• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.16 no.1
• /
• pp.269-283
• /
• 2005

Research and Development projects sponsored by the government are one of the main production sectors of academic and research information in domestic area. The access control and information service of R&D outcomes should be considered as a critical factor of nation-wide knowledge-based IS management. This study focused on the practical utilities of three IPR legislations of the government projects and analyzed if they are good enough to support the information service in recent digital network environment. Some suggestions in different perspectives were provided for the improvement of the existed IPR legislation.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.225-230
• /
• 1992

In this paper, a new learning fuzzy logic controller(LFLC) is presented. The proposed controller is composed of the main control part and the learning part. The main control part is a fuzzy logic controller(FLC) based on linguistic rules and fuzzy inference. For the learning part, artificial neural network(ANN) is added to FLC so that the controller may adapt to unknown plant and environment. According to the output values of the ANN part, which is learned using error back-propagation algorithm, scale factors of the FLC part are determined. These scale factors transfer the range of values of input variables into corresponding universe of discourse in the FLC part in order to achieve good performance. The effectiveness of the proposed control strategy has been demonstrated through simulations involving the control of an unknown robot manipulator with load disturbance.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.18-20
• /
• 2008

An electrical balance of plant(EBOP) of a 600kW molten carbonate fuelcell (MCFC) has to transit from grid-connected(GC) mode to grid-independent(GI) mode when a grid is in a fault conditions. A minimum transition time is limited by four cycle for a 600kW MCFC to ride through a grid fault. In this paper, we propose a control algorithm of a 600kW EBOP for a MCFC system. The EBOP has three operation modes, i.e., GC mode, GI mode, and grid-synchronized(GS) mode. The EBOP controls output currents in a GC mode and regulates output voltages in GI or GS mode. GS mode is defined as an interface between GC mode and GI mode to make a mode transition smooth, i.e., limitation of inrush currents, regulation of output voltages within ANSI standard. Simulations and experiments carried out to verify the effectiveness of the proposed control algorithm.

• Journal of Technology Innovation
• /
• v.20 no.3
• /
• pp.29-55
• /
• 2012

In order to successfully adopt and implement the Balanced Scorecard(BSC), firms need to respond adequately to the rapid changes of today's business environment and consider the growing importance of non financial factors in the business activities such as intangible assets(R&D expenditure, patent, goodwill, etc.). Our primary focus throughout this paper is on developing Key Performance Index(KPI) of BSC for R&D expenditure activities. In this study, we have developed and named PEI(Patent Efficiency Index),which is the KPI for R&D expenditure by focusing on the efficiency of a patent that is the output from the R&D expenditures. Secondarily, we have attempted to address the solution for the current problems of the traditional R&D performance measurement by using our developed PEI and examine the usefulness and effectiveness of the newly developed our PEI. According to the empirical test results, we find that the PEI is positively associated with ROA and Tobin's Q, respectively and show that our developed PEI is more effective and accurate than the traditional R&D performance measurement as a business performance measurement. Furthermore, these findings proves that we can measure and evaluate how efficiently the firms perform the R&D activities and shows that the PEI can be a critical index for evaluating firm's business performance related to the R&D expenditures.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.101-108
• /
• 2011

Understanding the exhaust gas recirculation (EGR) cooler fouling in diesel engine is important factor in the durability characteristic of a EGR system. We develope a test rig and PM feeder using carbon black to examine the effect of fouling on EGR cooler devices those were consisted of flat and shell & tube type. The EGR cooler fouling process is a complex interaction involving heat exchanger shape, boundary condition, constitutes, chemistry and operating mode. As the soot deposited to EGR cooler, these formed a thin deposit layer that was less heat exchange than the fresh status of tube enclosing the exhaust gas, resulting in lower heat exchange effectiveness in both type coolers. But these deposits caused different results in pressure drop, it is increased in flat type, but decreased in Shell & tube type of EGR cooler. A cause was estimated from a change of the flow structure and a decrease of contact area as the EGR cooler fouling.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.150-162
• /
• 2016

This study empirically analyze the effect of government R&D investment to find out whether it complements or substitutes for the firm R&D. In order to do it panel data set was constructed for the period of three years from 2012 to 2014 based on the number of 1301 data by utilizing national technology information service(NTIS) and publicly announced financial statement. Analysis was implemented in consideration of size of the firm(large corporation, small and medium sized firm) of which sample was obtained from only listed company. The result of two-way fixed effect model and two-way random effect model is as follows. In case of large corporation, government R&D investment has an effect of substitute for the company's R&D on the other hand, small and medium sized firm shows an complementary effect. It verifies that current R&D policy is appropriate. Therefore government's direct subsidy is expected to be successful to fertilize firm's innovation by allocating government R&D budget efficiently.

• Journal of the Korean Society of Combustion
• /
• v.21 no.4
• /
• pp.1-5
• /
• 2016

The aim of this study is to compare the effectiveness of turbo chargers on engines for off-road use when combined with WGT and VGT technologies. The effectiveness of turbo chargers was measured and performance was compared using a functional model. Exhaust characteristics were compared using WGT and VGT technologies through a gas analyzer. Results showed VGT technology was more effective at high RPM compared to WGT technology. When it came to maximising turbo performance, VGT was more effective than WGT in every test. WGT and VGT produced similar exhaust NOx levels, whereas the VGT was more effective on the PM.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.31-39
• /
• 2023

The purpose of this study is to propose a scientific performance evaluation framework for measuring and managing the overall outcome of complex types of projects that are linked to public demand-based commercialization, such as information system projects and public procurement, in integrated national R&D projects. In the case of integrated national R&D projects that involve multiple research institutes to form a single final product, and in the case of demand-based demonstration and commercialization of the project results, the existing evaluation system that evaluates performance based on the short-term outputs of the detailed tasks comprising the R&D project has limitations in evaluating the mid- and long-term effects and practicality of the integrated research products. (Moreover, as the paradigm of national R&D projects is changing to a mission-oriented one that emphasizes efficiency, there is a need to change the performance evaluation of national R&D projects to focus on the effectiveness and practicality of the results.) In this study, we propose a performance evaluation framework from a structural perspective to evaluate the completeness of each national R&D project from a practical perspective, such as its effectiveness, beyond simple short-term output, by utilizing the Hourglass model. In particular, it presents an integrated performance evaluation framework that links the top-down and bottom-up approaches leading to Tool-System-Service-Effect according to the structure of R&D projects. By applying the proposed detailed evaluation indicators and performance evaluation frame to actual national R&D projects, the validity of the indicators and the effectiveness of the proposed performance evaluation frame were verified, and these results are expected to provide academic, policy, and industrial implications for the performance evaluation system of national R&D projects that emphasize efficiency in the future.

• Industry Promotion Research
• /
• v.8 no.2
• /
• pp.45-59
• /
• 2023

In response to the increasing global competition for technological supremacy to address climate change, it is crucial to develop workforce development programs in the field of climate technology to accumulate the national technological capabilities. However, these programs are rarely monitored and evaluated, and research related to monitoring and evaluation in the field of climate technology workforce development is limited. Therefore, this study aimed to investigate the impact of workforce development programs in hydrogen energy and policy sectors on students' R&D capabilities and career aspirations in these sectors. The survey and focus group interviews with beneficiaries revealed that individual students' R&D capabilities and career confidence improved, and group-level R&D capabilities were also enhanced, and students felt greater appreciation on the significance of climate technology. The results of this study suggest that the necessary R&D capabilities to train R&D workforce in climate technology have been developed, but more measures are required to promote career development in this field.

• Journal of Technology Innovation
• /
• v.24 no.1
• /
• pp.1-24
• /
• 2016

This study examined 142 electronic components, video, audio, and communications equipment manufacturers (KSIC 32) out of all the SMEs that responded to the Survey on Technology of the Small and Medium Enterprises in both 2005 and 2007 and empirically analyzed how the external resources utilization and the absorptive capability affected the management and the innovation performance in two years as well as how the absorptive capability moderated these relationships. According to the results of analysis, the external resources utilization, as measured by the technology collaboration and the governments R&D subsidies, did not have a significant impact on performance whereas R&D investment showed a positive (+) influence on the sales and R&D personnel ratio, negative (-). On the other hand, the moderating effect of absorptive capability varied by measurement method and independent variables. That is, when a technology collaboration takes place, the performance improved with the increase of R&D investment but R&D personnel ration had an opposite effect. The companies whose performance improved as the government R&D subsidies increase are those with low R&D investment or high R&D personnel ratio. These results demonstrate that the SME's external resources utilization cannot replace the internal and that the absorptive capability needs to be accumulated to maximize the effectiveness of external resources utilization. Also, the technology collaboration requires SME's aggressive investment in R&D and the government R&D subsidies turn out to be more helpful for the companies that already have the R&D personnel but have been unable to develop their own technology due to insufficient funds. This study has limitations in that it was conducted within the limited industry categories and samples, but has overcome those of the existing researches by identifying causal relationships through the use of longitudinal data.