• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1659-1666
• /
• 1998

The multicode CDMA systems that are widely studied as an effective transmission methodology in the IMT-2000 systems, employ orthogonal codes to transform high rate data into parallel, low rate data for simultaneous transmission. In this paper, we propose a new multicode CDMA system which achieves the same data rate and processing gain of the conventional systems, while significantly improves bit error rate performance by exploiting a convolutional code with code rate r=1/2 and a bi-orthogonal code. The simulation results for synchronous systems using maximal ratio combining Rake receivers under additive white Gaussian noise and multi-path fading channels, show significant improviements by the proposed system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.1-10
• /
• 2010

Impulse Radio Ultra-wideband (IR-UWB) system employing the short pulse has the tolerable characteristics for the multipath environment. The corresponding transceiver with low power consumption can be simply implemented. On the other hand, in the receiver side, the precise channel estimation is required for the knowledge of essence in channel due to the short period of pulse. The estimated gains and delays in channel are used in the rake receiver. The resulting parameters we search have a strong influence on the performance in the entire system. We introduce that the essential parameters can be obtained more precisely through the preamble in receiver side for the channel estimation and related technologies are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.319-328
• /
• 1999

It is necessary to devise the method for increasing bandwidth efficiency in order to provide the high speed mobile multi-media communication services with CDMA under the limited radio bandwidth resources. In this paper the structure for transmitting the high speed data at the half bandwidth of the required bandwidth using the symmetry property of the IFFT output of the binary input MC-CDMA, which enables the time scaling method utilized, is proposed. The processing gain is increased 4 times than the DS-CDMA and its performance is evaluated as better than DS-CDMA with rake receivers under the Rayleigh fading channel and same bandwidth per one channel.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.3
• /
• pp.36-47
• /
• 2003

Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.709-719
• /
• 1997

Performance of an algorithm can be mesaurde from serval aspects.Suppose thre is a query formulation al-gorithm.Even though this algorithm shows high retrival performance, ie, high recall and percision, retriveing items can rake a long time.In this study, we time complexity of automatic query reformulation algorithms, named the query Tree, DNF method, and Dillon's method, and comparethem in theoretical and practical aspects using a tral-time performance)the absolute times for each algorithm to fromulate a query)in a Sun SparcStation 2. In experiments using three test sets, CSCM, CISI, and Medlars, the query Tree algorithm was the fastest among the three algorithms tested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.271-278
• /
• 2003

In this paper, we propose a new MLP based detector which has low circuit complexity and fast adaptation capability for CDMA downlink in frequency selective fading, and is easy for parameter optimization. The simplified structure of the proposed MLP is designed by making use of transmission characteristics of downlinks such that all users signals transmitted over same propagation paths and the number of channelization codes are limited. Significant performance improvement over Rake receiver can be obtained with the proposed MLP and the efficiency of the proposed MLP was compared with that of conventional MLP.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.192-197
• /
• 2002

In this study, examined the cutting characteristics of alumuminum alloy AC8A-T6 that is used to present car piston materials. And in been holding materials machining empirically escape as result that experiment comparison changing the cutting speed and feed on various condition to choose efficient machining condition. The following results can be summarized from this research. 1. As the cutting speed decreased, principal cutting force and thrust cutting force is increased, and reason that cutting force interacts greatly in the low cutting speed is thought by result by BUE's stabilization. 2. The feed speed and cutting speed increase, friction factor is decrescent and the cause appeared the thrust cutting force is fallen than cutting force relatively because chip flow according to increase of the feed rate is constraint. 3. Though specific cutting resistance grows cutting area and the feed rate are few, the cause was expose that shear angle decreases by rake face of tool gets into negative angle remarkably as wear of a cutting tool or defect part of workpiece is cut. 4. Cutting speed do greatly depth of cut is slow, surface roughness examined closely through an experiment that becomes bad, and know that it can get good surface that process cutting speed because do feed rate by 0.1mm/rev low more than 250m/min to get good surface roughness can.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.34-40
• /
• 2004

Two different type scramjet models with side-wall compression and top-wall compression inlets have been tested in HPTF (Hypersonic Propulsion Test Facility) under the experimental conditions of Mach number 5.8, total temperature 1700K, total pressure 4.5㎫ and mass flow rate 3.5kg/s. The liquid kerosene was used as main fuel for the scramjets. In order to get fast ignition in the combustor, a small amount of hydrogen was used as a pilot. A strut with alternative tail was employed for increasing the compression ratio and for mixing enhancement in the side-wall compression case. Recessed cavities were used as a flameholder for combustion stability. The combustion efficiency was estimated by one dimensional theory. The uniformity of the facility nozzle flow was verified by a scanning pitot rake. The experimental results showed that the kerosene fuel was successfully ignited and stable combustion was achieved for both scramjet models. However the thrusts were still less than the model drags due to the low combustion efficiencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.674-681
• /
• 2006

In this paper, a new receiver with low complexity for a DS-UWB system which can eliminate efficiently the multiple access interference and the detrimental effects caused by multi-paths is proposed. The performance of conventional DS-UWB receivers depends greatly on the types and lengths of spreading codes. Generally, as the length of spreading codes increases, the receiver performance improves. But, the receiver performance does not improve satisfactorily in a multi-paths fading environment. Through computer simulations, it can be shown that the proposed DS-UWB receiver eliminate the multi-paths effects efficiently in a multi-user, multi-paths fading environment, and the user capacity can be increased dramatically using the proposed receiver.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.72-77
• /
• 1999

This paper presents 2-dimensional vibration cutting increases dynamic stiffness of tool support and improves the quality of machined surface in micro-machining. 2-dimensional vibration cutting is generated by two piezo actuators arranged orthogonally. A sine-type voltage is input to one actuator and a phase-shifted sine-type voltage is input the other. Then the vibration device actuates the tool in a 2-D elliptical motion with pulsed cutting force. It is a characteristic of 2-D vibration cutting that some negative thrust force occurs as the direction of friction on a tool rake surface is reversed. It helps not only chip flow smoothly and continuously but also cutting force be reduced. The quality of machined surface by 2-D vibration cutting depends on such parameters as vibration amplitude, frequency, cutting speed, depth of cut, etc. Compared to conventional cutting through tool path simulation and experiments under several conditions, the 2-D vibration cutting is verified to bring forth a great decrease of cutting forces, much better surface roughness and moreover much less burr.