• 환경영향평가
• /
• 제29권1호
• /
• pp.61-77
• /
• 2020

현재 국내 주요 공공수역은 국가차원 아래 체계적인 물환경 관리가 되어왔고, 특히 하천, 호소 등 생태계의 실태파악 및 대응을 위해 지속적인 모니터링 및 관리가 이루어져 왔다. 그 중, 수질측정망은 수질측정 주기가 8일에서 한 달 주기로 조사되는 반면, 자동측정망의 경우, 실시간 자료를 수집함으로써 일 데이터 자료를 제공하고 있다. 따라서 측정망 자료를 활용하여 동일한 수질항목에 대해 추세변화를 분석하고 통계적 방법을 통해 비교하였다. Mann-kendall test 결과 Water Temperature (WT)와 DO는 모든 지점이 통계적으로 유의하지 않은 것으로 확인되었고, 특히 TOC에서는 4개 지점, TN은 2개 지점, TP는 3개 지점, Water Temperature (WT)는 7개 지점, pH는 2개 지점, EC는 5개 지점, DO는 6개 지점에서 동일한 추세 경향을 보였다. LOWESS 분석 결과, TOC와 pH의 측정망 결과는 서로 다른 추세를 보이는 것으로 분석되었다. 지점별, 항목간 상관관계 분석결과에 따르면 안동댐하류-안동1 지점에서는 TP, 도개-산곡지점에서는 TOC, 고령(자동)-고령 지점에서는 pH, 적포-창녕 지점에서는 TP, 감천-감천2-1 지점에서는 TN, TP, pH, EC, DO 항목을 제외하고 나머지 항목에서 유의한 양의 상관관계를 보이는 것으로 분석되었다. 그리고 신암-상주2 지점과 남강-남강4 지점에서는 모든 항목에서 유의한 양의 상관관계를 나타내는 것으로 분석되었다.

• 한국지반환경공학회 논문집
• /
• 제11권3호
• /
• pp.5-16
• /
• 2010

국내 지하수 오염을 감시 관측하기 위하여 1990년대 초부터 2,000개 이상의 지하수수질측정망이 설치 운영중에 있으며, 지하수오염우려가 높은 지점에 설치된 781개소의 1996년부터 2007년까지 연 2회 분석 자료를 활용하여 오염우려지역에서의 지하수 수질 현황과 추세특성을 분석하였다. 건강상 유해물질이 검출된 경우의 평균 농도는 시안, 수은, 페놀, 6가 크롬, 트리클로로에틸렌, 데트라클로로에틸렌, 1.1.1-트리클로로에탄 등에서 생활용 지하수 수질기준을 초과하는 것으로 나타났고, 일반오염물질의 평균 농도는 기준 이하로 나타났으나 이는 상대적으로 비오염지역에 설치된 국가지하수관측정의 수질 보다 농도가 높은 것으로 나타났다. Sen의 방법을 이용하여 토지용도별로 일반오염물질(염소이온농도, 질산성질소, 수소이온농도)과 전기전도도의 추세를 평가한 결과, 도시지역과 공단지역 등에서 수질 악화 비율이 높은 것으로 나타났고, 2000년대 중반에도 수질 악화는 더욱 가속화되는 것으로 평가되었으며, 지역에 따라 수질이 개선되는 지역이 있는 반면 수질악화가 심화되는 등 추세의 편차가 증가되는 것으로 나타났다. 따라서, 계속되는 수질 악화를 방지하기 위해서는 본 연구에서 제시된 수질 악화 추세가 높은 지역에 대해서 보다 세밀한 감시 관측을 수행하고 보다 정밀한 분석을 통하여 개선 대책을 수립, 시행하는 것이 필요된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.48-50
• /
• 2009

This paper presents an IAQ(Indoor Air Quality) Monitoring System using equipments for measurement of fine Particle($PM1{\sim}PM10$), $CO_2$, VOCs(Volatile Organic Compounds), temperature and humidity for IAQ monitoring of subway station which millions of people use a day. The necessity of IAQ monitoring system is getting increased for more effective subway station monitoring in line with the recent government's regulation for IAQ is reinforcing. Subway Station is an unusual case. The structure of subway station is closed and complicated. Therefore when data of equipments are transferred, transmission error can happen occasionally. To prevent transmission error, an IAQ Monitoring System is needed the appropriate position and selection of equipments or sensor module. In addition IT(Information Technology) can be utilized like "WiBro(Wireless Broadband)" and "GateWay" for facilitate movement of data and construction of IAQ monitoring system of subway station.

• Journal of Welding and Joining
• /
• 제21권7호
• /
• pp.34-41
• /
• 2003

Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are studied. The material of tube is 60kg/$\textrm{mm}^2$ grade steel sheet, and the longitudinal butt-joint is shaped by 2 roll bending machine. The tube with a thickness of 1.5mm, diameter of 105.4mm and length of 2000mm is successfully obtained by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. Experimental results show that the developed welding system can be used for the precision seam tracking and the real-time monitoring of weld quality, and the laser welded tube can be used for car body md component after tubular hydroforming.

• 한국전자통신학회논문지
• /
• 제14권4호
• /
• pp.723-728
• /
• 2019

우리가 일상적으로 마시는 수돗물의 경우 수질의 오염에 대한 시민들의 불신은 매우 높은 편이다. 또한 수돗물의 수질오염사고는 예측이 어렵고 그 위험이 커서 실시간 모니터링과 관리가 필요하다. 따라서 사물인터넷을 이용한 실시간 수질 모니터링의 도입이 필요한 분야라 할 수 있다. 잔류염소는 다른 소독제보다 잔류성 및 경제성이 우수하고 잔류효과 확인이 쉬워 상수도에서 주로 소독 지표로 활용되는데 수돗물의 안전성을 확보하는 차원에서 사물인터넷기술을 이용하여 실시간으로 감시가 가능하다. 본 연구에서는 전류법 센서를 이용하여 실시간 수질 모니터링을 위한 스마트 디바이스를 개발하고 그 성능을 분석하였다.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.120-128
• /
• 2011

Korea Groundwater Quality Monitoring Network is a database of annual groundwater quality survey results to prevent groundwater pollution. We estimated contamination index (CI) values for each type of land use, and analyzed temporal trends of pollutant concentration data in the Groundwater Quality Monitoring Network from 2001 to 2009. Among the pollutants considered in the database, the concentrations of nitrate and chloride were higher than their standards. In the case of nitrate, recreation parks, golf courses and general waste dumping regions showed increasing trends according to linear regression analysis, whereas industrial complexes and residential regions of urgan and recreation parks showed increasing trends in the chloride concentration data. According to multiple variable linear regression analysis, EC, pH and topography were major factors influencing CI values. These results suggest that groundwater with a high CI value and increasing trend is vulnerable for potential contamination, which requires more careful groundwater pollution control.

• 재활간호학회지
• /
• 제18권2호
• /
• pp.107-117
• /
• 2015

Purpose: This study was conducted to identify the effects of a self-monitoring rehabilitation program based on the Bandura's self-efficacy theory on the activities of daily living (ADL), 6-minute walking distances, self-efficacy and quality of life (QoL) among stroke patients after three to six months. Methods: The participants consisted of 29 patients in the experiment group and 28 patients in the control group who admitted at rehabilitation specific hospital. Self-monitoring program developed by the researcher lasted twice a week for 8 weeks from August to September, 2013. Results: ANCOVA showed that all of dependent variables of this study, ADL and 6-minute walking distances as a physical function, self-efficacy and QoL for intervention group were higher than those for control group(p<.001). Conclusion: The self-monitoring rehabilitation program based on the self-efficacy theory was found to be effective in improving physical function, self-efficacy and QoL for early post-stroke patients. Early rehabilitation program for stroke patients was recommended to consider the self-monitoring of current physical and psychosocial status as a strategy of self-management.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.

• 환경영향평가
• /
• 제3권2호
• /
• pp.69-75
• /
• 1994

Environmental Impact Assessment is composed of screening, scoping, inventory survey, prediction, assessment, alternative assessment, mitigation measure, and post management. Environmental monitoring data is applied to EIA process such as prediction and post management. It must he collected and managed systematically for effective applying in EIA process. This article explains factors such as air quality, water quality, soil, ocean, odor, noise & vibration, ecosystem, etc. and organizations of environmental monitoring managed by Ministry of Environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.