• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.2
• /
• pp.91-97
• /
• 2009

The productivity and the precision machining are the major concerns of the machine tools, and the importance of those features will be even more emphasized with the needs of the modern industries. In this paper the dynamic properties of a lathe have been investigated through the frequency analysis test and the computer simulation to minimize the transmission of vibration generated during the machining process. The modifications have been applied to the original structure to suppress the vibration transmission and further for the structure to achieve less vibrations and higher precision machining. The result shows that the machine can have much less vibrations with simple design alterations for minor expenses, the result can also be readily applied to many similar machines for improved stability.

• Laser Solutions
• /
• v.11 no.4
• /
• pp.21-28
• /
• 2008

Remote Laser welding technology for manufacturing automotive body is studied. Laser welding and industrial robot systems are used for the robot based laser welding system. The laser system is used 1.6kW Fiber laser(YLR-1600) of IPG. The robot system is used HX130-02 of Hyundai Heavy Industry(payload : 130kg). The robot based laser welding system is equipped with laser scanner system for remote laser welding. The welding joints of steel plate and steel plate coated with zinc are butt and lapped joints. The quality test of the laser welding are through the observation the shape of bead on plate and cross-section of welding part. During past three years the laser system, 4kW Nd:YAG laser (HL4006D) of Trumpf was used and the robot system, IRB6400R of ABB (payload:120kg) was used. The new laser source, robot and laser scanner system are used to increase the processing speed and to improve the process efficiency. This paper introduces the robot based remote laser welding system to resolve the limited welding speed and accuracy of the conventional laser welding system.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1764-1766
• /
• 1998

One of the most important problems in the development of AC PDP is to make long life and more stable panels. It is well known that the life time of a panel strongly depends on the sputtering-resistant property of the protecting layer such as MgO. However, the sputtering rate is so low that it is very difficult to measure the sputtering-resistant property of MgO. This paper describes a high speed measurement technique to test the sputtering-resistant property of MgO thin film by the R.F. magnetron sputtering. In this case the MgO sample has been used as a target of sputtering process. Moreover, the MgO surface changed by ion-bombarding sputtering are also discussed with SEM photoes.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.103-110
• /
• 2014

Sisal fiber, an agricultural resource abundantly available in china, has been used as raw material to prepare activated carbon with high surface area and huge pore volume by chemical activation with zinc chloride. The orthogonal test was designed to investigate the influence of zinc chloride concentration, impregnation ratio, activation temperature and activation time on preparation of activated carbon. Scanning electron micrograph, Thermo-gravimetric, $N_2$-adsorption isotherm, mathematical models such as t-plot, H-K equation, D-R equation and BJH methods were used to characterize the properties of the prepared carbons and the activation mechanism was discussed. The results showed that $ZnCl_2$ changed the pyrolysis process of sisal fiber. Characteristics of activated carbon are: BET surface area was $1628m^2/g$, total pore volume was $1.316m^3/g$ and ratio of mesopore volume to total pore volume up to 94.3%. These results suggest that sisal fiber is an attractive source to prepare mesoporous high-capacity activated carbon by chemical activation with zinc chloride.

• Management & Information Systems Review
• /
• v.27
• /
• pp.31-52
• /
• 2008

Intangible Assets are more important determinants of firm value than others in a digital information-based economy(Lev, 2001). Prior research reveals that investments in intangible assets such as R&D and advertising expenditures are associated with firm value. This paper examines the effects of the corporate investments in the information technologies(IT) on stock return and economic goodwill. The sample consists of 152 firms listed on the Korean stock market in 2002. To test hypothesis We employed multiple regression models. Results are as follows; First, IT environment, IT process, and IT human resource are positively associated with firm's IT value. Second, firm's IT value is positively correlated with firm's economic goodwill. Third, firm's IT value is positively correlated with firm's stock return. These results suggest that the investments related with IT are effective in cultivating firm's value and Stock investors can make the best use of firm's announcements related with IT value. Thus the authorities concerned need to expand the public announcements related IT value.

• Journal of the Korean Ceramic Society
• /
• v.54 no.5
• /
• pp.380-387
• /
• 2017

In this study, unstable CaO was converted into a stable Ca compound by using carbonation in a circulating fluidized bed boiler of fly ash to confirm material usability as cement admixture; also undertaken was carbonation test and mortar to examine chemical and physical change by measuring absorption rate and compressive strength. To investigate the chemical properties of circulating fluidized bed boiler fly ash, XRD and TG-DTA were used to determine how the properties of the reaction product change quantitatively during carbonation. In order to stabilize CaO, carbonation of CaO is considered to be the most desirable process. This is because $CaCO_3$, which is a Ca compound, was produced by carbonate reaction of unstable CaO, and decrease of the absorption rate and improvement of the compressive strength were observed when the carbonated fly ash was replaced with cement.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.723-726
• /
• 2005

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.29-34
• /
• 2017

Increased demand for parts with micro-pattern structure made of metals, ceramics, and composites in various fields such as medical ultrasonic sensors, CT collimators, and ultra-small actuator parts. Micro powder injection molding (PIM) is a technology for manufacturing micro size, high volume, complex, precision, net-shape components from either metal or ceramic powder. In the present study, a standard mold with a variable insert core capable of producing various micro patterns was investigated. An injection molding test was performed on a standard mold using a line type micro-pattern core having an aspect ratio of 2, a slenderness ratio of 70, a pattern size of $200{\mu}m$, and a pattern spacing of $150{\mu}m$. During the filling process, the deformation of the mold with large aspect ratio and slenderness ratio was analyzed by the experiment and the numerical simulation according to the position of the gate. We proposed a mold structure that minimizes mold deformation by gate modification and enables uniform pattern filling behavior.

• Transactions of Materials Processing
• /
• v.29 no.6
• /
• pp.356-361
• /
• 2020

In general, the drawing process is performed in a multi-pass to meet the required shape and cross section. In the drawn material, the surface strain is relatively higher than the center due to the direct contact with the die. Therefore, a non-uniform strain distribution appears in the surface of the material where the strain is concentrated and the center having a relatively low strain, thus it is difficult to predict the strain in the drawn material. In this study, the non-uniform strain distribution was evaluated using a finite element analysis and the non-uniform strain distribution model based on the upper bound method. In addition, the relationship between the hardness and the strain was established through a simple compression test to evaluate the distribution of the strain in the experimentally multi-pass drawn bar.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.465-472
• /
• 2016

A study was carried out to investigate typical features of natural supercavitation generated behind axisymmetric bodies such as disk and cone shaped cavitators. Main focuses of the study were to observe formation process of the supercavity and to measure drag forces acting on cavitators. Experiments were carried out at the cavitation tunnel of the Chungnam National University (CNU-CT), which has a capability to make sufficient flow speed for supercavitation experiments and to remove broken cavity bubbles coming back to the test section. Blockage effects on supercavity dimensions were evaluated and an effort was made to correlate tunnel experiments with unbounded flow. On the basis of experimental and numerical results, geometrical features of supercavities and characteristics of drag forces were examined and their relations were proposed.