• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.440-446
• /
• 2008

To manufacture the MLCC with X7R for high voltage stability, $BaTiO_3-MgO-MnO_2-Y_2O_3$ with $(Ba_{0.4}Ca_{0.6})SiO_3$ glass frit was formulated. Based on this composition, the addition of $Er_2O_3$ showed that TCC(Temperature Coefficient Capacitance) at $85^{\circ}C$ was improved from 5 % to ${\sim}0\;%$, but the dielectric constant and IR (Insulation Resistance) were decreased. The glass frit improved the dielectric constant and IR, so the appropriate contents of $Er_2O_3$ and glass frit were 0.6 mol% and 1 wt%, respectively. It showed that the dielectric constant and RC constant were 2,550 and 2,000 (${\Omega}F$), respectively in the sintering condition at $1250^{\circ}C$ in PO2 $10^{-7}$ Mpa. The MLCC with $3.2{\times}1.6$ (mm) size and $1\;{\mu}F$ was also suited for X7R with the above composition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.2
• /
• pp.131-136
• /
• 2001

Relative growth and composition of larval development stages in brood pouch of the melania snail, Semisulcospira libertina libertina were investigated based on monthly field samples for a year. Total number of specimens examined was 1,200. Size values (mean$\pm$S. D.) of shell height (SH), shell diameter (SD), total weight (TW), meat weight (MW) and shell weight (SW) were $15.96\pm3.41\;mm$, $7.82\pm1.38\;mm$, $0.55\pm0.31\;g$, $0.24\pm0.15\;g$ and $0.39\pm0.23\;g$, respectively, Water temperature (WT) of the sampling site varied from $1.3^{\circ}C\;to\;22.5^{\circ}C$. Relative growth equations among SH, SD, TW, MW and SW of S. libertina libertina specimens pooled were as follows: SD=0,3583SH+2.1648 $(R^2=0.8391)$, $TW=0.0005SH^{2.4853}\;(R^2=0.8391)$,$MW:\;0.0005SH^{2.849}\;(R^2= 0.8391)$ and $SW=0.0004SH^{2.3798}\;(R^2=0.7057)$. Female S. libertina libertina had larvae in its brood pouch throughout the year, Average number of larvae in the brood pouch varied from $91\pm33(July)$ to $396\pm174\;(November)$, decreasing in spring and increasing in autumn. In the monthly composition of larval stage in the brood pouch, trochophore, pre-veliger, veliger and juvenile showed maximum as $66.7\%$ in May, $70.7\%$ in November, $60.9\%$ in February and $13.9\%$ in January, respectively. Percent composition of the juveniles decreased in spring and autumn. In conclusion, S. libertina libertina is likely to have two main parturition periods, March to May and September and October.

• Fisheries and Aquatic Sciences
• /
• v.4 no.4
• /
• pp.208-218
• /
• 2001

We have investigated the gonad index (GI), gonadal development, reproductive cycle, first sexual maturity, sex ratio, the number of spawned eggs and spawning frequency of the Manila clam, Ruditapes philippinarum. Samples were collected from the intertidal zone of Komso Bay, Korea from January to December in 1999. Monthly changes in the gonad index (GI) and condition index showed a similar pattern in the reproductive cycle. The spawning period was once a year between early June and early October, there was a spawning peak between July and August when seawater temperature was over $20^{\circ}C$. The reproductive cycle of this species can be categorized into five successive stages; early active (February to March), late active (April to May), ripe (April to August), partially spawned (June to October), and spent/inactive stage (August to March). Percentages of first sexual maturity of female and male clams of l5.1-20.0mm in shell length were $56.3\%$ and $60.0\%$, respectively, and $100\%$ for the clams >25. mm. The sex ratio of individuals >15.1 mm in shell length was about 1:1 $(\chi^2= 0.02,\;p>0.05)$. Number of the eggs released from each clam by the induction increased as the size of clam in terms of shell length increased. Mean number of the eggs from the second induction of the spawning was $75.35-84.30\%$ $(average\;79.81\%)$ of the number of the eggs released in the first spawning. Our data indicated that R. philippinarum in Komso Bay has one major spawning peak with over two minor spawning, and the interval of each spawning was estimated to be approximately 15-17 (average 16.5) days.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.5
• /
• pp.74-84
• /
• 1996

Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. For developing a program to analyze the dynamic response of an axisymmetric shell in this study, the material nonlinearity effect on the dynamic response was formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion was numerically solved by a central difference scheme. A complete finite element program has been developed and the results obtained by it are compared with those in the references 1 and 2. The results are in good agreement with each other. As a case study of its application, the developed program was applied to a dynamic response analysis of a nuclear reinforced concrete containment structure. The results obtained from the' numerical examples are summarized as follows : 1. The dynamic magnification factor of the displacement and the stress were unrelated with the concrete strength. 2. As shown by the results that the displacement dynamic magnification factor were form 1.7 to 2.3 and the stress dynamic magnification factor from 1.8 to 2.5, the dynamic magnification factor of stress were larger than that of displacement. 3. The dynamic magnification factor of stress on the exterior surface was larger than that on the interior surface of the structure.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.3
• /
• pp.149-163
• /
• 2011

Hanjisa(Korean paper yarn), a new material made from the traditional Korean paper, has been developed through local R&D efforts, reflecting the current trend highly valuing environmental friendly. This new material is considered suitable for the 21C lifestyle and culture pursuing improved quality of human life and the environment. Therefore, this study aims to widely make known the originality and functions of the environmentally friendly Korean paper yarn, as well as to increase its commercial value. Furthermore, a new category of apparel design is presented by studying painting dyeing based on transformational tuck techniques and wax resist dyeing with formative features of repeated lines and rhythms of shells in order to implement three-dimensional and decorative artistic expressions. The texture of the Korean cotton paper yarn was particularly suitable to employ tuck and dyeing techniques Which express formative features of shell. Also, the material was useful for expressing the three-dimensional feelings with repeated curves and cross sections of shells. Moreover, paraffin resist dyeing and stitch techniques were used in order to avoid monotony and the images of shells visually materialized. Through the results stated above, this study could explore how to overcome obstacles to globalization of the Korean modern apparel such as its uniqueness, limit of materials or absense of internationality by applying modern design to the Korean paper fabrics. In the future, it is expected that more manufactures could produce and supply the new materials so as to make widely known the originality of the Korean paper fabrics and develop the material into a popular organic product fitting the modern lifestyle.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.3
• /
• pp.72-82
• /
• 1997

In all inelastic deformations time rate effects are always present to some degree. Whether or not their exclusion has a significant influence on the prediction of the material behaviour depends upon several factors. In the study of structural components under static loading conditions at normal temperature it is accepted that time rate effects are generally not important. However metals, especially under high temperatures, exhibit simultaneously the phenomena of creep and viscoplasticity. In this study, elastoplastic and elasto-viscoplastic models include nonlinear geometrical effects were developed and several numerical examples are also included to verify the computer programming work developed here in this work. Comparisons of the calculated results, for the elasto-viscoplastic analysis of an internally pressurised thick cylinder under plane strain condition, have shown that the model yields excellent results. The results obtained from the numerical examples for an elasto-viscoplastic analysis of the Nuclear Reinforced Concrete Containment Structure(NRCCS) subjected to an incrementally applied internal pressure were summarized as follows : 1. The steady state hoop stress distribution along the shell layer of dome and dome wall junction part of NRCCS were linearly behave and the stress in interior surfaces was larger than that in exterior. 2.However in the upper part of the wall of NRCCS the steady state hoop stress in creased linearly from its inner to outer surfaces, being the exact reverse to the previous case of dome/dome-wall junction part. 3.At the lower part of wall of NRCCS, the linear change of steady state hoop stress along its wall layer began to disturb above a certain level of load increase.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.15-20
• /
• 2011

This study carried out a series of experiments involving impact tests (Drop Weight type & Charpy type with a standard specimen and newly designed I-type specimen), hardness tests, and fracture surface observations of French-made roll shell steel (F), abnormal roll shell steel (M), reheated roll shell steel (R), and S25C steel under heat treatment conditiAn experimental study was carried out to study the solid-liquid mixture upward hydraulic transport of solid particles in vertical and inclined annuli with a rotating inner cylinder. The lift forces acting on a fluidized particle play a central role in many important applications such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport, the cleaning of particles from surfaces, etc. In this study a clear acrylic pipe was used to observe the movement of solid particles. Annular velocities varied from 0.4 to 1.2 m/s. The effect of the annulus inclination and drill pipe rotation on the carrying capacity of a drilling fluid, particle rising velocity, and pressure drop in a slim hole annulus were measured for fully-developed flows of water and aqueous solutions of CMC (sodium carboxymethyl cellulose) and bentonite. The rotation of the inner cylinder was efficient at carrying particles to some degree. For a higher particle volume concentration, the hydraulic pressure loss of the mixture flow increased because of the friction between the wall and solids or between solids.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.111-117
• /
• 2001

Screening of fifteen bivoltine silkworm breeds of Bombyx mori Linn at a temperature of $31{\pm}1^{\circ}C$ and relative humidity of 85${\pm}$5% resulted in the identification of eight thermo-tolerant breeds. The survival and cocoon shell ratio of the tolerant breeds ranged from 72.7 to 78.7% and 20.0 to 20.1% respectively. The tolerant breeds comprised of four oval breeds and four dumb-bell breeds. Eight foundation crosses prepared by crossing the oval and dumb-bell parents among themselves were screened at a temperature of $31{\pm}1^{\circ}C$ and relative humidity of 85{\pm}5%. The performance of the foundation crosses on 11 economic characters were analysed by employing Multipie Trait Evaluation Index method. Four foundation crosses which scored average index value > 50 were selected as breeding parents and breeding initiated for the evolution of thermo-tolerant bivoltine silkworm breeds. The methodology and the results of the foundation crosses reared both at 31{\pm}1$^{\circ}C$ and at $25{\pm}1^{\circ}C$ temperatures, are discussed.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.559-564
• /
• 2023

It is known that change in the bone strength of cortical bone constituting the outer shell of long bones such as the tibia or radius due to aging and osteoporosis is a risk factor for fracture. In this study, the group velocity of time-reversed Lamb waves generated in tibial cortical bone in vivo was measured using a time reversal method, and the correlations of the group velocity with the cortical bone thickness (cTh) and cortical bone mineral density (cBMD) closely related to the bone strength were investigated. It was found that the group velocity of time-reversed Lamb waves measured in the right tibia of 7 subjects showed a very high correlation, r = 0.90 (p < 0.0001), with the cTh and a relatively low correlation, r = 0.69 (p < 0.0001), with the cBMD. A limitation of this in vivo study is that the group velocity of time-reversed Lamb waves was measured for a normal group consisting of only 7 healthy adults. In the future, if the clinical usefulness of the time-reversed Lamb wave is demonstrated by follow-up studies on normal and osteoporotic groups consisting of a large number of healthy adults and osteoporotic patients, respectively, it is expected to improve the reliability of quantitative ultrasound technology for osteoporosis diagnosis. In addition, it is necessary to expand the skeletal site for measuring the group velocity of time-reversed Lamb waves not only to the tibia but also to the femur or radius.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.429-435
• /
• 2015

A bellows is an important temperature control component in a Joule-Thomson micro-cryocooler. It is designed using a very thin shell, and the inside of the bellows is filled with nitrogen gas. The bellows is made of a nickel-cobalt alloy that maintains its strength and elastic properties in a wide range of temperatures from cryogenic to $300^{\circ}C$. The pressure of the gas and the volume within the bellows vary according to the temperature of the gas. As a result, the bellows contracts or expands in the axial direction like a spring. To explore this phenomenon, the deformation of the bellows and its internal volume must be calculated iteratively under a modified pressure until the state equation of the gas is satisfied at a given temperature. In this paper, the modified Benedict-Webb-Rubin state equation is adopted to describe the temperature-volume-pressure relations of the gas. Experiments were performed to validate the proposed method. The results of a numerical analysis and the experiments showed good agreement.