP concentration in July and September, respectively. Acid detergent fiber (ADF) and neutral detergent fiber (NDF) concentrations in the grasses harvested in July were higher than in September. Palaton reed canruygrass was lowest in ADF and NDF concentrations at the both harvest dates. Relative feed value (RFV) in the grases harvested in July was ranged from 92 to 105 and that in September was from 110 to 117. Palation reed canarygrass had the highest RFV of 105 and 117 in July and September, respectively, therefore, the forage quality of this grass was ranked as Grade 2 based on the AFGC Hay Quality Standards. Overall forage quality of the grasses grown at a high altitude pasture seemed to be higher than the forage quality at lowland pastures. Based on the RFV assigned by the AFGC, forages with RFV 92 to 117 in this experiment could only work well in rations for low producing dairy cows.

  • PDF

Reed-Solomon 부호화/복호화를 위한 DSP 명령어 및 하드웨어 설계 (Design of DSP Instructions and their Hardware Architecture for Reed-Solomon Codecs)

  • 이재성;선우명훈
    • 한국통신학회논문지
    • /
    • 제28권6A호
    • /
    • pp.405-413
    • /
    • 2003
  • 본 논문은 오류 정정을 위해 가장 많이 쓰이는 알고리즘 중 하나인 RS (Reed- Solomon) 부호화 및 복호화를 DSP (Digital Signal Processor) 칩에서 효율적으로 구현할 수 있는 새로운 명령어 및 하드웨어 구조를 제안한다. 제안한 구조는 원시 다항식의 변경에 따라 하드웨어를 재 설계할 필요가 없이 DSP 상에서 프로그램으로 변경이 가능하여 다양한 원시 다항식을 구현할 수 있다. 새로운 명령어 및 하드웨어 구조는 유한체 곱셈기 및 가산기를 이용하여 유한체 연산을 수행한다. 따라서, 제안한 DSP 구조는 기존 DSP 칩과 비교하여 복호화 속도를 향상시킬 수 있다. 본 하드웨어 구조는 130MHz 동작 주파수를 갖는 DSP 칩에서 228.1 Mbps의 RS 복호화 성능을 갖는다.

GFDD에 기초한 디지털논리시스템 구성 (Construction of Digital Logic Systems based on the GFDD)

  • 박춘명
    • 한국정보통신학회논문지
    • /
    • 제9권8호
    • /
    • pp.1774-1779
    • /
    • 2005
  • 본 논문에서는 그래프 이론에 기초를 둔 GFDD를 사용하여 디지털논리시스템을 구성하는 한가지 방법을 제안하였다. 제안한 방법은 먼저 유한체와 그래프 이론의 수학적 성질을 논의하였으며, 단일변수에 대한 동작영역과 함수영역간의 변환을 용이하게 하기 위한 변환행렬 $\psi$GF(P)(1)과 $\xi$GF(P)(1)을 논의하였다. 그리고 디지털스위칭함수를 구하기 위한 Reed-Muller 확장을 논의하였으며, 이를 다변수인 경우로 확장하기 위해 Kronecker Product를 논의하였다.

파이프라인 재귀적인 기술을 이용한 면적 효율적인 Reed-Solomon 복호기의 설계 (Design of an Area-Efficient Reed-Solomon Decoder using Pipelined Recursive Technique)

  • 이한호
    • 대한전자공학회논문지SD
    • /
    • 제42권7호
    • /
    • pp.27-36
    • /
    • 2005
  • 본 논문은 무선 및 초고속 광통신등 다양한 통신 시스템에서 사용되는 고속 Reed-Solomon (RS) 복호기의 하드웨어 면적을 줄인 새로운 구조를 소개한다. 특히 folding 기술을 이용하여 높은 처리율(throughput)과 적은 하드웨어 복잡도(hardware complexity)를 가지고 있는 새로운 PrME (Pipelined recursive Modified Euclidean) 구조를 제안한다 제안된 PrME 구조는 일반적으로 사용되는 systolic-array 그리고 완전한 병렬(fully-parallel) 구조와 비교하여 하드웨어 복잡도를 약 80$\%$정도 줄일 수 있다. 제안된 RS 복호기는 1.2 V의 공급전압과 0.13-um CMOS 기술을 사용하여 설계하고 구현하였는데, 총 24,600개의 게이트수, 5-Gbit/s의 데이터 처리율과 클락 주파수 625 MHz에서 동작함을 보여준다. 제안된 면적 효율적인 PrME 구조에 기반한 RS 복호기는 초고속 광통신뿐만 아니라 무선통신을 위한 차세대 FEC구조 등에 바로 적용될 수 있을 것이다.