• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.285-291
• /
• 2017

In this study, a case analysis for thermal design of electronic equipment using a phase change material(PCM) was performed numerically using ANSYS Fluent. Experiments were conducted to find the temperature increase(${\Delta}T_m$), melting temperature($T_m$), and volume expansion of the PCM under the melting process. To verify the accuracy of the Fluent solver model, $T_m$, ${\Delta}T_m$, and the melting time were compared with experimental results. To simulate the temperature stagnation phenomenon under the melting process, the equivalent specific heat method was applied to calculate the thermal properties of the PCM in the solver model. To determine the thermal stability of electronic equipment, we paid special attention to finding a thermal design for the PCM using fins. Further, an additional numerical analysis is currently underway to find an optimum design.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.316-320
• /
• 2019

The effect of boronizing on mechanical properties including wear behavior and hardness of Inconel 625 superalloy were investigated. The cross-section observation demonstrated that boronized samples were composed of multi-phase boride layer (Cr_xB_x, Ni₂B), diffusion layer, and substrate. The boride and diffusion layers were increased with increasing treatment temperature and holding time. However, Cr_xB_x layer was partially peeled off when it treated 1000℃. Subsequently, boride layer was completely separated from substrate with increasing temperature and time. A partial peeling of Cr_xB_x layer is not noticeably degraded mechanical properties. In particular, friction coefficient and wear resistance were enhanced in lack of Cr_xB_x phase. Therefore, these results suggest that a Ni₂B phase mainly contribute to wear behavior on boronized Inconel 625 superalloy.

• Mass Spectrometry Letters
• /
• v.2 no.4
• /
• pp.88-91
• /
• 2011

The pharmacokinetic properties of S-amlodipine were studied using racemic amlodipine and single S-enantiomer (SK310) administration to rats. Plasma levels of the drug were determined using chiral liquid chromatography coupled with tandem mass spectrometry following solid phase extraction. The stereospecific analysis of amlodipine was performed on an ${\alpha}$-acid glycoprotein (AGP) column using a mobile phase comprising 10 mM ammonium acetate (pH 4.0) and propanol at a flow rate of 0.2 mL/min. This method was used to perform a comparative study of the pharmacokinetics of amlodipine and SK310. The results revealed that the pharmacokinetic profile of S-amlodipine after the administration of SK310 was comparable to that following the administration of the racemic mixture.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.190-195
• /
• 1995

Temperature dependences of the dielectric constant K(T), remanent polarization $P_{r}$, (T), effective birefringence overbar .DELTA.n(T), transmitted light intensity and quadratic electro optic coefficient R(T) of the two-stage sintered xBa(L $a_{1}$2/N $b_{1}$2/) $O_{3}$-(1-x)Pb(Z $r_{y}$ $Ti_{1-y}$) $O_{3}$(x=0.085, 0.09, 0.40.leq.y.leq.0.70) ceramics were investigated. Increasing the PbZr $O_{3}$ contents, the crystal structure of a specimen was changed from a tetragonal phase to a rhombohedral and cubic phase, and the phase transition was showed a diffuse phase transition(DPT) characteristics. In the compositions which located on the PE-FE phase boundary, the discrepancy was observed between the Curie temperature and temperature which a microscopic polarization and effective birefringence were disappeared.red.d.

• 한국벤처창업학회:학술대회논문집
• /
• 2009.10a
• /
• pp.51-78
• /
• 2009

Nowaday, management of research and development(R&D) projects is focused on promotion of performance-centric R&D by market and customer-oriented R&D and commercialization, and this tendency is also appeared in national R&D projects. For the commercialization of R&D outcomes, market demand-centric R&D, establishment of commercialization plan in R&D planning and carrying out phase, and communication with external stakeholders are needed, and these activities can be performed more effectively by developing business model. However, systematical procedure for developing business model in national R&D environment haven't suggested by prior researches. Therefore, we propose a business model development system that is reflect characteristics of national R&D environment and perspectives of technology researchers and commercialization experts. Research result is expected to be usefully applied as a guideline for developing business model in national R&D projects.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.313-316
• /
• 2005

본 논문은 대용량 진력변환장치인 멀티-레벨 인버터 시스템에서 출력 전압가변이 손쉬운 HBML(H-Bridge Multi-Level) 인버터의 Master와 Cell 제어기 구성에 관한 것이다. HBML 인버터는 각각의 단위 Cell을 저압에서 사용하는 인버터로 구성하면, 구조적으로 풀-브릿지(Full-Bridge) 인버터를 캐스케이드 방식으로 연결하여 고압출력을 얻을 수 있는 토폴로지이다. 시스템에서 Master와 Cell의 제어 처리를 한곳에 집중하지 않는 분산 제어 방식을 적용하여 통신 Data를 최적화하도록 구성하고, 이를 바탕으로 두 제어기를 고성능 원-칩(One-Chip) DSP로만 설계하였다. 모든 외부 모듈을 내장한 CPU로 제어기가 구성될 경우, 외부 노이즈에 강하며, 추가되는 하드웨어 결선을 최소화할 수 있다. 본 논문에서는 HBML 인버터 출력 생성 시 반드시 요구되는 출력 PWM 동기 및 위상전이(Phase Shift)를 각 제어기 자체에 내장된 모듈만을 이용해서 구현하였다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.749-752
• /
• 1993

This paper deals with the development of three phase 440[V], 500[KVA] Inverter system using the IGBT Devices. IGBT's have been used very successfully in variable frequency induction motor drive equipment. Problems associated with power devices characteristics when power devices are operated in parallel, such as balanced switching behavior and thermal stability, can be solved by using NPT type IGBT's. By Experimental results, it is confirmed that the voltage overshoot and reverse recovery current was very low. The equipment had proved to be reliable and short circuit proof. In addition, the performances in term of thermal characteristics, protection functions and stability are satisfactory.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.709-718
• /
• 2017

This paper proposes the guidance laws for an agile turn of air-to-air missiles during the initial boost phase. Optimal solution for the agile turn is obtained based on the optimal control theory with a simplified missile dynamic model. Angle-of-attack command generating methods for completion of agile turn are then proposed from the optimal solution. Collision triangle condition for non-maneuvering target is reviewed and implemented for update of terminal condition for the agile turn. The performance of the proposed method is compared with an existing homing guidance law and the minimum-time optimal solution through simulations under various initial engagement scenarios. Simulation results verify that transition to homing phase after boost phase with the proposed method is more effective than direct usage of the homing guidance law.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.70-72
• /
• 2017

We proposed a multi-input multi-output automatic repeat request (MIMO-ARQ) scheme using double multi-strata space-time code (D-MSSTC) for high spectral efficiency in $4{\times}N_r$ MIMO systems. To improve error performance of the proposed scheme, we allocate power and phase to each layer of MSSTC over every transmission. Additionally, we suboptimally optimize power allocation to maximize the minimum coding gain distance of D-MSSTC and phase allocation to efficiently minimize inter-layer interference in MSSTC. In simulation results, it is observed that the proposed MIMO-ARQ scheme based on D-MSSTC shows better block error rate (BLER) performance than conventional schemes.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.52-62
• /
• 2002

Electrical characteristics of two types of 20 GHz Push-Push GaAs MESFET dielectric resonator oscillators having Wilkinson and T-junction power combiners for the output stage have been investigated. The Push-Push oscillator for suppressing fundamental frequency 10 GHz and enhancing 20 GHz has been designed and realized in microstrip configuration on 20 mil thick RT-Duroid(${\varepsilon}_r$=2.52) teflon substrate. Two different types of power combiners, T-junction and Wilkinson, have been considered. Whenever one type of the combiners has been adopted for the output circuit, output power, phase noise and fundamental frequency suppression characteristics of the oscillator have been measured. When the Wilkinson power combiner was used, a maximum output power of 5.67 dBm, a phase noise of -105.5 dBc/Hz at an offset frequency of 100 kHz and a fundamental frequency suppression of -29.33 dBc have been measured. When the T-junction power combiner was used, a maximum output power of -1.17 dBm, a phase noise of -102.2 dBc/Hz at an offset frequency of 100 kHz and a fundamental frequency suppression of -17.84 dBc have been measured.