• 제목/요약/키워드: RC Core

검색결과 155건 처리시간 0.029초

Performance based assessment for tall core structures consisting of buckling restrained braced frames and RC walls

  • Beiraghi, Hamid;Alinaghi, Ali
    • Earthquakes and Structures
    • /
    • 제21권5호
    • /
    • pp.515-530
    • /
    • 2021
  • In a tall reinforced concrete (RC) core wall system subjected to strong ground motions, inelastic behavior near the base as well as mid-height of the wall is possible. Generally, the formation of plastic hinge in a core wall system may lead to extensive damage and significant repairing cost. A new configuration of core structures consisting of buckling restrained braced frames (BRBFs) and RC walls is an interesting idea in tall building seismic design. This concept can be used in the plan configuration of tall core wall systems. In this study, tall buildings with different configurations of combined core systems were designed and analyzed. Nonlinear time history analysis at severe earthquake level was performed and the results were compared for different configurations. The results demonstrate that using enough BRBFs can reduce the large curvature ductility demand at the base and mid-height of RC core wall systems and also can reduce the maximum inter-story drift ratio. For a better investigation of the structural behavior, the probabilistic approach can lead to in-depth insight. Therefore, incremental dynamic analysis (IDA) curves were calculated to assess the performance. Fragility curves at different limit states were then extracted and compared. Mean IDA curves demonstrate better behavior for a combined system, compared with conventional RC core wall systems. Collapse margin ratio for a RC core wall only system and RC core with enough BRBFs were almost 1.05 and 1.92 respectively. Therefore, it appears that using one RC core wall combined with enough BRBF core is an effective idea to achieve more confidence against tall building collapse and the results demonstrated the potential of the proposed system.

RC 계단실 연속화 시공을 위한 PC 계단 공법 현장사례 분석 (Analysis of Construction Cases for Sequential PC Stairway Method)

  • 이석용;임홍철;김욱종;조홍덕;정미라
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2008년도 춘계 학술논문 발표대회
    • /
    • pp.15-19
    • /
    • 2008
  • The use of Precast Concrete (PC) stairways is increasing to replace existing Reinforced Concrete (RC) stairways for the faster construction and the better quality control. Among several already developed PC stairway construction methods, RC Core Sequential Construction Method by Using PC Stairways (COSEC) has advantages of 1) allowing core of a building to be built prior to PC stairways so that two different procedures will not interfere with each other, and 2) having a newly developed joint connection with the core so that the RC core and PC stairways can be easily put together. In this paper, cases of several construction sites with the PC stairways method are analyzed. The elements of the developed method are described for further application and improvement.

  • PDF

강남콩 잎의 노화에 있어서 식물 호르몬의 역할 (Role of Plant Hormones in the Senescing Detached Leaves of Phaseolus vulgaris)

  • 이동희;서영희;김영상
    • 생명과학회지
    • /
    • 제7권4호
    • /
    • pp.297-308
    • /
    • 1997
  • NAA, GA$_{3}$ 및 BA등의 식물 호르몬이 노화중인 강남콩 잎의 엽록소-단백질 복합체의 분해에 미치는 효과를 조사하였다. 노화의 대표적인 특징인 엽록소의 소실은 엽록소-단백질 복합체의 분해를 수반하였다. 암유도 노화과정동안, PSI 복합체는 급격히 감소한 반면 RC-Core3은 오히려 조화 중기까지 조금씩 증가하다가 이후 서서히 분해되었다. 그리고 LHCII는 노화 과정 후기부터 점진적으로 분해되었다. NAA와 GA$_{3}$는 노화동안 엽록소-단백질 복합체의 분해를 억제하는데 거의 영향을 미치지 못 하였다. 그러나 BA는 노화 과정동안 엽록소-단백질 복합체, 특히 RC-Core1, RC-Core2와 SC-1의 분해를 억제하는데 매우 효과적이었다. 한편 식물 호르몬과 광선의 동시 처리에 있어서, BA와 광선의 동시 처리는 노화 과정동안 엽록소-단백질 복합체, 특히 PSI, LHCII, RC-Core2, RC-Core3과 SC-1의 분해를 억제하는데 가장 효과적이었다. 이와 같은 결과에서 노화 과정동안 엽록소-단백질 복합체는 BA 혹은 광선의 단독 처리보다 BA와 광선의 동시 처리에 의하여 보다 높은 안정성을 가질 것으로 사료된다.

  • PDF

Seismic response analysis of RC frame core-tube building with self-centering braces

  • Xu, Long-He;Xiao, Shui-Jing;Lu, Xiao
    • Structural Monitoring and Maintenance
    • /
    • 제5권2호
    • /
    • pp.189-204
    • /
    • 2018
  • This paper examines the seismic responses of a reinforced concrete (RC) frame core-tube building with pre-pressed spring self-centering energy dissipation (PS-SCED) braces. The PS-SCED brace system consists of friction devices for energy dissipation, pre-pressed combination disc springs for self-centering and tube members as guiding elements. A constitutive model of self-centering flag-shaped hysteresis for PS-SCED brace is developed to better simulate the seismic responses of the RC frame core-tube building with PS-SCED braces, which is also verified by the tests of two braces under low cyclic reversed loading. Results indicate that the self-centering and energy dissipation capabilities are well predicted by the proposed constitutive model of the PS-SCED brace. The structure with PS-SCED braces presents similar peak story drift ratio, smaller peak acceleration, smaller base shear force and much smaller residual deformations as compared to the RC frame core-tube building with bucking-restrained braces (BRBs).

Optimum location of second outrigger in RC core walls subjected to NF earthquakes

  • Beiraghi, Hamid;Hedayati, Mansooreh
    • Steel and Composite Structures
    • /
    • 제38권6호
    • /
    • pp.671-690
    • /
    • 2021
  • Seismic responses of RC core wall with two outriggers are investigated in this study. In the models analyzed here, one of the outriggers is fixed at the top of the building and the second is placed at different levels along the height of the system. Each of the systems resulting from the placement of the outrigger at different locations is designed according to the prescriptive codes. The location of the outrigger changes along the height. Linear design of all the structures is accomplished by using prescriptive codes. Buckling restrained braces (BRBs) are used in the outriggers and forward directivity near fault and far fault earthquake record sets are used at maximum considered earthquake (MCE) level. Results from nonlinear time history analysis demonstrate that BRB outriggers can change the seismic responses like force distribution and deformation demand of the RC core-walls over the height and lead to the new plastic hinge arrangement over the core-wall height. Plasticity extension in the RC core wall occurs at the base as well as adjacent to the outrigger levels. Considering the maximum inter-story drift ratio (IDR) demand as an engineering parameter, the best location for the second outrigger is at 0.75H, in which the maximum IDR at the region upper the second outrigger level is approximately equal to the corresponding value in the lower region.

강낭콩 잎의 노화에 있어서 식물 호르몬의 역할 (Role of Plant Hormones in the Senescing Detached Leaves of Phaseolus vulgaris)

  • 이동희;서영희;김영상
    • 생명과학회지
    • /
    • 제7권4호
    • /
    • pp.308-308
    • /
    • 1997
  • NAA, GA$_{3}$ 및 BA등의 식물 호르몬이 노화중인 강남콩 잎의 엽록소-단백질 복합체의 분해에 미치는 효과를 조사하였다. 노화의 대표적인 특징인 엽록소의 소실은 엽록소-단백질 복합체의 분해를 수반하였다. 암유도 노화과정동안, PSI 복합체는 급격히 감소한 반면 RC-Core3은 오히려 조화 중기까지 조금씩 증가하다가 이후 서서히 분해되었다. 그리고 LHCII는 노화 과정 후기부터 점진적으로 분해되었다. NAA와 GA$_{3}$는 노화동안 엽록소-단백질 복합체의 분해를 억제하는데 거의 영향을 미치지 못 하였다. 그러나 BA는 노화 과정동안 엽록소-단백질 복합체, 특히 RC-Core1, RC-Core2와 SC-1의 분해를 억제하는데 매우 효과적이었다. 한편 식물 호르몬과 광선의 동시 처리에 있어서, BA와 광선의 동시 처리는 노화 과정동안 엽록소-단백질 복합체, 특히 PSI, LHCII, RC-Core2, RC-Core3과 SC-1의 분해를 억제하는데 가장 효과적이었다. 이와 같은 결과에서 노화 과정동안 엽록소-단백질 복합체는 BA 혹은 광선의 단독 처리보다 BA와 광선의 동시 처리에 의하여 보다 높은 안정성을 가질 것으로 사료된다.

핵심감정척도 단축형과 MMPI-2의 상관성 연구 (A Study on the Correlation between CSEI-S (Core Seven-Emotions Inventory-Short Form) and MMPI-2 (Minnesota Multiphasic Personality Inventory-2) Subscales)

  • 신혜규;이재혁
    • 동의신경정신과학회지
    • /
    • 제32권3호
    • /
    • pp.155-166
    • /
    • 2021
  • Objectives: To analyze correlation between CSEI-S and MMPI-2 subscales to provide evidence for clinical application of the CSEI-S. Methods: Survey data of CSEI-S and MMPI-2 from 109 university students were analyzed. Demographic characteristics were subjected to descriptive analysis. Mann-Whitney U test and Pearson's correlation analysis were performed for CSEI-S and MMPI-2 scores. Results: The CSEI-S scale Joy (喜) showed a negative correlation with MMPI-2 clinical scales Hs, D, Hy, Pd, Pa, Pt, Sc, and Si. Six negative emotion scales of the CSEI-S showed positive correlations with MMPI-2 clinical scales except Mf and Ma. The CSEI-S scale Joy (喜) showed negative correlations with MMPI-2 restructured clinical scales RCd, RC1, RC2, and RC7. Six negative emotion scales of the CSEI-S showed positive correlations with restructured MMPI-2 clinical scales. The 60T-and-over group of MMPI-2 clinical scales D, Pd, Pa, Pt, Sc, Si, and Si showed significantly higher negative emotions than other groups. The 60T-and-over group of MMPI-2 scales D, Pt, Sc, and Si showed significantly lower Joy (喜) score than other groups. The 60T-and-over group of MMPI-2 restructured clinical scales RCd, RC2, RC3, RC6, RC7, RC8, and RC9 showed significantly higher negative emotions than other groups. The 60T-and-over group of MMPI-2 scales RCd, RC6, and RC7 showed significantly lower Joy (喜) scores than others. Conclusions: The CSEI-S showed consistent results with the original CSEI and MMPI-2 subscales. Thus, is a useful diagnostic tool in clinical practice.

Seismic fragility analysis of RC frame-core wall buildings under the combined vertical and horizontal ground motions

  • Taslimi, Arsam;Tehranizadeh, Mohsen;Shamlu, Mohammadreza
    • Earthquakes and Structures
    • /
    • 제20권2호
    • /
    • pp.175-185
    • /
    • 2021
  • This study strives to highlight the importance of considering the vertical ground motions (VGM) in the seismic evaluation of RC buildings. To this aim, IDA (Incremental Dynamic Analysis) is conducted on three code-based designed high-rise RC frame-core wall buildings using a suite of earthquake records comprising of significant VGMs. To unravel the significance of the VGM inclusion on the performance of the buildings, IDAs are conducted in two states (with and without the vertical component), and subsequently based on each analysis, fragility curves are developed. Non-simulated collapse criteria are used to determine the collapse state drift ratio and the area under the velocity spectrum (SIm) is taken into account as the intensity measure. The outcome of this study delineates that the inclusion of VGM leads to the increase in the collapse vulnerability of the structures as well as to the change in the pattern of inter-story drifts and failure mode of the buildings. The results suggested that it would be more conservative if the VGM is included in the seismic assessment and the fragility analysis of RC buildings.

기억자심에서의 정보선택의 고속화방법 (A Method for the high speed selection of information in the magnetic memory core)

  • 이주근
    • 대한전자공학회논문지
    • /
    • 제6권3호
    • /
    • pp.1-7
    • /
    • 1969
  • 전류일치방식의 기억자심으로부터 기억정보를 고속도로 선택하기 위한 방법으로서, Word선에 RC선형집중회로를 종단하고 이 회로의 시정수를 작은치로 설정하여 선택 Pulse의 Cycle time을 2∼3μs로 단축시킴으로써 자심의 고속구동화를 시도하였다. 이를 위한 계의 해석방법과 회로정수의 최적치를 결정하고, 또 Cycle time의 단축에 결정적 요인이 되는 자심의 열적문제점에 대해서도 평가하였다. 이론치와 측정치가 잘 일치하였으며 Cycle time의 현저한 개선을 보아 이 방법이 고속화에 간단하고도 유효한 방법임을 확인하였다.

  • PDF

Strength enhancement in confined concrete with consideration of flexural flexibilities of ties

  • Teerawong, J.;Lukkunaprasit, P.;Senjuntichai, T.
    • Structural Engineering and Mechanics
    • /
    • 제18권2호
    • /
    • pp.151-166
    • /
    • 2004
  • The interaction between concrete core expansion and deformation of perimeter ties has been known to have a significant effect on the effective confinement of rectangular reinforced concrete (RC) tied columns. This interaction produces passive confining pressure to the concrete core. Most existing models for determining the response of RC tied columns do not directly account for the influence of flexural stiffness of the ties and the variation of confining stress along the column height. This study presents a procedure for determining the confined compressive strength of RC square columns confined by rectilinear ties with various tie configurations considering directly the influence of flexural flexibility of the ties and the variation of confining stress along the vertical direction. The concept of area compatibility is employed to ensure compatibility of the concrete core and steel hoop in a global sense. The proposed procedure yields satisfactory predictions of confined strengths compared with experimental results, and the influence of tie flexibility, tie configuration and degree of confinement can be well captured.