• 한국가스학회:학술대회논문집
• /
• 2004.11a
• /
• pp.158-163
• /
• 2004

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.127-138
• /
• 2018

Spoofing attacks including meaconing can provide a bogus position to a victim GPS receiver, and those attacks are notably difficult to detect at the point of view on the receiver. Several countermeasure techniques have been studied to detect, classify, and cancel the spoofing signals. Based on the countermeasure techniques, we have developed an anti-spoofing equipment that detects and mitigates or eliminates the spoofing signal based on raw measurements. Although many anti-spoofing techniques have been studied in the literatures, the evaluation test system is not deeply studied to evaluate the anti-spoofing equipment, which includes detection, mitigation, and elimination of spoofing signals. Each study only has a specific test method to verify its anti-spoofing technique. In this paper, we propose the performance evaluation test system that includes both spoofing signal injection system and its injection scenario with the constraints of stand-alone anti-spoofing techniques. The spoofing signal injection scenario is designed to drive a victim GPS receiver that moves to a designed position, where the mitigation and elimination based anti-spoofing algorithms can be successively evaluated. We evaluate the developed anti-spoofing equipment and a commercial GPS receiver using our proposed performance evaluation test system. Although the commercial one is affected by the test system and moves to the designed position, the anti-spoofing equipment mitigates and eliminates the injected spoofing signals as planned. We evaluate the performance of anti-spoofing equipment on the position error of the circular error probability, while injecting spoofing signals.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.148-157
• /
• 1998

This study presents test results of a residential window air-conditioner using R22 and two potential alternative refrigerants, R407C and R410B. A series of performance tests has been carried out for the basic and liquid-suction heat exchange cycles in a psychometric calorimeter test facility. For R407C, the same rotary compressor was used as in the R22 system. However, compressor for the R410B system was modified to provide the similar cooling capacity. The evaporator circuit was changed to get a counter-cross flow heat exchanger to take advantage of zeotropic mixture's temperature glide, and liquid-suction heat exchange cycle was also considered to improve the system performance. Test results were compared with those for the basic R22 system. The modified system with a liquid-suction heat exchanger increased cooling capacity and energy efficiency by up to 5%.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.64-70
• /
• 2016

The recent development of modern weapon system by SOS (System of System) has required users to have more exact decision making. It is possible to achieve the control of complex weapon system more efficiently and effectively by increasing usability. Accordingly, many studies on graphical display have been conducted for several years in the field of HCI (Human Computer Interaction) and GUI (Graphic User Interface), starting from its design stage. Therefore, this paper focuses on evaluating the system GUI usability and analyzing several important points based on performance model, which is a tool for the evaluation and the improvement of service quality. Performance Model, the main focus of this study, reflects user expectations (which is defined as user importance in this paper). The study consists of four steps. First, 34 checklists are drawn from the existing studies related to GUI usability evaluation by using a heuristic method, and then the checklists are matched with 11 weapon system design factors. Next, the study evaluates the importance of GUI element and the usability of weapon system "A" with the checklists twice respectively. Third, the performance of user importance ($P_i$) and the performance of usability ($P_u$) are calculated by modifying a numerical formula for normalization in this step. Finally, the study compares the approach it takes and the existing usability evaluation method, demonstrating that there is a significant difference between the two methods as a result. In addition, 4 improvement factors are suggested for weapon system "A" as "Shortcut" and "Description of Abbreviation," and so on. Although it is necessary to conduct more studies for higher reliability and validity of the results, this study is meaningful considering it takes a new point of view.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.124-132
• /
• 2018

The supply of renewable energy has become more vigorous due to Paris Agreement. In Korea, supply policies of renewable energy is being promoted with priority given to public buildings, so, the supply of fuel cell system that are relatively easy to install in buildings is expected to expand, so it is important that study on anti-islanding evaluation of grid-connected power conditioning system(PCS) for fuel cell. In this study, we consider that KGS AB934 PC53 in domestic certification standard of PCS for fuel cell correspond with abroad standard and analyze anti-islanding evaluation that important safety performance when connected grid. Additionally, we constructed a prototype for anti-islanding evaluation of PCS for fuel cell connected in parallel and carried out the demonstration evaluation, so, we have conducted ways that ensure safety performance in accordance with the circumstances where several fuel cell systems are installed.

• Journal of Technology Innovation
• /
• v.29 no.4
• /
• pp.95-124
• /
• 2021

Startups play an important role in economic growth and job creation in niche markets, thus governments regularly expand their research and development(R&D) budgets accordingly. As stratups are more dependent on governments to compensate for insufficient resources and capabilities than large and medium-sized companies, trust in government policies will be important. In this study, we analyzed the impact of startups' trust in government R&D policies on innovation performance. There were three major results. The first result is that government R&D investments in startups increase innovation performance in the manufacturing and high-technology industries but did not affect other industries. The second result is that trust in government R&D policies increased innovation in high-and medium-high technology and manufacturing industries. The third result is that trust in government R&D policies affects innovation before, during, and after evaluation of support process. We analyzed the importance of trust to the effectiveness of government R&D support to determine how to effectively provide it. The results show that governments need to differentiate the types of R&D support they provide according to the target firm's technology level and whether they are a manufacturing company and that appropriate R&D support mechanism should be developed for low-technology and non-manufacturing companies. Finally, governments should allocate resources and make fair and transparent decisions to help companies grow, not to better supervise them.

• Journal of Korea Technology Innovation Society
• /
• v.4 no.3
• /
• pp.255-274
• /
• 2001

This study aims to provide information about the priority setting and budget coordination of government R&D spendings in Korea. Based on the result of "Survey, Analysis and Evaluation of National R&D Programs"in FY 2000. this paper reviews the government R&D expenditures by the concerned variables such as program objectives, sector of performance, character of work and technology fields. It is found that R&D spendings on the areas of industrial development, information technology, and development research are funded pretty high. Also, it turns out that, considering program objectives and character of work, there are some redundancies of R&D programs among government agencies. Policy implications are suggested.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.71-81
• /
• 2010

In 1994, Korean construction research and development (R&D) projects received investments amounting to 1.2 billion KRW, an amount that rose to 164.8 billion KRW in 2007. Under the current system, construction researchers submit the application records of Construction Research and Development (R&D) in construction projects to the Korea Institute of Construction & Transportation Technology Evaluation and Planning. The performance of Construction R&D projects has thus been dependent on the subjective reporting of the results by the researchers themselves. For this reason, it is difficult to secure confidence in the records of Construction Research and Development. Therefore, this research suggested measures for revitalizing Construction Research and Development, analyzed approaches to cost-saving in Construction Research and Development, and analyzed economic effectiveness in the results of construction R&D.

• The KIPS Transactions:PartB
• /
• v.14B no.6
• /
• pp.407-412
• /
• 2007

The performance of ultrasonic testing systems for industrial or medical purpose largely depends on the performance of ultrasonic transducers. Generally, the information about an ultrasonic transducer performance characteristics are expressed by the ultrasonic R/F signal back from a reflector and its frequency characteristics in the data sheet provided by manufacturers. In case of focused ultrasonic transducers, the two pieces of information can, however, hardly assure that the focused ultrasonic transducer would produce well-focused C-scan images. Therefore, we propose the measured size of focal spot and the reconstructed shape of effective focal zone in the focused sound field as novel measures for the performance evaluation of the focused ultrasonic transducers. The process of getting the both measures of the transducers is conducted by the implemented software including sound field scanning and virtual 3D reconstruction functions which requires the echo of a point reflector. The proposed method could, otherwise impossible in the existing method, effectively and simply distinguish superior ones among many transducers made in the same specification and be also used to detect the performance degradation due to the aging of the transducers. Eventually, the quality of performance of the ultrasonic testing systems for industrial or medical purpose is secured.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.3
• /
• pp.722-743
• /
• 2012

Confronted with increasing global competition and rising research and development risks, the global open innovation has receiving increased attention. This study empirically investigates whether or not international cooperative R&D is effective by evaluating the quality indicators with the patents with international co-applications. The number of patents with international co-applications has dramatically increased in recent years. According to the results, the outcome from international cooperative R&D is prominent in term of all the evaluation criteria such as the number of citation, patent families, claims, and et cetera, compared with that from domestic cooperative R&D. Based on the patent quality, the information technology sector holds the top spot and high-tech sectors such as bio and automobile industries show the better quality performances. By identifying high betweeneess centrality in the network analysis of international cooperative R&D, the US is indicated as the most central country in such cooperative activity, and then Germany, the UK, Canada, and France come after.