• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.484-492
• /
• 2012

The present study aimed to investigate the effect of static magnetic field (SMF) on the growth and physiological characteristics of common indoor plant species. Five foliage plant species, Spathiphyllum spp., Ardisia pusilla DC., Syngonium podophyllum, Peperomia pereskiifolia, and Pilea cadierei were potted into plastic pot equipped with round type anisotropic sintered NdFeB permanent magnet inside the pot. The surface magnetic flux density of each magnet was 3,500 G. After 6 months of growth period, the biomass accumulations of Spathiphyllum, A. pusilla, and P. cadierei under SMF were statistically higher than those of controls. Tissue water content also increased under the influence of SMF in most species. The photosynthetic rate of Spathiphyllum under SMF significantly increased but other species showed no significant difference compared with control. Although there was no significant increase in the photosynthetic rates of A. pusilla, and P. cadierei, they showed remarkable increase in total fresh weight under SMF. This suggests that the demand of assimilates for normal metabolism could be decreased under magnetic influence and thereby biomass accumulation could be more favored. But this is not always true for all plant species because P. pereskiifolia in this experiment, showed no changes in both photosynthetic rate and biomass accumulation. Leaf nitrogen and chlorophyll contents were enhanced significantly in most plant species under influence of SMF. Chlorophyll a/b ratio also increased by SMF. Although there might be a limitation depending on plant species, these results suggest that long-term exposure to SMF might allow plant to have an enhanced acclimation capacity against environmental fluctuations and optimal application of SMF could increase the practical use of indoor plants such as an attempt to improve indoor air quality.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.37-52
• /
• 2000

Generally speaking, the metropolitan agricultural regions have some advantages from the high accessibility to markets. But agriculture inevitably rests on the biological process. This study shows what characteristics of the agricultural management are found in these less favored metropolitan areas with bad natural conditions and how farm household live there. From the view point of farm household, the quality of labors they can get is quite low, and insufficient in quantity. The shortage of labor can be made up for the farming on Trust Farming System And the relatively less favored agricultural conditions prevent people from immigrating into these kind of areas, if they don't have any relationship with there. With bad natural conditions, the farm households usually cultivate relatively small areas for the purpose of self-sufficiency, and with smaller cultivating units(Baemi) of the land than in open fields. The scale of the agricultural management is largely affected by the ages of agricultural managers. The more aged the managers are, the smaller scale of the agricultural management. How to use lands is determined in accordance with the natural conditions such as percentage of sunshine and accessibility to drainage facilities -the two major factors- and more. Either owner-run farmlands or leased farmlands doesn't show any difference in each growing crops. Depending on the conditions of the lands, rice paddy is used for growing rice and field is used for growing self sufficient plants including vegetables for the farm household. Although the lack of infrastructure causes the inconvenience of living, and there exist less favored agricultural conditions, this kind of life and agricultural management style -self-sufficiency type- seems to be sustained quite longer. The less favored natural conditions for farming keeps the agricultural management style from being developed to be the level of commercialization. And the poor economic situation of farmers are continuing again and again. With the result of this study, there should be two conditions to be established previously if they want to develop these regions. First, each farm household should get to know of the importance of commercialization and try to spread it. The commercialization. should be attained through the expansion of the environmental friendly agriculture and the improvement of the previously established distribution system of the crops. Secondly, there should be a support from the government. The support will include the expansion of the infrastructures for fanning to improve the fanning conditions and the compensation system directly from the government to the farmers.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.446-455
• /
• 2015

Based on comparative studies on standards and grading procedures of machine graded lumber in Korea and other countries, this study proposed a procedure of determining the grade classification and design strengths of domestic machine graded lumber. Differences between machine stress rated lumber and E-rated laminations were detailed in order to clarify the need for the procedure improvement. To this improvement the use of average MOE requirement for grading was introduced instead of the fixed minimum MOE requirement which is currently used in the Korean standards. It was found that the fixed minimum MOE requirement method was easier for an inspector to grade but, less efficient as a strength predictor than the average MOE requirement method. The advantage of average MOE requirement method is statistically MOR-MOE regression-based MOR prediction and highly efficient in quality control though it requires a computer-aided operation system in an initial setup. A major weakness of the current Korean grading system was found that different strength characteristics depending on wood species were not reflected on the grade classification and the tabulated allowable design stress. The proposed procedures were developed taking advantages of respective merits of both methods and based on MOR-MOE regression analysis. Through this procedure, the grades of machine stress rated lumber should be revised to become interchangeable with E-rated lamination, which would be beneficial to the cost competitiveness of domestic machine graded lumber and glued laminated timber industry.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.122-129
• /
• 2008

The antioxidant and antimicrobial activities of pork patties supplemented with medicinal herb extract mix were investigated. The medicinal herb extract powder was mixed at a ratio of 48.5:48.5:3.0 for Morus alba L, Lonicera flos, and Coptis chinensis, respectively. The pork was prepared and supplemented with medicinal herb extract mix (0, 0.5, 1, or 2%) and the antioxidant and antimicrobial activities were tested during storage at $4^{\circ}C$. The pH value decreased during cold storage at $4^{\circ}C$ for allsamples, however the pH of samples supplemented with herb extract mix rapidly decreased by days 5 and 10 ($p{\leq}0.05$). The total phenol content in the pork patties with herb extract mix was higher than in the control patties. The ABTS+ radical scavenging activities increased with increasing concentrations of herb extract mix from 0.5% to 2%. In addition, pork patties supplemented with herb extract mix showed an approximately 1 decimal reduction in total aerobic counts. Therefore, the addition of herb extract mix into pork patties increased the antioxidant activity and slightly improved the antimicrobial activity of pork patties during cold storage. However, the levels of added medicinal herb extract mix should be considered prior to its use in order to maintain proper sensory acceptance.

• Asian Journal of Turfgrass Science
• /
• v.18 no.1
• /
• pp.37-46
• /
• 2004

The purpose of this study is to find the suitable putting green maintenance equipment for improving the quality of putting green. This study was carried out to investigate the green speed(i.e., ball roll distance) by different the types of greens mower(between work-behind greens mower and riding greens mower), the types of reel blades(between 9 blades and II blades) and the types of roller(between riding soil sprayer and lightweight roller). Green speed of golf course putting greens is assessed by use of Stimpmeter. The west course of Lakeside Country Club was selected for the case study. The results are summarized as follows; 1. The green speed was faster in 3.8 mm moving height treatment plot using work-behind greens mower than in 3.8 mm moving height treatment plot using riding greens mower right after the moving and even after eight hours had passed, and it was statistically significant at a 95% confidence level. Therefore, work-behind greens mower was judged to be a proper equipment type for the fast green management practice than riding greens mower. 2. The green speed was faster in 3.2 mm mowing height treatment plot using work-behind greens mower equipped with II blades than in 3.2 mm mowing height treatment plot using work-behind greens mower equipped with 9 blades, and this result was statistically significant at a 95% confidence level. Therefore, II-blade was judged to be a proper blade type for the fast green management practice than 9-blade. 3. The difference in green speed (green speed increased after rolling) between a treatment plot mowed at 3.0 mm mowing height with the work-behind greens mower and then rolled a single time with riding soil sprayer and a treatment plot mowed at 3.0 mm mowing height with the work-behind greens mower and then rolled once with lightweight roller was not statistically significant at a 95% confidence level. However, the difference in green speed (green speed decreased after rolling) between two treatment plots measured after eight hours had passed was statistically significant at a 95% confidence level. Therefore, the lightweight roller was judged to be a proper roller type for the fast green management practice than the riding soil sprayer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.3
• /
• pp.426-434
• /
• 2011

In order to increase the use of rice, ginseng Garaedduks and Topokki were made and the physicochemical and sensory properties were investigated. Topokki and Garaedduks were added with 0, 1, 3 and 5% ginseng powder and stored at $20^{\circ}C$ for 48 hours. The moisture contents were not different to the increasing amount of ginseng powder and increasing storage time for 48 hours. The moisture content of Garaedduks for control and 5% added ginseng powder were 48.08% and 49.62%, respectively. The L value in color of uncooked ginseng Garaedduk decreased according to the added amount of ginseng powder, and the b value in color increased significantly according to the added amount of ginseng powder and during 48 hours storage at $20^{\circ}C$. Textural analysis, measured using a texture analyzer, of Garaedduk revealed that hardness, cohesiveness, chewiness decreased significantly and adhesiveness increased according to the added amount of ginseng powder. In sensory evaluation, 5% ginseng Garaedduk (uncooked, cooked) scored higher in overall acceptability than those of the other samples. In cooking properties, water absorption and solid contents increased according to the added amount of ginseng powder. Therefore, Garaedduk containing 5% ginseng powder was the most preferable. These results implied that the degree of retrogradation of ginseng Garaedduk might be low due to its high dietary fiber content.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.40-53
• /
• 2017

The purpose of this study was to evaluate the effects of container types on physiological characteristics of Zelkova serrata, Fraxinus rhynchophylla and Quercus serrata in the container nursery stage. We used 16 container types [4 growing densities (100, 144, 196 and $256\;seedlings/m^2$)${\times}4$ cavity volumes (460, 380, 300 and $220cm^3/cavity$)] and performed two-way ANOVA to test the differences in photosynthesis, photochemical efficiency and chlorophyll content among container types. Also, multiple regression analysis was conducted to correlate container dimensions with photosynthetic rate. Container types had a strong influence on photosynthesis of three species seedlings. Growing densities and cavity volumes had a significant interaction effect on photosynthetic rate, water use efficiency, stomatal conductance and chlorophyll contents except stomatal conductance of Q. serrata. In all three species, however, interactions between the two factors of container type were not found with regard to photochemical efficiency. Growing density was negatively correlated with photosynthetic rate of F rhynchophylla and Q. serrata, while cavity volumes positively affected on those of three species seedlings. The range of optimal container types was determined by multiple regression analysis based on photosynthetic rate. Consequently, optimal growing density and cavity volume of container by each tree species were found to be approximately $160{\sim}210\;seedlings/m^2$ and $430{\sim}460cm^3/cavity$ for Z. serrata, $130{\sim}150\;seedlings/m^2$ and $390{\sim}440cm^3/cavity$ for F. rhynchophylla and $130{\sim}170\;seedlings/m2$ and $420{\sim}460cm^3/cavity$ for Q. serrata, respectively. Application of adequate container will induce higher quality seedling production in nursery stage, which will also increase seedling growth in plantation stage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.92-99
• /
• 2000

To compare the effect of food waste compost(FWC) application on the sodicity of paddy and upland soil, laboratory experiment was conducted. Six kinds of FWC made of various mixing ratio of food waste and pig slurry as raw material were applied to paddy soil under submerged condition and to upland soil in field water capacity, and were kept at $25^{\circ}C$ under laboratory incubation. The higher the mixing ratio of food waste on making FWC, the higher the FWC showed Na content and EC. Mineralized ratio of cations in FWC during incubation showed no difference between paddy and upland soil. It was high in the order of Na>K>Mg>Ca as 99, 94, 71, and 71%, respectively. NaCl contents of FWC applied to soils against SAR and ESP were fitted well to first linear regression with extremely high significance($R^2=0.99$). Increasing rate of SAR and ESP was higher in upland soil than paddy soil by 2.3 times. The difference was considered to be caused by dilution effect which was exerted by the application of more soil to water ratio to paddy soil than to upland soil on SAR analysis in consideration of cultivating condition. The calculated values of $([Ca^{2+}+Mg^{2+}]/2)^{1/2}$ used as a denominator on SAR calculation showed a little difference among FWC treatments by 2.1~2.4, while [$Na^+$] used as a numerator showed much variance by 3.1~9.5. Therefore, as a parameter for the assessment of FWC quality affecting soil sodicity, the use of only Na content in FWC was proposed without regarding Ca and Mg contents. Soil Ex. Na contents showed extremely high correlation($R^2=0.99$) with ESP. Moreover, because the former can be more easily determined than the latter, soil Ex. Na content was proposed as a new sodicity index.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.308-312
• /
• 2015

This study was aimed to evaluate the effects of tramadol hydrochloride on the minimum alveolar concentration of isoflurane ($MAC_{ISO}$) in dogs. Six healthy, female German shepherd dogs (aged 1-2 years) were used in this study. Anesthesia was induced by mask induction and maintained with isoflurane in oxygen. Mechanical ventilation maintained the end-tidal $CO_2$ partial pressure ($P_{ET}CO_2$) from 35 to 45 mmHg throughout the study. A baseline $MAC_{ISO}$ ($MAC_{ISO}B$) was determined starting 45 minutes after induction of anesthesia by clamping a pedal digit until gross purposeful movement was detected. After $MAC_{ISO}B$ determination, dogs received a tramadol loading dose of 3 mg/kg followed by a continuous rate infusion (CRI) of 2.6 mg/kg/h. The determination of $MAC_{ISO}$ after administration of tramadol ($MAC_{ISO}T$) began 20 min after the start of the CRI. Arterial blood pressure and heart rate were recorded continuously and arterial blood samples for blood gas analysis were collected at the end of the equilibration period. Mean ${\pm}$ SD values for the $MAC_{ISO}B$ and $MAC_{ISO}T$ were $1.33{\pm}0.04%$ and $1.23{\pm}0.04%$, respectively. The $MAC_{ISO}B$ decreased significantly by $7.5{\pm}0.2%$ (P < 0.05) after administration of tramadol. The mean heart rate and arterial blood pressure of six dogs were not changed significantly after tramadol administration. The blood gas levels remained constant during the study. In conclusion, tramadol could significantly reduce $MAC_{ISO}$ without depression of cardiorespiratory function. Thus, the use of tramadol on inhalation anesthesia with isoflurane in dogs can improve the stability of anesthesia and the quality of recovery.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.3-11
• /
• 2015

Purpose It is hard to obtain high quality images of knee and T.M joint because of a lot of soft tissues in the knee and T.M joint area. Most conventional system for high resolution scintigraphy was used by 4 mm aperture pinhole collimator. Performance comparison of high-resolution pinhole SPECT for Micro deluxe phantom using conventional system. the aim of this study is to evaluate performance of each aperture according to the diameter size and the usefulness of 24-hour delayed bone scintigraphy. Materials and Methods In this study 6 mm, 8 mm diameter pinhole collimators were mounted on Siemens E.CAM systems. In order to evaluate performance evaluation of each aperture and Micro Deluxe phantom was used for performance comparison of conventional SPECT system, Projection data were obtained with 9 degree increment per 30 second. Transverse images were reconstructed using dedicated OSEM algorithm with recovery of detector blurring. $^{99m}Tc-HDP$ source was used for 24-hour delayed bone scintigraphy. Results The knee joint images obtained with 24-hour delay were improved more than those obtained with 3-hour delay in our study. The 6 mm and 8 mm pinhole collimators FWHM have improved by 28% SNR and Uniformity have improved by 35%, Contrast has improved by 7% in 24-hour delayed knee joint image. While in 24-hour delayed T.M joint image of the 6 mm and 8 mm pinhole collimators FWHM have decreased by 60% SNR has decreased by 20% and Uniformity has decreased by 25%, Contrast has decreased significantly. Conclusion Pinhole collimators with 6 mm and 8 mm diameter could offer a superior performance for 24-hour delayed bone scintigraphy. The use of 24-hour delayed image provides additional benefits for pinhole scintigraphy of knee joint. Therefore, we expect that it is useful for precise diagnosis of knee joint and it is applicable to others joint imaging.