• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.159-161
• /
• 2003

Electrode movement signal has been widely used in resistance spot welding system This study is to compare accelerometer signal with gap sensor signal in servo gun system. This study propose that accelerometer output signal is a useful technique of quality monitoring in resistance welding processes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.36-41
• /
• 2018

An image intensifying device is equipment that makes weak objects visible in a dark environment, such as making nighttime bright enough to let objects be visually observed. It is possible to obtain a clear image by amplifying the light in the presence of a certain amount of weak light. However, in an extremely low-light environment, where even moonlight is not present, there is not enough light to amplify anything, and the sharpness of the screen deteriorates. In this paper, a method is proposed to improve image quality by using multiple filters and anisotropic diffusion for output noise of the image-intensifying device in extreme low-light environments. For the experiment, the output of the image-intensifying device was obtained under extremely low-light conditions, and signal processing for improving the image quality was performed. The configuration of the filters for signal processing uses anisotropic diffusion after applying a median filter and a Wiener filter for effective removal of salt-and-pepper noise and Gaussian noise, which constitute the main noise appearing in the image. Experimental results show that the improvement visually enhanced image quality. Both peak signal-to-noise ratio (PSNR) and SSIM, which are quantitative indicators, show improved values.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.9 s.114
• /
• pp.897-903
• /
• 2006

The reduction of the vehicle interior noise has been the main interest of noise and vibration harshness (NVH) engineers. The driver's perception on the vehicle noise is affected largely by psychoacoustic characteristic of the noise as well as the SPL. In particular, the heating, ventilation and air conditioning (HVAC) system sound among the vehicle interior noise has been reflected sensitively in psychoacoustics view point. Even though the HVAC noise is not louder than overall noise level, it clearly affects subjective perception to drivers in the way of making to be nervous or annoyed. Therefore, these days a vehicle engineer takes aim at developing sound quality as well as reduction of noise. In this paper, we acquired noises in the HVAC from many vehicles. Through the objective and subjective sound quality (SQ) evaluation with acquiring noises recorded by the vehicle HVAC system, the simple and multiple regression models were obtained for the subjective evaluation 'Pleasant' using the semantic differential method (SDM). The regression procedure also allows you to produce diagnostic statistics to evaluate the regression estimates including appropriation and accuracy. Furthermore, the neural network (NN) model were obtained using three inputs(loudness, sharpness and roughness) of the SQ metrics and one output(subjective 'Pleasant'). Because human's perception is very complex and hard to estimate their pattern, we used NN model. The estimated models were compared with correlations between output indexes of SQ and hearing test results for verification data 'Pleasant'. As a result of application of the SQ indexes, the NN model was shown with the largest correlation of SQ indexes and we found possibilities to predict the SQ metrics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.614-621
• /
• 2004

At present, the electronic document is being processed in WYSWYG mode. For this, a document is structured by the logical structure and the physical structure, and is presented by the markup language. After XML is announced, an application scope of the electronic document is extended from interchanging to searching. However, in point of output quality, a XML document image on a browser has lower quality than a general document image on desktop publishing. The reason is which output function of a browser has not capability for high quality printing. The W3C developed XSL-FO(XSL-formatting Object) for style sheet formatting and PDL(Page Description Language) as like Postscript is already developed and used widely. In this paper, we designed the Postscript-Converter to get a high quality document image by converting XSL-FO into Postscript format.

• Communications of Mathematical Education
• /
• v.31 no.2
• /
• pp.167-185
• /
• 2017

The purpose of this study is to analyze the actual states of the elementary school and the middle school mathematics education as a curriculum quality-management. To this end, this study surveyed the input, process and output phase in the school curriculum to the teachers, students and parents. The results are like these: First, the achievement standards contents in the elementary school and the middle schools are relevant in the input phase. Second, the teachers in the elementary school have more concern on the teaching & learning methods than those in the middle school in the process phase. Third, students and parents' satisfaction on the cognitive and affective domain in the elementary school is higher than that in the middle school in the output phase. This study suggests that these result has to be affected to make ways to apply the new curriculum, and the curriculum revision system has to be established to revise the curriculum as an important method of quality management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.939-948
• /
• 2005

In EBCOT, the context extraction process takes excessive calculation time and this paper proposed a method to reduce this calculation time. That is, if a coefficient is less than a pre-defined threshold value the coefficient and its descendents skip the context extraction process. There is a trade-off relationship between the calculation time and the image quality or the amount of output data such that as this threshold value increases, the calculation time and the amount of output data decreases, but the image degradation increases. Therefore, by deciding this threshold value according to the network environments or conditions, it is possible to establish a network-adaptive context extraction method. The experimental results showed that the range of the threshold values for acceptable image quality(better than 30dB) is from 0 to 4. The experimental results showed that in this range the Resulting reduction rate in calculation time was from $3\%\;to\;64\%$ in average, the reduction rate in output data was from $32\%$ to $73\%$ in average, which means that large reduction in calculation time and output data can be obtained with a cost of an acceptable image quality degradation. Therefore, the proposed method is expected to be used efficiently in the application area such as the real-time image/video data communication in wireless environments, etc.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.2
• /
• pp.97-102
• /
• 2007

[ $CO_2$ ] laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400um laser beam in rain focus sacred ground surroundings cellular tissue without vitiation me by evaporation Poe of very small floor as is clean steam can . Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of Pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can . Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.381-388
• /
• 2006

많은 6시그마 혁신을 하는 기업 중에서 IS09000 시리즈나 IS0/TS16949 인증을 받고 있다. 그럼에도 불구하고 6시그마 도입 초기부터 ISO/TS16949와 통합운영을 생각하고 추진하는 곳은 많지 않다. ISO/TS16949에서는 기업전반의 프로세스에 많은 중점을 두고 있다. 그 중에서도 APQP(Advanced Product Quality Planning)은 제품 초기에서 부터 명확한 품질계획 업무 프로세스를 가지고 활동을 하라는 필수 프로세스를 요구하고 있다. 그러나 구체적인 Flow나 단계는 각 기업체의 특성에 맞기고 있다. 6시그마의 Lean DFSS는 이러한 제품개발 프로세스의 구체적인 전개단계를 제공 하고 있다. 여기에 APQP에 서 요건으로 명시한 각 프로세스 단계마다 인풋(Input)요소, 아웃풋(Output) 요소, 타켓(Target), 그 프로세스를 책임질 구성원, 핵심성공요인(KSF), 핵심성공지수(KPI), 단계마다의 FMEA(Failure Mode Effect Analysis) 분석을 대응하면 도입 초기에서 부터 상호 유기적이면서 효과적인 System이 된다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.579-584
• /
• 2009

This paper describes a power quality analysis of a photovoltaic generating systems. Prior to the power measurement, domestic and foreign codes related to the photovoltaic generating systems were briefly summarized. After constructing about 5 kW photovoltaic systems, input/output voltages and currents were measured to compare and analyze the power quality by the module type. Based on the measured values, a couple of factors such as active power, power factor, total harmonic distortion(THD) was calculated and analyzed.

• International Journal of Quality Innovation
• /
• v.2 no.1
• /
• pp.106-116
• /
• 2001

The purpose of business strategy is to achieve competitive advantages which includes higher efficiency, better quality, more innovation and faster customer response. In other words, The business strategy is to build unique capability of lower cost and/or differentiation. In production aspect, unique capability means better production power with better performance at 3M(Man, Machine, Material) of input and PQCDSM (Product, Quality, Cost, Delivery, Safety, Moral) from output. The Total Productive management (TPM), a series of improvement activities focused on reduction of equipment loss, is a tool to establish business competitive advantages. In this paper, several domestic companies who won the Japan TPM Award have been studied. It is found that there is a strong cause-effect relationship between TPM and competitive advantages because. 1. TPM can change employees mindset effectively. 2. TPM can upgrade employees capabilities. 3. TPM can lead to excellent productivity.