• KSBB Journal
• /
• v.11 no.3
• /
• pp.295-302
• /
• 1996

The measurements of rubisco parameters are important in photosynthetic studies. In this experiment, we used photometric assay method to detect these major parameters, such as activity, carbamylation and amount of rubisco. The main advantages of this method are very simple and as sensitive as conventional methods which usually produce radioactive waste. In this study, with kidney bean (Phaseolus vulgatis L.) leaves grown at normal $CO_2$ (350ppm) and high $CO_2$ (650 ppm), we investigated the effect of $CO_2$ concentration on activation and carbamylation of rubisco by measuring the rubisco activity, carbamylation rate and amount of rubisco using a dual beam (334nm and 405nm) spectrophotometer, and analyzed the polypeptide profiles of rubisco by SDS-PAGE. When $CO_2$ concentration was raised from 350ppm to 650ppm, all parameters of rubisco were decreased : $41.2{\mu}M/m^2/s and 52.2{\mu}M/m^2/s$ to $27.4{\mu}M/m^2/s and 46.1{\mu}M/m^2/s$ for initial and total rubisco activity, respectively ; from 79% to 58.9% for carbamylation rate ; from $1.94 {\mu}M/m^2$ to 1.58{\mu}M/m^2$ for amount of rubisco. These results suggests that the decrease in rubisco activity at high $CO_2$ was caused by carbamylation. The analysis of the preparation by SDS-PAGE showed two major polypeptides at 50 and 14.5 kD which were identified as the large and the small subunits of rubisco. There were no differences in the intensity compared high $CO_2$ to normal $CO_2$ in both 50 kD and 14.5 kD bands. We also found that these inhibitory effects of $CO_2$ were reversible. When high $CO_2$ was switched to normal $CO_2$, the parameters of rubisco changed were almost the same as normal rubisco parameters. These data provide an evidence that activity of rubisco was recovered by $CO_2$ concentration of 350 ppm.

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.191-204
• /
• 2010

Recently, the CO2 emission and energy consumption have become critical global issues to decide the future of nations. Especially, the spread of IT products and the increased use of internet and web applications result in the energy consumption and CO2 emission of IT industry though information technologies drive global economic growth. EU, the United States, Japan and other developed countries are using IT related environmental regulations such as WEEE(Waste Electrical and Electronic Equipment), RoHS(Restriction of the use of Certain Hazardous Substance), REACH(Registration, Evaluation, Authorization and Restriction of CHemicals) and EuP(Energy using Product), and have established systematic green business/IT strategies to enhance the competitiveness of IT industry. For example, the Japan government proposed the "Green IT initiative" for being compatible with economic growth and environmental protection. Not only energy saving technologies but energy saving systems have been developed for accomplishing sustainable development. Korea's CO2 emission and energy consumption continuously have grown at comparatively high rates. They are related to its industrial structure depending on high energy-consuming industries such as iron and steel Industry, automotive industry, shipbuilding industry, semiconductor industry, and so on. In particular, export proportion of IT manufacturing is quite high in Korea. For example, the global market share of the semiconductor such as DRAM was about 80% in 2008. Accordingly, Korea needs to establish a systematic strategy to respond to the global environmental regulations and to maintain competitiveness in the IT industry. However, green competitiveness of Korea ranked 11th among 15 major countries and R&D budget for green technology is not large enough to develop energy-saving technologies for infrastructure and value chain of low-carbon society though that grows at high rates. Moreover, there are no concrete action plans in Korea. This research aims to deduce the priorities of the Korean green business/IT strategies to use multi attribute weighted average method. We selected a panel of 19 experts who work at the green business related firms such as HP, IBM, Fujitsu and so on, and selected six assessment indices such as the urgency of the technology development, the technology gap between Korea and the developed countries, the effect of import substitution, the spillover effect of technology, the market growth, and the export potential of the package or stand-alone products by existing literature review. We submitted questionnaires at approximately weekly intervals to them for priorities of the green business/IT strategies. The strategies broadly classify as follows. The first strategy which consists of the green business/IT policy and standardization, process and performance management and IT industry and legislative alignment relates to government's role in the green economy. The second strategy relates to IT to support environment sustainability such as the travel and ways of working management, printer output and recycling, intelligent building, printer rationalization and collaboration and connectivity. The last strategy relates to green IT systems, services and usage such as the data center consolidation and energy management, hardware recycle decommission, server and storage virtualization, device power management, and service supplier management. All the questionnaires were assessed via a five-point Likert scale ranging from "very little" to "very large." Our findings show that the IT to support environment sustainability is prior to the other strategies. In detail, the green business /IT policy and standardization is the most important in the government's role. The strategies of intelligent building and the travel and ways of working management are prior to the others for supporting environment sustainability. Finally, the strategies for the data center consolidation and energy management and server and storage virtualization have the huge influence for green IT systems, services and usage This research results the following implications. The amount of energy consumption and CO2 emissions of IT equipment including electrical business equipment will need to be clearly indicated in order to manage the effect of green business/IT strategy. And it is necessary to develop tools that measure the performance of green business/IT by each step. Additionally, intelligent building could grow up in energy-saving, growth of low carbon and related industries together. It is necessary to expand the affect of virtualization though adjusting and controlling the relationship between the management teams.

• Investigative Magnetic Resonance Imaging
• /
• v.8 no.2
• /
• pp.79-85
• /
• 2004

Purpose : To evaluate the usefulness and reproducibility of $^1H$ MRS in different 1.5 T MR machines with different coils to compare the SNR, scan time and the spectral patterns in different brain regions in normal volunteers. Materials and Methods : Localized $^1H$ MR spectroscopy ($^1H$ MRS) was performed in a total of 10 normal volunteers (age; 20-45 years) with spectral parameters adjusted by the autoprescan routine (PROBE package). In all volunteers, MRS was performed in a three times using conventional MRS (Signa Horizon) with 1 channel coil and upgraded MRS (Echospeed plus with EXCITE) with both 1 channel and 8 channel coil. Using these three different machines and coils, SNRs of the spectra in both phantom and volunteers and (pre)scan time of MRS were compared. Two regions of the human brain (basal ganglia and deep white matter) were examined and relative metabolite ratios (NAA/Cr, Cho/Cr, and mI/Cr ratios) were measured in all volunteers. For all spectra, a STEAM localization sequence with three-pulse CHESS $H_2O$ suppression was used, with the following acquisition parameters: TR=3.0/2.0 sec, TE=30 msec, TM=13.7 msec, SW=2500 Hz, SI=2048 pts, AVG : 64/128, and NEX=2/8 (Signa/Echospeed). Results : The SNR was about over $30\%$ higher in Echospeed machine and time for prescan and scan was almost same in different machines and coils. Reliable spectra were obtained on both MRS systems and there were no significant differences in spectral patterns and relative metabolite ratios in two brain regions (p>0.05). Conclusion : Both conventional and new MRI systems are highly reliable and reproducible for $^1H$ MR spectroscopic examinations in human brains and there are no significant differences in applications for $^1H$ MRS between two different MRI systems.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.1
• /
• pp.24-36
• /
• 2002

Background: Bronchial reactivity is known to be a component of airway hyperresponsiveness, a cardinal feature of asthma, with bronchial sensitivity, and is increments in response to induced doses of bronchoconstrictors as manifested by the steepest slope of the dose-response curve. However, there is some controversy regarding methods of measuring bronchial reactivity and clinical impact of such measurements. The purpose of this study was to evaluate the clinical significance and assess the clinical use by analyzing the relationship of the bronchial sensitivity, the clinical severity and the changes in pulmonary function with bronchial reactivity. Method: A total of 116 subjects underwent a methacholine bronchial provocation test. They were divided into 3 groups : mild intermittent, mild persistent, moderate and cough asthma. Severe patients were excluded. Methacholine PC20 was determined from the log dose-response curve and PC40 was determined by one more dose inhalation after PC20. The steepest slope of log dose-response curve, connecting PC20 with PC40, was used to calculate the bronchial reactivity. Body plethysmography and a single breath for the DLCO were done in 43 subjects before and after methacholine test. Results: The average bronchial reactivity was 38.0 in the mild intermittent group, 49.8 in the mild persistent group, 61.0 in the moderate group, and 41.1 in the cough asthma group. There was a weak negative correlation between PC20 and bronchial reactivity. A heightened bronchial reactivity tends to produce an increased clinical severity in patients with a similar bronchial sensitivity and basal spirometric pulmonary function. There were significant correlations between the bronchial reactivity and the initial pulmonary function before the methacholine test in the order of sGaw, Raw, $FEV_1$/FVC, MMFR. There were no correlations between the bronchial sensitivity and the % change in the pulmonary function parameters after the methacholine test. However, there were significant correlations between the bronchial reactivity and the PEF, $FEV_1$, DLCO. Conclusion: There was weak significant negative correlation between the bronchial reactivity and the bronchial sensitivity, and the bronchial reactivity closely reflected the severity of the asthma. Accordingly, measuring both the bronchial sensitivity and the bronchial reactivity can be of assistance in assessing of the ongoing disease severity and in monitoring the effect of therapy.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.4
• /
• pp.329-335
• /
• 2004

Background : The Sequential Organ Failure Assessment (SOFA) score can help to assess organ failure over time and is useful to evaluate morbidity. The aim of this study is to evaluate the performance of SOFA score as a descriptor of multiple organ failure in critically ill patients in a local unit hospital, and to compare with APACHE III scoring system. Methods : This study was carried out prospectively. A total of ninety one patients were included who admitted to the medical intensive care unit (ICU) in Chuncheon Sacred Heart Hospital from May 1 through June 30, 2000. We excluded patients with a length of stay in the ICU less than 2 days following scheduled procedure, admissions for ECG monitoring, other department and patients transferred to other hospital. The SOFA score and APACHE III score were calculated on admission and then consecutively every 24 hours until ICU discharge. Results : The ICU mortality rate was 20%. The non-survivors had a higher SOFA score within 24 hours after admission. The number of organ failure was associated with increased mortality. The evaluation of a subgroup of 74 patients who stayed in the ICU for at least 48 hours showed that survivors and non-survivors followed a different course. In this subgroup, the total SOFA score increased in 81% of the non-survivors but in only 21% of the survivors. Conversely, the total SOFA score decreased in 48% of the survivors compared with 6% of the non-survivors. The non-survivors also had a higher APACHE III score within 24 hours and there was a correlation between SOFA score and APACHE III score. Conclusion : The SOFA score is a simple, but effective method to assess organ failure and to predict mortality in critically ill patients. Regular and repeated scoring enables patient's condition and clinical course to be monitored and better understood. The SOFA score well correlates with APACHE III score.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.141-149
• /
• 2018

In this study, compacting, passing performance, segregation resistance and rheological properties were tested to improve the stability of fresh concrete in the production and construction of self-compacting concrete (SCC) using hollow glass powder(GB). As a result, T50 reaching time was shortened up to amount of GB $2.0kg/m^3$. The compacting according to the amount of GB was improved by ball bearing effect of GB. However, T50 reaching time was slightly increased at $4.0kg/m^3$. In the case of passing performance, the result showed that plain was Class 1, GB $0.5{\sim}2.0kg/m^3$ was Class 0, GB $4.0kg/m^3$ was Class 1. Therefore, the passing performance was improved with 'No blocking' up to amount of GB $2.0kg/m^3$. Passing performance Block step (PJ) number by J-ring method was also best at GB $1.0kg/m^3$. In the case of segregation resistance according to the amount of GB, dynamic segregation resistance was increased compared to plain regardless of the amount of GB. And static segregation resistance showed 2.5% of segregation rate at GB $1.0kg/m^3$. Therefore, it was greatly improved compared to plain (12.5%). In the case of rheology property according to the amount of GB, plastic consistency by increasing of GB content didn't show big difference. However, yield stress by increasing of GB content was decreased with GB $1.0kg/m^3$. In conclusion, GB $1.0kg/m^3$ was effective for improvement of compacting, passing performance and yield stress. Also, it will be useful for stability of SCC by improving segregation.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.145-152
• /
• 2006

The purpose of this study was to evaluate electroless plating as a method of increasing the diameter of an orthodontic wire in comparison with eletroplating. After pretreatment plating of the 0.016 inch stainless steel orthodontic wire, electroless plating was performed at $90^{\circ}C$ until the diameter of the wire was increased to 0.018 inch. During the process of electroless plating, the diameter of the wire was measured every 5 minutes to examine the increasing ratio of the wire's diameter per time unit. And to examine the uniformity, the diameter at 3 points on the electroless-plated orthodontic wire was measured. An X-ray diffraction test for analyzing the nature of the plated metal and a 3-point bending test for analyzing the physical property were performed. The electroless-plated wire group showed a increased tendency for stiffness, yield strength, and ultimate strength than the electroplated wire group. And there was a statistically significant difference between the two groups for stiffness and ultimate strength. In the electroless-plated wire group, the increasing ratio of the diameter was $0.00461{\pm}0.00003mm/5min$ (0.00092 mm/min). In the electroplated wire group, it was $0.00821{\pm}0.00015mm/min$. The results of the uniformity test showed a tendency for uniformity in both the plating methods. The results of this study suggest that electroless plating of the wire is closer to the ready-made wire than electroplating wire in terms of the physical property. However, the length of plating time needs further consideration for the clinical application of electroless plating.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1353-1360
• /
• 2011

This study was performed to investigate the antimicrobial effects against food-borne pathogens and antioxidant activity of Rhododendron brachycarpum ethanol-extract. The antimicrobial activity of the extract was determined using a paper disc-diffusion method, and the diameter of the clear zone was measured. The diameter of the clear zone in the presence of 10 mg of extract was maximal against Bacillus cereus among the three tested Gram-positive bacteria and against Escherichia coli O157:H7 among the five tested Gram-negative bacteria. Analysis of the minimum inhibitory concentration (MIC) showed that the extract exhibited a similar efficacy as that of sorbic acid, a well-known chemical preservative. The growth inhibitory effects of the extract at concentrations of 250, 500, 1,000, and 2,000 mg/L on food-borne pathogens were determined against Staphylococcus aureus, Listeria monocytogenes, Salmonella Typhimurium, and Escherichia coli O157:H7. Growth of the microorganisms was not affected by the extract at concentrations up to 250 mg/L, but it was significantly (p<0.05) inhibited by the extract at concentrations higher than 1,000 mg/L. The antioxidant effects of the extract were examined via measurement of DPPH radical scavenging activity, inhibition of reactive oxygen species (ROS) generation using fluorescent dichlorofluorescien (DCF) assay, and prevention of peroxyl radical- and hydroxyl radical-induced supercoiled DNA breakage. The $IC_{50}$ of the extract for DPPH radical scavenging activity was about half that of ${\alpha}$-tocopherol, which was used as a positive control. DCF fluorescence intensity decreased as the concentration of the extract increased, demonstrating that ROS generation was inhibited in a concentration-dependent manner. The ROS inhibitory effect of the extract was higher than that of ascorbic acid. The extract prevented supercoiled DNA strand breakage induced by peroxyl radical and hydroxyl radical. Thus, the results of the present study demonstrate that the extract exhibits antimicrobial effects against food-borne pathogens as well as potent antioxidant capacity, suggesting that R. brachycarpum could be used as a natural antibacterial agent and effective antioxidant in food.

• Journal of Chest Surgery
• /
• v.35 no.4
• /
• pp.267-273
• /
• 2002

Background: We performed a phase IV clinical trial to examine the usefulness of a continuous infusion of nicardipine hydrochloride to control hypertension in patients with acute aortic dissection. material and Method: Systolic/diastolic blood pressure, and heart rate were monitored before and after the intravenous administration of nicardipine in 31 patients with aortic diseases. The period of nicardipine administration in each patient was from 3 to 14 days. Efficacy was evaluated by determining the average amount of blood pressure reduction on the 3rd day of drug administration. The dosage of another antihypertensive agent was slowly tapered down, and ultimately replaced by the test drug. Result: 28 patients were diagnosed as acute aortic dissection, 2 patients as rupture of the aortic arch aneurysm, and 1 patient as traumatic aortic rupture. Mean age was 53.9 $\pm$ 14.9(29~89) years, and 21 patients(67.7%) were male. 14 patients(32.3%) had complications associated with underlying aortic disease: aortic insufficiency in 7, hemopericardium in 6, acute renal failure in 1, paraplegia in 1, lower extremity ischemia in 1, and hemothorax in 1. The time needed to reach the target blood pressure was within 15 minutes in 16, from 15 to 30 minutes in 10, from 30 to 45 minutes in 3 and from 45 to 60 minutes in 2, and their baseline average systolic, diastolic, and mean arterial blood pressures(mmHg) were 147$\pm$23, 82.3$\pm$ 18.6, and 104 $\pm$ 18, respectively. Average systolic, diastolic, and mean arterial blood pressures(mmHg) on the third day of nicardipine infusion were 119$\pm$ 12, 69$\pm$9, and 86$\pm$8, and they all showed statistically significant decrease(p<0.05). The average systolic, diastolic, and mean arterial blood pressure(mmHg) after the discontinuation of the nicardipine infusion were 119 $\pm$ 15, 71 $\pm$ 14, and 86$\pm$ 13, respectively. No significant difference was observed between the average pressures measured on the third day and those measured after the discontinuation of the nicardipine infusion, and no definite side effects were observed during the study period. Conclusion: Nicardipine hydrochloride was both effective and safe at controlling blood pressure in patients with acute aortic dissection.

• Journal of Chest Surgery
• /
• v.41 no.5
• /
• pp.563-567
• /
• 2008

Background: The histomorphological properties of the left anterior desecending artery (LAD), the left internal thoracic arteries (LITA), the radial arteries (RA) and the intercostal arteries (ICA) were studied for their use as a conduit for coronary artery bypass grafting (CABG), and we compared them with each other. Material and Method: All the vessels were harvested from nineteen cadavers (17 males and 2 females). The mid-portion of the LAD, the mid-portion of the LITA, the distal RA and the mid-portion of the 5th ICA were obtained. All of them were stained with hematoxylin-eosin and with Van Gieson's elastin stain. The morphological characteristics were examined and the thicknesses of the intima and media (I/M ratio: the intima to media ratio) were compared using one-way ANOVA tests. Result: The mean age of the cadavers was $61.5{\pm}9.6$ years. The LITA and ICA were elastic arteries, and the LAD and RA were muscular arteries. The I/M ratio showed statistically significant differences: $0.07{\pm}0.03$ in the LITA, $0.16{\pm}0.11$ in the ICA, $0.45{\pm}0.29$ in the RA and $0.93{\pm}0.52$ in the LAD, respectively. Conclusion: This study showed that the degrees of intimal hyperplasia of the CA and the various conduits for CABG were different significantly. The ICA was found to have relatively favorable characteristics as a coronary by pass conduit, but its suitability for clinical use is a challenging issue.