• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.117-127
• /
• 2015

This study investigated the smoke blocking and control systems for the safety of residents evacuation and for the prevention of smoke spread through the central corridor in the event of central corridor type of intelligent building fire. We offered additional ways of utilizing smoke ventilators and intake ventilation equipment and utilized CFD-based fire simulation program(FDS Ver.5.5.3) in order to analyze the effect. As a result, many differences in the smoke block effect, depending on the application of smoke ventilator and location of installation, was found. In addition, the result was found that larger effect was showed not in the case of application of smoke ventilator in central corridor only but application in fire room. The reason is that the smoke leakage is blocked primarily as air is flowed in the fire room through open door by operation of intake smoke ventilator in the public corridor and secondarily, the smoke leakage to the public corridor could be blocked as fire and smoke were released to the opened smoke ventilator continuously. Especially, the effect was maximized through complex interactions by applying smoke ventilator and intake ventilation equipment in corridor together rather than applying smoke ventilator and intake ventilation equipment independently. The proposed measure through this study shall be considered from architectural plan as one of ways for blocking from smoke spread to the central corridor in the central corridor type of intelligent building. In addition, flaws on regulation shall be established and supplemented.

• Journal of Adhesion and Interface
• /
• v.9 no.1
• /
• pp.22-27
• /
• 2008

The effect of functional monomers on the acrylic pressure sensitive adhesive (PSA) property was measured. Design of experiments in order to optimal peel adhesion was applied and commercial program (MINITAB) was used. Analysis was used to mixture design (special cubic model) in response surface methodology. Optimal monomer compositions was construed by 2-EHA (0.8861), EA (0.0639), MAA (0.03) and AAm (0.02). The estimated regression equation was as follows : $$y=54.8816x_1+80.7067x_2-44.4700x_3-99.0288x_1x_2+60.7706x_1x_3-441.030x_2x_3+974.341x_1x_2x_3$$.

• Journal of Korean Public Health Nursing
• /
• v.26 no.1
• /
• pp.147-157
• /
• 2012

Purpose: The purpose of this study was to identify the related factors of change affecting the stages of change for exercise, on the assumption that there are various stages of change in the exercise behavior of women in nursing college. Methods: The subjects were 496 female college students in D city. The research instruments were stages of change for exercise behavior, the process of change, decisional balance, and self-efficacy. The dates were analyzed by descriptive statistics, ANOVA, and stepwise multiple regression using the SPSS 18.0 program. Results: The distribution of the subjects across the stages was: pre-contemplation, 17.7%; contemplation, 58.7%; preparation, 19.0%; action, 2.8%; maintenance, 1.8%. Analysis of variance showed that cognitive process (F=17.26, p<0.01), behavioral process (F=27.05, p<0.01), the pros of decisional-balance (F=7.07, p<0.01), the cons of decision-balance (F=5.82, p<0.01), and self efficacy (F=17.79, p<0.01) were significantly associated with the change of exercise behavior stages. The related factors of change affecting the change of exercise behavior stage were the cons of decision-making, counter conditioning, self re-evaluation, and body mass index, including 28.4% R-square. Conclusion: The transtheoretical model would be applicable to explain the exercise behavior of some women in nursing college. So, this study will be useful information for developing effective exercise behavior programs considering female students' stages of change.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.652-662
• /
• 2016

This paper proposes a user mobility management scheme which supports seamless service even if a user changes his accessing terminal in service in IP-based convergence network. Most of ongoing researches concerning mobility management as well as the existing mobility schemes have been focused to support terminal mobility. It is limited to support a variety of mobility types such as user mobility. The proposed scheme uses the mapping relationship between UID(User Identifier), user specific identifier and TID(Terminal Identifier), specific terminal identifier and forms packet address with user specific permanent 3 layer address for session continuity in case of user mobility. We numerically analyze and compare handover signaling cost between the existing user mobility scheme and the proposed scheme. The result shows that the proposed scheme has lower handover signaling cost than the existing one, [1].

• Journal of Korean Institute of Industrial Engineers
• /
• v.13 no.1
• /
• pp.69-87
• /
• 1987

정보통신 산업은 괄목할 만한 성장올 보였으며, 정보산업시대의 핵심 육성 부문으로 지목되고 있다. 본 연구에서는 통신산업분야의 정책부서, 연구소, 기업 및 대학에서 활약하고 있는 70명의 정보통신분야 천문가들을 대상으로 설문조사를 시행하였으며, 설문조사 결과를 토대로 정보통신산업의 잠재적 수요예측과 함께 이러한 수요를 공급하기 위하여 선행되어야 할 연구개발 인력의 수요를 추정하였다. 본 연구결과에 따르면, 정보통신산업은 1991년에 Data Communication 분야에서만 약 48억불의 수요를 유발할 것으로 보이며, 이를 위한 박사 인력의 년간 수요는 1987년에는 500명, 1991년에는 990 명에 이를 것으로 예상되었다. 반면, 최근 문교부에 제출된 바 있는 한 연구보고에 따르면, 88명-145 명에 지나지 않은 것으로 나타나고 있어 심각한 고급인력의 수급난이 예상된다. 이에 따라 본 연구에서는 정부, 산업체 및 대학이 시급히 수렵하여야 할 대응책을 제시하였다. -정부가 지원할 내용으로서, 정보통신분야의 연구개발을 위한 관련학과 교수의 양적, 질적 향상이 요구되며 이를 위한 방안으로 교수진의 critical mass 형성이 촉구되었다. -산업계 역시 통신산업의 폭발적 성장에 대비하기 위하여, 고급인력의 수혜기관의 입장에서 고급인력의 공급을 위한 대응책 마련에 적극적으로 참여하여야 할 것이다. 산업계의 참여 방안으로서, 교수 1인, 박사 후보생 l인, 석사과정 학생 3인을 한 단위로 하는 "research unit"의 형성과 산업계로부터 이들을 위한 지원이 제안되었다. 즉, research unit 100개를 지원하기 위해 산업계는 연간 약380 만불의 교육-연구비를 투입하며, 이러한 지원을 통하여 박사인력의 공급이 배가 될 것으로 예상된다. -대학원 교육의 칠적 향상과 함께 산 학연계 기능을 강화하기 위하여, 정보통신 관련학과와 대학원 교과과정의 개선 방안이 구체적으로 제안되었다. 본 연구에서 제안된 내용은 현재 정부, 정책부서, 산업계, 학계의 요구사항과 전문가 의견을 토대로 요약되었으므로, 제안사항의 체계적인 보완이 이루어지면 그 효과가 지대할 것으로 예상된다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.129-136
• /
• 2018

The IEC 61850 communication standard is used worldwide, and within the country the new substation is built as a digital substation based on IEC 61850 from 2013, after field tests and R&D from 2007. Research on the development of digital substation operating system has been conducted mainly in large domestic companies, so the IED power application equipment for LCP are developed. However, there is still a lack of research in the field of systems that can accommodate all the field devices used for legacy substation and new digital substation. In this paper, we developed the 48VDC input modules and the 125VDC output modules which can construct proposed field information processing modules to IEC 61850 based type, and verified the field applicability from the state monitoring and control operation tests by using IEC 61850 client authentication program and Wireshark.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.195-201
• /
• 2016

An experimental study has been found the air guide grooves for reducing drag. When a bullet is fired and move in the air, the drag is generated. The vortex which is one of the types of drag hinders the movement of the bullet. To solve this phenomenon, cut a negative grooves that we are called the air guiding grooves at the back of bullet. The grooves bullet has identified that the drag compared to conventional ammunition(KM80 and K193) is reduced to 4.480 and 4.054 : 10 % through a Finite Analysis Program($Ansys^{TM}$). Even pressure center was retreating 0.72 % compared to a Bullet(KM80 and K193). Effect obtained with these results is the accuracy of the grooves bullet in a shooting test was improved by over 32 %(KM80: 2.86, air guide grooves : 1.94) compared to conventional ammunition(KM80 and K193). In addition, muzzle velocity is increased 73 m/s. This is expected to be extended the velocity and effective range of bullet. Also, the velocity of the grooves bullet is increased when moving in the air while the velocity of the bullet(KM80 and K193) is reduced. The gas ejected from the muzzle to be balanced and stable flight of the Bullet. Given these effects, we can reckon the air guide grooves have positive influence.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.183-190
• /
• 2014

A Commercial Grade Item Dedication(CGID) for Korean operating nuclear power plants has been implemented since 2012. The CGID implementation and strategies for Korea are established as follows: CGID policy establishment, R&D of a specific methodologies of CGID, enrollment of third party organizations for CGID work, CGID program establishment for enrolled suppliers, establishment of training courses for certification, and CGID process development for quality class Q and A. Consequently, it is expected that these activities are enable to enhance the reliability and the safety of components and/or parts in nuclear power plants.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.5
• /
• pp.413-418
• /
• 2003

Genetic diversity and soybean sprout-related traits were evaluated in a total of 72 soybean accessions (60 Glycine max, 7 Glycine soja, and 5 Glycine gracilis). 100-seed weight (SW) was greatly varied and ranged from 3.2g to 32.3g in 72 soybean accessions. Positive correlation was observed between GR and hypocotyl length (HL), whereas negative correlation was observed between SW and hypocotyl diameter (HD). Re-evaluation by discarding two soybean genotypes characterized with low GR indicated that much higher correlation of sprout yield (SY) with HD and SW. Based on the principal component analysis (PCA) for sprout-related traits, 57 accessions were classified. Soybean genotypes with better traits for sprout, such as small size of seeds and high SY, were characterized with high PCA 1 and PCA 2 values. The seed size in second is small but showed low GR and SY, whereas the third has large seed, high GR and more than 400% SY. In genetic similarity analysis using 60 SSR marker genotyping, 72 accessions were classified into three major and several minor groups. Nine of twelve accessions that were identified as the representatives of soybean for sprout based on PCA were in a group by the SSR marker analysis, indicating the SSR marker selection of parental genotypes for soybean sprout improvement program.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.566-574
• /
• 2016

Fiber metal laminates, which are hybrid materials consisting of metal sheets and composite layers, have contributed to aerospace and automotive industries due to their reduced weight and improved damage tolerance characteristics. In this study, the impact performance of the laminates, which are comprised of a self-reinforced polypropylene and two aluminum sheets, and the pure aluminum alloy sheet material were investigated experimentally via numerical simulation. In order to compare the impact performance, the laminates and aluminum alloy were examined by assessing the impact force, energy time histories, and specific energy absorption. ABAQUS is a commercial software that is used to simulate the actual drop-weight tests. Based on this study, it is noted that the impact performance of the laminates was superior to that of the aluminum alloy. In addition, a good agreement between the experimental and numerical results can be achieved when the impact force and energy time histories from the experiments and the numerical simulations are compared.