• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.153-168
• /
• 2011

In medium and small firm, the management system which is simple and where there is a practicality is required Ill)re than the management system which is complicated and minute of the centered around large company so that the introduction of the standard costs can be activated and it can be usefully used as a tool of management decisions. A difference between the standard costs introduction plan proposed in this paper and the preexistance study literature are as follows. In this paper, by breaking from the whole cost accounting aiming at all item, that is the traditional introduction method, and presenting the product cost accounting method by group the standards setting object was minimized and simplified. In this way, if the standards setting object is simplified, it is quick at the perimeter environment change as the little man power and flexibly it corresponds to and the cost information calculation which is exact with the setting up and maintenance of the efficient cost standard becomes available. As a result of applying for real through S corp., the usability of the method that the standard costs introduction method proposed in this paper produced the standard costs relatively short within period, it manages was verified. And the standard costs introduction method proposed in this paper went by the various cost information for each products, the management class did the management will decision which was objective and reasonable in the putting first.

• 한국빅데이터학회지
• /
• 제2권1호
• /
• pp.59-69
• /
• 2017

재난 경제학 분야의 선행연구는 대부분 뒤늦은 거시지표 또는 특정 업종에 국한된 분석형태이다. 재난 예방이 무엇보다 중요하지만, 재난 발생 즉시 파급되는 실시간 영향도 분석 및 그에 따른 재건 정책 또한 예방 못지 않은 중요한 분야이다. 본 연구는 카드사의 실시간 빅데이터를 활용한 사건 연구로 세월호 참사와 메르스 사태로 인한 민간소비의 파급효과를 분석하였으며 Marketing Mix Modeling 방법론의 Idea를 활용하였다. 분석 결과 세월호 참사는 3개월에 걸쳐 민간소비가 위축된 반면 메르스 사태는 비슷한 규모로 1개월동안 일시적인 급격한 민간소비 감소현상을 보이고, 바로 회복하는 모습을 보였다. 본 연구의 초점은 재난이 종료되지 않은 시점에서 속보성으로 피해규모가 파악이 가능한지 알아보고자 한 것이며 분석모형을 주간 단위로 설계하여 시점을 이동하면서 분석했을 경우 속보성 지표로도 의미가 있다는 것을 확인하였다. 향후 재난 또는 사건 발생시 본 연구가 직관적인 모니터링 지표로서의 초석이 되길 기대한다.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• Human Ecology Research
• /
• 제54권3호
• /
• pp.333-349
• /
• 2016

This study develops and evaluates a game-based lesson plan applied to the 'Food Culture' unit of a high school Home Economics class. We developed, implemented, and evaluated lesson plans for seven periods that contained 'the Korean food table setting card,' 'the world's food culture card,' and the procedure for cards games according to the Analysis, Design, Development, Implementation, and Evaluation (ADDIE) model. 'The Korean food table setting card' consisted of 'the Korean food table setting order card' to easily understand 10 types of Korean traditional daily meals based on pictures and 'the Korean food table setting food card' to easily understand Korean traditional food based on 104 kinds of food picture and quick response (QR) code. 'The world's food culture card' consisted of 'the world's food culture quiz card' to help learners easily understand influential food culture formation factors, features of food culture, typical foods from 16 countries, and 'the world's traditional food card' to help learners easily understand typical foods from 16 countries through 63 kinds of pictures. Respective 'game guides' were also developed. High school students who studied the game-based Home Economics classes and who participated in the 'Food Culture' unit, could easily and enjoyably learn the food culture of Korea (and other countries), actively participate in learning activities, and understood the content of food culture. In addition, they evaluated that the game-based instruction was easy to remember with minimal memorizing.

• Advances in materials Research
• /
• 제3권2호
• /
• pp.91-103
• /
• 2014

A study that demonstrates how to investigate the molded part quality and the consistency of injection process based on the rheological concept is proposed. It is important for plastic material whose melt viscosity is variable with respect to the processing condition. The formulations to couple the melt viscosity with injection pressure and fill time are derived first. Taking calculations of the measured pressure and the time by using these formulations, the melt viscosity in injection process can be determined on machine. As the relation between the injection speed and the melt viscosity is constructed, the influences of the setting parameter of injection machine on the molded part quality can be investigated through evaluating the state of the melt viscosity. In addition, a pressure sensor bushing (PSB) designed with a quick installation feature is also provided and validated. The results show that a higher injection speed improves the tensile strength of the molded part but also the consistency of the molded part quality. This work provides an alternative to evaluate the molding quality scientifically.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.505-508
• /
• 2006

Self-leveling mortar is walkable bottom mortar which can maintain the horizontality of self fluid and have the the quick-setting quality, the low-human-effort practicable material of high-quality bottom in construction. In accordance with more adhesive strength with bottom side and absorption control, Primer is used for purpose to prevent pin-hole occurrence by self leveling mortar application prior to construction. This study is composed measurement of absorption, adhesive strength. Used material is NP-40 as nonionic emulsifying agent, uses SA-210L as negative ion emulsifying agent, uses APS, SBS as ridical initiator. A result of test, in accordance with image of Primer, as low temperature and application frequency, indicates low absorption rate and adhesive strength, as solid powder and dryness time is increse, absorption rate and adhesive strength lowly shows figure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.809-813
• /
• 2000

In this study, screw machining system by use of a rotational tool such as an end-mill or a face cutter with Y axis off-set on a CNC turing center was developed for quick machining. In this system, It was possible to use different tools for different processes, and by off-setting the tool in Y direction by calculated amount it was possible to avoid tool interference problem which could occur within the central area at the end of a tool. In addition, machining a screw with a helix of up to 3 different leads combined and with tapered minor diameter was possible.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.150-151
• /
• 2016

In previous study, researchers studied development of early anti-freezing cement at low temperature (-5℃) using hydration characteristics of reduction slag. In this study, the durability of concrete using reduction slag was conducted. The experiment result, reduction slag makes high temperature and improves compressive strength due to quick setting. And then result of durability show that it is no problem. However, it is considered that further study is needed about high shrinkages which was indicated in dry shrinkage.

• 한국농공학회지
• /
• 제41권1호
• /
• pp.97-105
• /
• 1999

Recently , polymer concrete has been widely used in the construction industry because of its quick setting, high strength, excellect adhesion, watertightness and chemical resistance compared to ordinary cement concrete. Its application is also increased. In this paper, lightweight polymer mortars using unsaturated polyester resin and lightweight aggregate are prepared with various mix proportations, and tested for slump working life, apparent specific gravity , flexural and compressive strengths. As a result, the slump and working life can be controlled and thier flexural and compressive strengths are 9.7 to 22.0 MPa , and 23.0 to 100.8 MPa respectively at apparent specific gravities of 0.86 to 1.73.

• Computers and Concrete
• /
• 제4권1호
• /
• pp.33-47
• /
• 2007

Slipforming is a construction method in which the forms move continuously during concrete placement. This paper presents a numerical procedure based on the finite element method to simulate the thermal behavior of concrete during slipforming operations. The validity of the model was successfully tested by simulating a very complex but well documented field case of actual slipforming operations performed during the construction of an offshore concrete oil platform structure. The results obtained have been related to the shape of the concrete "hardened front" in the forms, which allows quick evaluation of the operation. The results of the numerical investigation have shown that the shape of the "hardened front" can be affected by the temperature of the fresh concrete and ambient conditions. For a given initial concrete temperature, there are limitations for the ambient temperature that, when exceeded, can create an unfavorable shape of the concrete "hardened front" in the forms. Similarly, for a given ambient temperature, the initial concrete temperature should not be fall below an established limit in order to avoid unfavorable shape of the "hardened front".