• 문화기술의 융합
• /
• 제7권4호
• /
• pp.727-734
• /
• 2021

제 1기 신도시 중에서 분당신도시를 중심으로 거주자의 특성을 파악하고 설문조사를 실시하였으며 거주자의 신도시에 대한 인식을 분석하였다. 현장조사 대상지에서 육안검사와 일부 기기검사로 내구성을 평가하고 분석한 결과에 따르면 문제가 있는 것으로 나타났으며, 공동주택의 내구연한과 사용성능을 증진시키기 위하여 지속적인 유지관리를 하여야 한다. 특히 급격한 열화 진행 부분에서 나타나고 있는 많은 균열들을 조속히 보수하여야 하며 체계적인 계획을 입안하여 진행하여야 한다. 분당 신도시 거주자의 공동주택 인식조사에서는 약 93.4%가 보통 이상의 만족도를 나타내고 있었으며 43.4%는 거주 지역에 대하여 호감을 가지고 선호하는 결과를 나타내고 있다.

• 한국엔터테인먼트산업학회논문지
• /
• 제15권1호
• /
• pp.199-206
• /
• 2021

초고령 사회가 임박함에 따라 노인성 질환자 또한 증가하고 있으며 이로 인한 사회적 문제로 시설과 정책의 부족이 제기되고 있다. 의료보장의 현실적 대안으로 국민건강보험이 이야기되고 있으며, 요양병원은 급성기 병원과 장기요양시설 사이로 분류되며 의료비 절감의 대체재로 작용하고 있다. 그러나 유지기 재활의 핵심인 요양병원은 서비스의 질적 문제가 심각히 제기되고 있고, 현 의료체계의 문제로 재활 난민이 양산되는 문제가 있다. 특히 2015년 선행연구에서 전라북도의 요양병원 현황이 가장 열악하였으며 이에 공공데이터를 활용하여 전라북도 요양병원 일반현황, 다빈도 상병 현황, 재활서비스 관련 현황, 재활서비스 중 작업치료 관련 현황에 대하여 탐색하고자 한다.

• 한국재난정보학회 논문집
• /
• 제17권1호
• /
• pp.39-52
• /
• 2021

연구목적: 최근 시설물 점검 및 진단에 있어 활용되는 첨단장비들이 증가하여 첨단장비의 검·인증제도의 필요성이 대두되고 있다. 본 연구는 시설물 점검 및 진단에 활용되는 터널스캐너의 성능검증 방법론을 제시하는 것을 목적으로 한다. 연구방법: 시설물 점검 및 진단에 활용되는 첨단장비의 성능검증 사례를 조사하고 전문가 자문회의를 통해 터널스캐너 성능검증 방법론을 제시하였다. 연구결과: 본 연구에서 제안하는 터널스캐너 성능검증 방법론은 1차 평가와 2차 평가로 구성된다. 1차 평가지표는 최소요구성능을 기준으로 구성되고, 2차 평가지표는 터널스캐너의 품질에 관여된 지표들로 구성된다. 결론: 본 연구에서 제시한 터널스캐너의 성능검증 방법론은 장비 사용자에게 공인된 성능 카탈로그를 제공할 수 있으며, 장비 개발자는 장비의 공인된 검증을 받을 수 있어 부실한 유지관리를 예방할 수 있을 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.491-501
• /
• 2021

A difference in subgrade settlement between two rails of a track manifests as lateral differential subgrade settlement. This settlement causes unsteadiness in the motion of trains passing through the corresponding area. To illustrate the effect of lateral differential subgrade settlement on the dynamic response of a vehicle-track coupling system, a three-dimensional vehicle-track-subgrade coupling model was formulated by combining the vehicle-track dynamics theory and the finite element method. The wheel/rail force, car body acceleration, and derailment factor are chosen as evaluation indices of the system dynamic response. The effects of the amplitude and wavelength of lateral differential subgrade settlement as well as the driving speed of the vehicle are analyzed. The study reveals the following: The dynamic responses of the vehicle-track system generally increase linearly with the driving speed when the train passes through a lateral subgrade settlement area. The wheel/rail force acting on a rail with a large settlement exceeds that on a rail with a small settlement. The dynamic responses of the vehicle-track system increase with the amplitude of the lateral differential subgrade settlement. For a 250-km/h train speed, the proposed maximum amplitude for a lateral differential settlement with a wavelength of 20 m is 10 mm. The dynamic responses of the vehicle-track system decrease with an increase in the wavelength of the lateral differential subgrade settlement. To achieve a good operation quality of a train at a 250-km/h driving speed, the wavelength of a lateral differential subgrade settlement with an amplitude of 20 mm should not be less than 15 m. Monitoring lateral differential settlements should be given more emphasis in routine high-speed railway maintenance and repairs.

• 상하수도학회지
• /
• 제36권2호
• /
• pp.59-79
• /
• 2022

Conventional wastewater treatment plants (WWTPs) do not fully remove micropollutants. Enhanced treatment of sewage effluents is being considered or implemented in some countries to minimize the discharge of problematic micropollutants from WWTPs. Representative enhanced sewage treatment technologies for micropollutant removal were reviewed, including their current status of research and development. Advanced oxidation processes (AOPs) such as ozonation and UV/H₂O₂ and adsorption processes using powdered (PAC) and granular activated carbon (GAC) were mainly discussed with focusing on process principles for the micropollutant removal, effect of process operation and water matrix factors, and technical and economic feasibility. Pilot- and full-scale studies have shown that ozonation, PAC, and GAC can achieve significant elimination of various micropollutants at economically feasible costs(0.16-0.29 €/m³). Considering the current status of domestic WWTPs, ozonation and PAC were found to be the most feasible options for the enhanced sewage effluent treatment. Although ozonation and PAC are all mature technologies, a range of technical aspects should be considered for their successful application, such as energy consumption, CO₂ emission, byproduct or waste generation, and ease of system construction/operation/maintenance. More feasibility studies considering domestic wastewater characteristics and WWTP conditions are required to apply ozonation or PAC/GAC adsorption process to enhance sewage effluent treatment in Korea.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1103-1110
• /
• 2022

The old machine tools that have been used for a long time cause both increase in defective rate and decrease in productivity compared to new machines due to wear and failure of their components. In order to improve productivity and quality of machined components through remanufacturing, it is necessary to analyze the wear and failure of major components of old machine tools. In this study, the process for reverse engineering is designed for the remanufacture of planner millers, which belong to a very large machine tool. Also, the suitability of the designed process is verified through the analysis of the selected remanufactured components. In the first step of the process, some major components of the aging planner miller are scanned using a 3D laser scanner. In the next step, reverse engineering is performed using the data obtained through 3D scanning. Finally, wear and failure analysis is performed by comparing the reverse engineering data with the scan data. As a result, this reverse design and wear analysis can complement the insufficient design database and reduce costs in the maintenance of remanufactured products.

• 한국보건간호학회지
• /
• 제35권3호
• /
• pp.448-468
• /
• 2021

Objectives: This study aimed to understand the trends and issues of health-related intervention research using Intervention Mapping over the last ten years in South Korea. Intervention Mapping is a representative planning protocol to develop theory-and-evidence-based health promotion programs. Methods: The scoping review method was undertaken, and a total of 20 studies were analyzed using Intervention Mapping six steps. Results: The Korean health-related intervention studies using Intervention Mapping showed low methodological quality. In step 1, only 7 out of 20 studies organized a planning group consisting of various stakeholders. In step 2, about half of the studies did not present a matrix, which is the core essential component of Intervention Mapping. In step 5, only 1 out of 20 studies presented program adopters and maintainers. In step 6, most studies described effect evaluation relatively, but only one study mentioned process evaluation. Conclusions: In order to develop sustainable and cost-effective programs, systematic planning using Intervention Mapping is required from the research planning stage. In addition, a concrete and realistic plan needs to be established for the development of programs and adoption, dissemination and maintenance of programs.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.95-103
• /
• 2023

The domestic remanufacturing industry is concentrated in auto parts, so it is necessary to expand into various industries. In the domestic aluminum industry, the extrusion process accounts for more than 40% of the total, but the old and management of the extrusion equipment is not done properly. In particular, the extruder has a structure in which equipment is not replaced until major parts are damaged or worn, so there are problems such as lower process precision, productivity and production efficiency compared to new equipment, and high maintenance costs. In this study, the old extruder was remanufactured for major high-risk parts through Failure Mode and Effect Analysis(FMEA), and the process level and performance of the extruder were evaluated before and after remanufacturing. Compared to the existing extruder, the standard deviation of the remanufacture extruder was reduced by 93.5%, 57.9%, and 70.0%, respectively, in major process control items such as container temperature, billet temperature, and ram speed, keeping performance constant. In addition, it was possible to produce products with complex shapes that could not be produced before due to problems such as dimensional deviation within tolerances. In this study, remanufacturing guidelines were presented by analyzing the effect of failure modes of the old extruder, and the performance improvement of the extruder was confirmed.

• 토지주택연구
• /
• 제14권3호
• /
• pp.107-123
• /
• 2023

안전하고 쾌적한 교육환경 조성 및 교육 질 향상을 위하여, 2021년 「교육시설 등의 안전 및 유지관리 등에 관한 법률」이 제정되었다. 이에 따라 「교육시설 안전 인증 운영 규정」이 수립되었으며, 유치원, 초·중·고등학교 및 특수학교, 대학 및 기타 교육시설의 특성에 따라 3가지 유형으로 분류되어 평가되어진다. 기타 교육시설에는 도서관, 학생수련원이 포함된다. 하지만, 학생수련원, 도서관은 수련, 독서 등의 특수 활동이 발생하는 시설로 학교와 차이점을 두고 있다. 때문에 학생수련원 도서관 시설만의 특수성이 「교육시설 안전 인증 운영 규정」에 반영될 필요가 있다. 이 연구는 기타시설에 해당되는 학생수련원과 도서관의 특수성을 「교육시설 안전 인증 운영 규정」이 어떻게 반영하고 있는지에 대한 분석이 수행되었다. 선행 인증제도 및 가이드라인과 비교 분석되었으며, 현장 조사방법이 이용되었다. 최종적으로 도서관과 학생수련원에 대하여 각각 9가지의 세부 기준 검토가 필요한 것으로 확인되었다.

• 인간식물환경학회지
• /
• 제22권6호
• /
• pp.629-639
• /
• 2019

This study was conducted to analyze the characteristics of visitors to Hadong Bukcheon Iceland Poppy (BIP) Festival in order to sustain and enhance local flower festivals as a garden tourism. A questionnaire was distributed to BIP Festival visitors from May 18 to 27, 2018. A total of 167 responses were subject to be analyzed. Descriptive statistics analysis was mainly used and focused on describing the results in direct to explain the BIP Festival as a garden tourism. The number of female visitors and those in their 40s and 50s was high. Most of the visitors were found to live in other cities or counties near the area where BIP Festival was held and to prefer festivals held on the theme of nature and local features. The revisit rate and awareness of BIP Festival were 52.1% and 72.5% respectively. They mainly obtained the information on BIP Festival from people around them including family members, friends and colleagues, or from the Internet. Most answered that BIP festival was the most important destination on their trip. The major motives of BIP Festival visit included "spending quality time with family or friends (34.1%)", "appreciating Iceland poppy and gardens (25.6%)", and "enjoying oneself (tranquility, mental rest, etc.; 21.3%). As a companion, family and friends/colleagues accounted for 62.3% and 26.3% respectively. Most were found to spend 1-2 hours on visiting BIP festival and stay in Hadong county for a quarter of a day. In satisfaction of BIP Festival itself, "display and maintenance of Iceland poppy (3.76)" and "easiness of viewing (places arrangement, path, etc.) (3.57)" were high. In satisfaction of public relation and information, "service and hospitality of guides and desk clerks (3.66)" was high. The intention to revisit BIP Festival was nearly affirmative (3.73-3.80).