• 대한디지털의료영상학회논문지
• /
• 제13권1호
• /
• pp.39-48
• /
• 2011

Uses a Tomographic scan image and Table Object Distance(TOD) price after measuring, uses accuracy and usability of blood vessel diameter(Vessel Diameter) measurement under comparison evaluating boil TOD Calibration. The patient who enforces Prosecuting Attorney abdomen Tomographic scan in the object the superior mesentery artery uses PACS View from abdomen fault image and from blood vessel diameter and the table measures the height until of the blood vessel. Uses Angio Catheter from Angiography(5 Fr.) and enforces is measured from PACS View the height until of the table which and the blood vessel at TOD Calibration price and the size of the superior mesentery artery inputs measures an superior mesentery artery building skill. Catheter Calibration input Agnio Catheter where uses in Angiography the size of the superior mesentery artery at Catheter Calibration price and they measure. Produced an accuracy from monitoring data and comparison evaluated. The statistical program used SPSS. TOD Calibration accuracy was 96.53%, standard deviation is 0.03829. Catheter Calibration accuracy of 92.91%, standard deviation is 0.05085. Represents a statistically significant difference(p = 0). According to age and gender was not statistically significant(p > 0.05). TOD Calibration correlation coefficient R-squared of 88.8%, Catheter Calibration of the R-squared is 75.5%. High accuracy of both methods. Through this study, CT images using the measured distance between the table and the Object, TOD Calibration accuracy higher than two Catheter Calibration was measured. TOD and Catheter Calibration represents a statistically significant difference(p = 0).

• 한국항행학회논문지
• /
• 제17권5호
• /
• pp.560-567
• /
• 2013

본 논문에서는 일반적으로 사용되고 있는 개발 및 분석용 프로그램을 이용하여 시험요구서가 개발되지 않은 ASIC을 대상으로 결함을 검출하는 방법을 제안한다. 시험요구서가 없는 경우, 회로의 동작을 파악하기 힘들어 어떤 칩에서 결함이 발생하였는지 발견하기 어렵다. 따라서 ASIC의 로직 데이터를 분석하여 결함 검출을 위한 시험요구서를 작성하고, 시험요구서에 따라 제작된 Dynamic Pattern 신호를 이용하여 게이트 레벨에서 입출력 핀 신호 제어를 통해 고장진단을 한다. 실험결과 제안된 기법을 비메모리 회로에 적용하여 우수한 결함 검출능력을 확인하였다.

• 한국가스학회지
• /
• 제22권6호
• /
• pp.129-135
• /
• 2018

도시가스배관에 대한 효율적인 안전관리를 위해서 33개 도시가스사로부터 입력된 데이터를 체계적으로 관리하고 분석함으로써, 가스안전관리 관련 대내 외적 업무를 효과적으로 수행하기 위하여 도시가스배관 종합관리시스템을 구축하였다. 시스템에 업로드된 배관정보 데이터는 KGS Code에 명시된 기준에 의해서 위험지수로 표현되고, 이를 통하여 진단우선순위가 도출됨으로써 배관 안전관리가 수행되고 있다. 하지만 위험지수를 선정하는 배점방식이 매우 단순하고 관련 근거도 부족할 뿐만 아니라, 다수의 중복 순위로 인해 진단대상 선정에 대한 신뢰성이 높지 않다. 이에 신뢰도 기반 설계 및 평가법을 기반으로 한 프로그램을 개발하여 합리적으로 위험도 및 위험순위를 도출하였다.

• 과학기술학연구
• /
• 제19권1호
• /
• pp.137-179
• /
• 2019

본 연구는 아직까지는 생소한 초학제적 연구, 특히 시민참여형 초학제적 연구의 기본 성격을 체계적으로 정리하고 일반시민이 참여하는 과학기술지식생산의 방식, 성과물의 성격을 파악하고 정책적 함의를 도출하는 것을 목적으로 한다. 논문의 두 가지 핵심질문 중 첫 번째 질문은 지식의 생산방식에 관한 것으로서 일반시민들과 과학자들이 어떤 방식을 통해 지적인 측면의 공동작업을 하는지 살펴보는 것이며, 두 번째 질문은 초학제적 연구의 결과물에 관한 것으로서 기존 R&D는 논문과 특허 등이 기대되는 주요 성과물이라 할 수 있는데, 초학제적 연구에서는 다른 결과물도 발생하는 지 살펴보는 것이다. 모드 2 논의, 지식의 종류와 학습방식, 과학기술지식이 종종 새로운 사회질서와 함께 만들어진다는 공동생산 논의 등 기존의 연구들을 비판적으로 검토하여 일반시민, 현장종사자들의 입장에서 초학제적 연구의 성격을 밝히고 정책적 함의를 제시한다.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.78-84
• /
• 2020

본 논문에서는 Part I에 소개된 요소모델들을 통합하여 핀틀 추력기 성능 특성을 분석하였다. 성능해석 모델 검증을 위하여 케로신/과산화수소 액체 핀틀 추력기의 실험결과와 비교 분석하였다. 검증한 결과를 바탕으로 핀틀 추력기 내부의 비정상 열유동장의 물리적 특성을 분석하였으며 필름효과를 확인하였다. 또한 추력기의 형상인자와 작동인자가 성능특성에 미치는 영향을 파악하기 위하여 OAT 방법과 scatter plot 방법을 이용해 민감도 분석을 수행하였다. 액적직경, 필름유량, O/F비, 노즐목 직경의 4가지 인자를 이용해 특성속도, 연소실 압력, 비추력의 변화에 대한 영향을 관찰하였다.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.61-70
• /
• 2021

This study aimed to analyze the research trends of the abstract data of ergonomic studies registered in MEDLINE, a medical bibliographic database, using word embedding. Medical-related ergonomic studies mainly focus on work-related musculoskeletal disorders, and there are no studies on the analysis of words as data using natural language processing techniques, such as word embedding. In this study, the abstract data of ergonomic studies were extracted with a program written with selenium and BeutifulSoup modules using python. The word embedding of the abstract data was performed using the word2vec model, after which the data found in the abstract were vectorized. The vectorized data were visualized in two dimensions using t-Distributed Stochastic Neighbor Embedding (t-SNE). The word "ergonomics" and ten of the most frequently used words in the abstract were selected as keywords. The results revealed that the most frequently used words in the abstract of ergonomics studies include "use", "work", and "task". In addition, the t-SNE technique revealed that words, such as "workplace", "design", and "engineering," exhibited the highest relevance to ergonomics. The keywords observed in the abstract of ergonomic studies using t-SNE were classified into four groups. Ergonomics studies registered with MEDLINE have investigated the risk factors associated with workers performing an operation or task using tools, and in this study, ergonomics studies were identified by the relationship between keywords using word embedding. The results of this study will provide useful and diverse insights on future research direction on ergonomic studies.

• 한국콘텐츠학회논문지
• /
• 제21권2호
• /
• pp.641-651
• /
• 2021

슈퍼컴퓨터는 과학, 산업, 국가안보 및 사회현안 해결 등의 다양한 분야에서 중요한 역할을 수행해 왔으며, 빅데이터, AI 등을 활용한 영역에서의 활용이 강화되면서 그 수요는 크게 증가하고 있다. 최근에는 다양한 아키텍처 기반으로 글로벌 엑사스케일 시스템 개발 경쟁이 가속화되고 있어, 머지않은 미래에 엑사스케일 컴퓨팅 시대가 도래할 예정이다. 그러나, 국내 슈퍼컴퓨팅 생태계는 과거 서버산업 쇠퇴로 기반이 유실되었으며, 이를 보완 및 육성하고자 관련 법이 제정되었음에도 그 기능을 원활히 수행하지 못하고 있다. 이에 본 연구에서는 유관 법제도 분석 및 슈퍼컴퓨팅 생태계 현황 분석을 통해 현행 법제도에서의 문제점을 살펴보고, 정부·국가센터·전문센터의 역할 강화, 산업체 지원, 연구결과의 실용화 촉진, 정부 육성시책의 유연성을 수용하고 연관 법제도에서 슈퍼컴퓨팅 연구개발사업의 추진 근거를 마련할 수 있도록 개선사항을 제시한다.

• 공업화학
• /
• 제32권1호
• /
• pp.102-109
• /
• 2021

Recently, an interest in risk calculation methods has been increasing in Korea due to the establishment of classification code for explosive hazardous area on gas facility (KGS CODE GC101), which is based on the international standard of classification of areas - explosive gas atmospheres (IEC 60079-10-1). However, experiments to check for leaks of combustible or toxic gases are very difficult. These experiments can lead to fire, explosion, and toxic poisoning. Therefore, even if someone tries to provide a laboratory for this experiment, it is difficult to install a gas leakage equipment. In this study we find out differences among actual experiments, CFD by using FLACS and calculation based on classification code for explosive hazardous area on gas facility (KGS CODE GC101) by comparing to each other. We develpoed KGS HAC (hazardous area classification) program which based on KGS GC101 for convenience and popularization. As a result, actual gas leak, CFD and KGS HAC are showing slightly different results. The results of dispersion of 1.8 to 2.7 m were shown in the actual experiment, and the CFD and KGS HAC showed a linear increase of about 0.4 to 1 m depending on the increase in a flow rate. In the actual experiment, the application of 3/8" tubes and orifice to take into account the momentum drop resulted in an increase in the hazardous distance of about 1.95 m. Comparing three methods was able to identify similarities between real and CFD, and also similarities and limitations of CFD and KGS HAC. We hope these results will provide a good basis for future experiments and risk calculations.

• Structural Engineering and Mechanics
• /
• 제80권6호
• /
• pp.701-709
• /
• 2021

The paper aims at improving the understanding and mitigating the effects of tunnel fires that may breakout due to the burning fuel and/or explosion within the tunnel. This study particularly focuses on the behavior of the commonly used horse shoe geometry of tunnel systems. The problem has been obtained using an adequate well-established program incorporating the Lagrangian approach. A transient-thermo-coupled static structural analysis is carried out. The effects of radiation and convection to the outer walls of the tunnel is studied. The paper also presents the impact of the hazard on the structural integrity of the tunnel. A methodology is proposed to study the tunnel fire using a model which uses equivalent steel sheet to represent the presence of reinforcements to improve the computational efficiency with adequate validation. A parametric study has been carried out and the effect of suitable lining property for mitigating the fire hazard is arrived at. Detailed analysis is done for the threshold limits of the properties of the lining material to check if it is acceptable in all aspects for the integrity of the tunnel. The study may prove useful for developing insights for ensuring tunnel fire safety. To conduct such studies experimentally are tremendously costly but are required to gain confidence. But, scaled models, as well as loading and testing conditions, cannot be studied by many trials experimentally as the cost will shoot up sharply. In this context, the results obtained from such computational studies with a feasible variation of various combinations of parameters may act as a set of guidelines to freeze the adequate combination of various parameters to conduct one or two costly experiments for confidence building.

• 산업경영시스템학회지
• /
• 제45권1호
• /
• pp.20-30
• /
• 2022

In this study, in order to confirm the relationship between technical innovation competence and corporate performance, the effect of technical innovation competence of small and medium-sized manufacturing companies on corporate performance was identified, and entrepreneurship, which plays a role as a driving force in triggering technical innovation competence, was analyzed to determine whether there is a mediating effect between them. To conduct the research, first, the research model was established by examining previous studies on technical innovation competence, entrepreneurship, and corporate performance. Second, an on-line and offline survey was conducted for employees in companies after constructing a questionnaire that can verify the hypothesis suitable for the research model. Third, the hypothesis was verified by performing validity and reliability analysis, correlation analysis, and regression analysis using a statistical program. Results of this study, first, it was found that R&D competence and technology innovation system, which are elements of technical innovation competence, had a significant effect on financial performance, and technology innovation system and technology accumulation capacity, had a significant effect on non-financial performance. Second, it was analyzed that entrepreneurship has a mediating effect in both R&D capability, technological innovation system and technology accumulation capability, which are elements of technical innovation capability, and financial and non-financial performance, elements of corporate performance.