• 소성∙가공
• /
• 제16권6호
• /
• pp.457-462
• /
• 2007

The drawbeads, which are used for controlling the flow of the sheet into die cavity by imposing the tension and for preventing the forming defects like wrinkling, springback, etc. during the sheet forming process, affect the formability strongly because of the differences in the restraint and opening forces according to the drawbead shapes and dimensions. In this study, the experimental device enabling to measure the drawbead restraining and opening forces is manufactured and the drawing forces of circular, square, and step drawbeads are measured. The drawbead restraining and opening forces of a circular drawbead are increased as its drawbead height is increased. Similarly, those of a square drawbead are increased as its height is increased and shoulder radii decreased. The drawbead forces obtained from the experiment were compared with those calculated in the numerical simulation of stamping process of automotive fender. Good agreement was found so that the experimental measurements can be used in the simulation of auto-body stamping process.

• 소성∙가공
• /
• 제15권3호
• /
• pp.232-240
• /
• 2006

Magnesium alloys are expected to be widely used fur the parts of structural and electronic appliances due to their lightweight and EMI shielding characteristics. While the die casting has been mainly used to manufacture the parts from the magnesium alloys, the press forming is considered as an alternative to the die casting for saving the manufacturing cost and improving the structural strength of the magnesium alloy parts. However, the magnesium alloy has low formability at room temperature and therefore, in many cases, forming at elevated temperatures is necessary to obtain the required material flow without failure. In the present study, square cup deep drawing tests using the magnesium alloy AZ31 sheet were experimentally conducted at various elevated temperatures as well as room temperature, and the corresponding finite-element simulations, which calculated the damage evolution based on the Oyane's criterion, were conducted using the stress-strain relations from the tensile tests at various temperatures. The formability predictability by the finite-element analysis was investigated by comparing the predicted damage distributions over the deformed AZ31 sheet at elevated temperatures with the corresponding experimental deformations with failures.

• Steel and Composite Structures
• /
• 제5권6호
• /
• pp.459-484
• /
• 2005

In recent years, the use of steel tube confined concrete (STCC) columns has been the interests of many structural engineers. The present study is an attempt to study the monotonic and cyclic behaviours of STCC columns. For the monotonic behaviours, a series of tests on STCC stub columns (twenty one), and beam-columns (twenty) were carried out. The main parameters varied in the tests are: (1) column section types, circular and square; (2) tube diameter (or width) to thickness ratio, from 40 to 162, and (3) load eccentricity ratio (e/r), from 0 to 0.5. For the cyclic behaviours, the test parameters included the sectional types and the axial load level (n). Twelve STCC column specimens, including 6 specimens with circular sections and 6 specimens with square sections were tested under constant axial load and cyclically increasing flexural loading. Comparisons are made with predicted column strengths and flexural stiffness using the existing codes. It was found that STCC columns exhibit very high levels of energy dissipation and ductility, particularly when subjected to high axial loads. Generally, the energy dissipation ability of the columns with circular sections was much higher than those of the specimens with square sections. Comparisons are made with predicted column strengths and flexural stiffness using the existing codes such as AIJ-1997, AISCLRFD- 1994, BS5400-1979 and EC4-1994.

• Earthquakes and Structures
• /
• 제2권2호
• /
• pp.149-169
• /
• 2011

Dynamic response of two adjacent single degree-of-freedom (SDOF) structures connected with friction damper under base excitation is investigated. The base excitation is modeled as a stationary white-noise random process. As the force-deformation behavior of friction damper is non linear, the dynamic response of connected structures is obtained using the equivalent linearization technique. It is observed that there exists an optimum value of the limiting frictional force of the damper for which the mean square displacement and the mean square absolute acceleration responses of the connected structures attains the minimum value. The close form expressions for the optimum value of damper frictional force and corresponding mean square responses of the coupled undamped structures are derived. These expressions can be used for initial optimal design of the friction damper for connected structures. A parametric study is also carried out to investigate the influence of system parameters such as frequency ratio and mass ratio on the response of the coupled structures. It has been observed that the frequency ratio has significant effect on the performance of the friction damper, whereas the effects of mass ratio are marginal. Finally, the verification of the derived close from expressions is made by correlating the response of connected structures under real earthquake excitations.

• Geomechanics and Engineering
• /
• 제32권2호
• /
• pp.193-207
• /
• 2023

In general, the numerous classical approaches available in the literature can anticipate the settlement of shallow foundations. As long as the footings are not in close proximity to other subsurface buildings, the findings achieved using these methods are legitimate and acceptable. However, due to increased urbanisation and land scarcity, footings are frequently built close together. As a result, these footings' settlement behaviour differs from those of isolated footings. A simpler approach for assessing the settlement behaviour of two square or rectangular footings placed in close proximity is presented in this work. A Parametric study has been carried out to examine the interference effect on the settlement of these footings placed in close vicinity on the surface of a homogeneous, isotropic and elastic soil medium. The interaction factors are examined by varying the different aspect ratios (L/B), clear spacing ratio (S/B) and intensity of loading on the right footing with respect to the left footing. Further, variation of the settlement ratio (δ/B) with respect to embedment depth ratio D_f/B is examined. For square and rectangular footings, the interference settlement profile is also investigated by varying the clear spacing ratio (S/B) and the degree of loading. The results were compared to 3D finite element analysis and experimental data that were available.

• Journal of Plant Biotechnology
• /
• 제42권1호
• /
• pp.60-70
• /
• 2015

본 연구의 목적은 적외선 분광스펙트럼 데이터를 이용하여 대두 종자내의 지방산 함량을 동시에 예측할 수 있는지 여부를 조사하기 위한 것이다. 총 153종의 대두(Glycine max Merrill) 종자로부터 적외선 분광스펙트럼 및 지방산의 함량을 기체크로마토그라피 분석을 통하여 확인하였다. 적외선 분광스펙트럼 조사결과 대두는 단백질이나 아미노산의 amide bond region ($1,700{\sim}1,500cm^{-1}$), 핵산이나 인지질의 phosphodiester groups ($1,500{\sim}1,300cm^{-1}$) 그리고 탄수화물 등 다당류의 sugar region ($1,200{\sim}1,000cm^{-1}$)에서 계통별로 큰 차이가 이루어짐을 알 수 있었다. 총 29라인의 대두 계통별 시료로부터 지방산 함량을 조사한 결과 총 지방산의 함량은 건조 시료 0.1 g 당 $185.57{\mu}g$에서 $325.9{\mu}g$으로 계통간에 차이가 있었음을 알 수 있었으며 평균 함량은 $244.48{\mu}g$이었다. PLS regression 분석을 이용하여 총 5개 지방산(팔미틱산, 스테아릭산, 올레익산, 리노레익산 그리고 리노레닉산) 함량 예측 calibration models의 실측 검증 결과, 팔미틱산($R^2=0.8002$), 올레익산($R^2=0.8909$) 그리고 리노레익산($R^2=0.815$)은 회귀분석 상관계수가 0.8 이상으로 정확도 높음을 알 수 있었다. 그러나 스테아릭산($R^2=0.4598$)과 리노레닉산($R^2=0.6868$)의 경우 상관계수가 0.7 이하로 상대적으로 예측정확도가 낮음을 알 수 있었다. 본 연구에서 확립된 기술은 지방산의 조성 변환을 통하여 새로운 대두 품종 개발을 위한 계통선발 과정에서 매우 효율적인 수단으로 활용이 가능할 것으로 사료된다. 더 나아가 본 기술은 대두는 물론 대두 유래 농산물이나 식품의 품질 검증 수단으로 활용이 가능할 것으로 기대된다.

• 문화기술의 융합
• /
• 제5권2호
• /
• pp.247-255
• /
• 2019

본 연구는 간호학과 신입생들의 성격유형과 학습스타일, 학업성취도 간의 상관성을 탐구하기 위해 시행되었다. 간호학과 신입생 144명을 대상으로 2018년 3월 6일부터 5월 18일 까지 자료를 수집하였다. 결과 분석은 빈도와 백분율, 평균 및 표준편차, t-test와 ANOVA, Chi-square test 그리고 Pearson correlation coefficient로 확인하였다. 연구 대상자의 성격유형은 외향적 성향(58.3%)이 내향적 성향 보다 많았으며 감각적 성향(66.7%)과 감정형(77.8%)이 직관적 성향과 사고형 보다 많았고 판단형(50.7%)이 인지형 보다 많았다. 학업성취도는 여학생이 남학생 보다 높았고(t=3.277, p<.001), 내향적 성향이 외향적 성향 보다 높았다(t=3.541, p<.001). 성격유형별 학습스타일의 차이는 판단형이 다른 성격 유형간에 통계적으로 유의미한 차이를 보였다(${\chi}^2=18.409$, p<.001). 성별과 TF지표(r=.209, p<.05), 성별과 학업성취도(r=.265, p<.01), JP지표와 학습스타일(r=.262, p<.01), EI지표와 학업성취도(r=.285, p<.01) 사이에 유의한 양의 상관관계가 나타났다. 본 연구를 통해 확인된 간호학과 신입생의 성격유형, 학습스타일, 학업성취도 결과를 바탕으로 개인에게 적합한 교수-학습법의 개발 및 활용이 필요할 것이다.

• 대한수학회지
• /
• 제52권6호
• /
• pp.1323-1336
• /
• 2015

Let S be a semigroup with 0 and R be a ring with 1. We extend the definition of the zero-divisor graphs of commutative semigroups to not necessarily commutative semigroups. We define an annihilating-ideal graph of a ring as a special type of zero-divisor graph of a semigroup. We introduce two ways to define the zero-divisor graphs of semigroups. The first definition gives a directed graph ${\Gamma}$(S), and the other definition yields an undirected graph ${\overline{\Gamma}}$(S). It is shown that ${\Gamma}$(S) is not necessarily connected, but ${\overline{\Gamma}}$(S) is always connected and diam$({\overline{\Gamma}}(S)){\leq}3$. For a ring R define a directed graph ${\mathbb{APOG}}(R)$ to be equal to ${\Gamma}({\mathbb{IPO}}(R))$, where ${\mathbb{IPO}}(R)$ is a semigroup consisting of all products of two one-sided ideals of R, and define an undirected graph ${\overline{\mathbb{APOG}}}(R)$ to be equal to ${\overline{\Gamma}}({\mathbb{IPO}}(R))$. We show that R is an Artinian (resp., Noetherian) ring if and only if ${\mathbb{APOG}}(R)$ has DCC (resp., ACC) on some special subset of its vertices. Also, it is shown that ${\overline{\mathbb{APOG}}}(R)$ is a complete graph if and only if either $(D(R))^2=0,R$ is a direct product of two division rings, or R is a local ring with maximal ideal m such that ${\mathbb{IPO}}(R)=\{0,m,m^2,R\}$. Finally, we investigate the diameter and the girth of square matrix rings over commutative rings $M_{n{\times}n}(R)$ where $n{\geq} 2$.

• 임상간호연구
• /
• 제20권2호
• /
• pp.177-188
• /
• 2014

Purpose: This study was conducted to identify factors influencing endoscopy nurses' protective behavior against radiation exposure. Methods: Data were collected using self-report questionnaires from 122 endoscopy nurses in 21 hospitals located in Seoul, Gyeonggi province and six metropolitan cities in Korea. Collected data were analyzed using SPSS 18.0 program and included multiple regression analysis. Results: 1) There were significant relationships between protective behavior and protective environment (r=.74, p<.001), number of education sessions on radiation protection (r=.32, p<.001), number of protective devices (r=.28, p=.002), number of fellow nurses (r=.27, p=.003), and protective attitude (r=.18, p=.048). 2) Protective environment (${\beta}=0.79$, p<.001), type of hospital foundation (${\beta}=0.18$, p=.011) and marital status (${\beta}=-0.13$, p=.040) significantly predicted endoscopy nurses' protective behavior against radiation exposure (adjusted R square=.58, p<.001). The most powerful predictor for protective behavior against radiation exposure was a protective environment. Conclusion: Effective protective behavior of endoscopy nurses from radiation exposure requires improvement in their protective environment. Hospital administrators and managers should make efforts to increase protective facilities in endoscopy departments and provide endoscopy nurses with regular education on radiation protection.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1575-1577
• /
• 2009

We have investigated the characteristics of transparent indium zinc oxide(IZO)/Ag/IZO multilayer electrode grown on polyethylene terephthalate (PET) substrates using a specially designed roll-to-roll sputtering system for use in flexible device are described. By the continuous R2R sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, we were able to fabricate an IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 ${\Omega}$/square, optical transmittance of 87.4 %, and figure of merit value of 42.03 10-3 ${\Omega}$-1. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the RTR sputter grown single ITO electrode, due to the existence a ductile Ag layer between the IZO layers. This indicates that the RTR sputtered IZO-Ag-IZO multilayer is a promising flexible electrode that can substitute for the conventional single ITO electrode grown by bath type sputtering for use in low cost flexible device, due to its low resistance, high transparency, superior flexibility and fast preparation by the R2R process.