• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1351-1353
• /
• 2000

In this paper, it is proposed to constant power control of solar power system. The solar power system has disadvantage that low power density and variable power output. Proposed strategy is controled by DC/DC converter using phase shift PWM and I-PD type control applying type 1 digital system. The validity of proposed control strategy is verified from simulations results using PSIM.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.666-670
• /
• 2007

Aluminuim doped zinc oxide(ZnO:AL)Films have been prepared on Polyimide(PI) and Coming 7059 glass substrates by r.f. magnetron sputtering method. The structural of the ZnO:Al films were studied in accordance with various deposition R.F power and working pressure by XRD, SEM. And The electrical and optical properties of ZnO:Al films were characterized by Hall effect and UN visible spectrophotometer measurements, ZnO:Al films had were hexagonal wurtzite structure and dominant c-axis orientation. The R.f power and working pressure for optimum condition to fabricate the transparent conductive films using a PI substrate were 2 mTorr and 100W, respectively. The resistivity of the ZnO:Al films prepared under this condition were $9.6{\times}10^{-4}{\Omega}cm$. The optical transmittance of 400nm thick films at 550nm is ${\sim}85 %$.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1262-1263
• /
• 2008

Recently film-typed dye sensitized solar cell(DSC) attracts much attention with increasing applications for its flexibility and transparency. The ZnO:Al thin film, which serves mainly as transparent conducting electrode, Aluminium-doped zinc oxide(ZnO:Al) thin film has emerged as one of the most promising transparent conducting films since it is inexpensive, mechanically stable, and highly resistant to deoxidation. In this paper ZnO:Al thin film was deposited on the polyethylene terephthalate(PET) substrate by the capacitively coupled r. f. magnetron sputtering method. The effects of gas pressure and r. f. discharge power on the morphological, electrical and optical properties of ZnO:Al thin film were studied. Especially the variation in substrate thickness after sputtering and surface morphology of the substrate were investigated and clarified. The results showed that the film deposited on the PET substrate at r. f. discharge power of 180 W showed the minimum resistivity of about $1.5{\times}10^{-3}{\Omega}-cm$ and a transmittance of about 93%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.1
• /
• pp.38-42
• /
• 2006

We report 1/f noise PSD(Power Spectrum Density) of sub-100 nm MOSFETs as a function of various parameters such as HCS (Hot Carrier Stress), bias condition, temperature, device size and types of MOSFETs. The noise spectra of sub-100 nm devices showed Lorentzian-like noise spectra. We could check roughly the position of a dominant noise source by changing $V_{DS}$. With increasing measurement temperature, the 1/f noise PSD of 50 nm PMOS device decreases, but there is no decrease in the noise of NMOS device. RTN (Random Telegraph Noise) was measured from the device that shows clearly a Lorentzian-like noise spectrum in 1/f noise spectrum.

• Journal of applied mathematics & informatics
• /
• v.32 no.3_4
• /
• pp.529-537
• /
• 2014

The paper introduces a new product of polynomials defined over a field. It is a generalization of the ordinary product with inner polynomial getting non-overlapping segments obtained by multiplying with coefficients and variable with expanding powers. It has been called 'Ordered Power Product' (OPP). Considering two rings of polynomials $R_m[x]=F[x]modulox^m-1$ and $R_n[x]=F[x]modulox^n-1$, over a field F, the paper then considers the newly introduced product of the two polynomial rings. Properties and algebraic structure of the product of two rings of polynomials are studied and it is shown to be a ring. Using the new type of product of polynomials, we define a new product of two cyclic codes and devise a method of getting a cyclic code from the 'ordered power product' of two cyclic codes. Conditions for the OPP of the generators polynomials of component codes, giving a cyclic code are examined. It is shown that OPP cyclic code so obtained is more efficient than the one that can be obtained by Kronecker type of product of the same component codes.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.309-310
• /
• 2010

일반적으로 유도전동기를 구동시키기 위한 범용 인버터는 입력 전원에 정전이 발생하였을 경우 부하에 따라 수msec에서 수백msec 안에 저전압 트립이 발생하여 PWM 출력이 차단된다. 부하의 관성이 큰 경우 전원이 복구 되었을 때, 기존의 속도로 제어되기 위해서는 부하가 완전히 멈춘 후 인버터를 구동시키고, 다시 큰 관성의 부하를 가속하는데 긴 시간이 필요하다. 본 논문은 유도전동기를 V/f 제어방법으로 운전할 경우 정전이 발생했을 때 인버터의 출력을 차단하지 않고 연속적인 제어를 행하는 Ride-Through 방법으로서 부하의 관성 에너지를 인버터 직류단에 회생시키도록 출력 주파수를 제어하는 방법을 제안하고 실험을 통해 이를 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.306-308
• /
• 1996

The demands of minimizing the reactive power and reducing the current harmonics are increasing nowdays. The inverter airconditioner needs high inductive power and it operates with wide load ranges. Conventionally, an huge LC passive filter is used in airconditioner to improve the power factor and to reduce current harmonics which doesn't give good results. In this paper, a design of active power factor correction(APFC)circuit for inverter airconditioner is described. To improve the P.F and reduce the current THD, average current controlled APFC is designed and tested. The problems of APFC implementation, their solution and testing results are described.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.865-870
• /
• 1998

We propose a multifunctional power line compensator (PLC) which can individually compensate multiple impediments at the same time. The PLC has the flexibility to share power to each compensation according to commands, this improving the working rate. We constructed a 100kVA PLC model including a controller with digital signal processor (DSP) to realize a multifunctional compensation were obtained.

• Korean Journal of Mathematics
• /
• v.12 no.1
• /
• pp.15-22
• /
• 2004

In this paper we establish some recurrence relations satisfied by quotient moments of upper record values from the power distribution. Let {$X_n$, $n{\geq}1$} be a sequence of independent an identically distributed random variables with a common continuous distribution function(cdf) $F(x)$ and probability density function(pdf) $f(x)$. Let $Y_n=max\{X_1,X_2,{\cdots},X_n\}$ for $n{\geq}1$. We say $X_j$ is an upper record value of {$X_n$, $n{\geq}1$}, if $Y_j$ > $Y_{j-1}$, $j$ > 1. The indices at which the upper record values occur are given by the record times {$u(n)$}, $n{\geq}1$, where $u(n)=min\{j{\mid}j>u(n-1),X_j>X_{u(n-1)},n{\geq}2\}$ and $u(1)=1$. Suppose $X{\in}POW(0,1,{\theta})$ then $$E\left(\frac{X^r_{u(m)}}{X^{s+1}_{u(n)}}\right)=\frac{\theta}{s}E\left(\frac{X^r_{u(m)}}{X^s_{u(n-1)}}\right)+\frac{(s-\theta)}{s}E\left(\frac{X^r_{u(m)}}{X^s_{u(n)}\right)\;and\;E\left(\frac{X^{r+1}_{u(m)}}{X^s_{u(n)}}\right)=\frac{\theta}{n+1}\left[E\left(\frac{X^{r+1}_{u(m-1)}}{X^s_{u(n+1)}}\right)-E\left(\frac{X^{r+1}_{u(m)}}{X^s_{u(n-1)}}\right)+\frac{r+1}{\theta}E\left(\frac{X^r_{u(m)}}{X^s_{u(n)}}\right)\right]$$.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.1
• /
• pp.17-24
• /
• 1990

In this study, TiN film was deposited onto steel by R.F.-PACVD in order to investigate the influence of parameters on the adhesion strength between film and substrate. Experimental results showed that adhesion strength by SAT is different from by optical microscopy. Adhesion strength is increased when the deposition temperature increases and is influenced by R.F. power and electrode distance. Especially heat treatment on the substrate has influenced over the adhesion strength, so it showed the 22 Newtons in adhesion strength by SAT and adhesion strength is decreased when deposition thickeness is thick and hardness is high. Also if the film is thick and high hardness simultaneous, the film was delaminated seriously.