• Journal of Digital Convergence
• /
• v.19 no.8
• /
• pp.249-255
• /
• 2021

This study proposed a method for determining weights for the eight quality characteristics, such as functionality, reliability, usability, maintainability, portability, efficiency, security, and interoperability, which are suggested by international standards, focusing on software test reports. Currently, the test results for software quality evaluation apply the same weight to 8 quality characteristics to obtain the arithmetic average. Weights for 8 quality characteristics were applied using the results from text analysis, and weights were applied using the results of text analysis of test reports for two products. It was confirmed that the average of test reports according to the weighted quality characteristics was more efficient.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.55-64
• /
• 2009

Recently, concrete track is replacing ballast track for efficient and economic maintenance of track. It considerably offer less maintenance, a longer service life and reduced life-cycle costs. With the aim of achieving high-quality track construction work, of developing tools for quality assurance in new construction and for later technical inspection of material condition, a quality strategy has to be developed. For these purpose, NDT which is using the seismic wave has carried out in situ studies in the test construction section. The used NDT are SASW test, impact echo test and continuous impact echo test. The test is performed 5,353 times on 49 pre-cast concrete track panels to verify the stiffness structure and grouting efficiency of the track structure. To conclude, because of the non-homogeneous characteristic of concrete material. it is restricted to apply the elastic wave test at some aspect. However it is possible to acquisite a sufficient reliability about structural stiffness and grouting efficiency of concrete track.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.11-17
• /
• 2012

Network security performance evaluation is a complex and diverse system environments, a single, specific performance measurements alone performance evaluation measure itself and the meaning of the reliability of the evaluation results do not limit the number of days only. In this paper, we propose a method to measure the security features of security, QoS measurement techniques using MOS satisfaction. MOS(Mean Opinion Score) Rating specifications for network security, QoS satisfaction and how to operate the development and operational model for future customer's satisfaction for information systems that can be used to evaluate the QoS measurement/analysis be utilized in the field. Objectified in the form of standards and performance measurement system provider (supplier development) and consumers(users) all the results available so that how to develop a system. Development is the development of information security features, the performance of these two features networking capabilities and a comprehensive evaluation of a three-gaeyoungyeok Correlating performance measurement methodology. Systematic measurement environment designed using the proposed methodology of this study, when the operating system is on the satisfaction of the security, QoS can be calculated. Forward In addition, a variety of performance metrics and performance measurement methods by extending the network security system satisfaction rating upgrade by the way will be.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.97-104
• /
• 2010

At present, the biological nutrient removal (BNR) process for removal of nitrogen and phosphorus is being constructing to keep pace with the reinforced standard of effluent quality and the traditional activated sludge process of preexistence is being promoting to retrofit. At the most case of retrofitting, processes are subjected to be under consideration as alternative BNR process for retrofitting. However, process evaluation methods are restricted to compare only treatment efficiency. Therefore, when BNR process apply, process evaluation was needed various method for treatment efficiency as well as sludge production and aeration cost, and all. In this study, the evaluation method of alternative process was suggested for the case for retrofitting S wastewater treatment plant which has been operated the standard activated sludge process. Three BNR processes for evaluation of proper alternatative process were selected and evaluated with suggested method. The selected $A^2$/O, VIP and DNR processes were evaluated using the mathematical model which is time and cost effective as well as gathered objective evaluation criteria. The evaluation between 5 individual criteria was possible including sludge production and energy efficiency as well as treatment performance. The objective final decision method for selection of optimal process was established through the fuzzy inference.

• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.193-210
• /
• 2018

Purpose: The purpose of this study is to escape from the existing defense quality policy focused on government-led quality assurance for mass-produced items and to secure quality reliability of weapon systems through a defense quality policy paradigm shift based on designing a verification systems anchored on reliability through the enhancement of military supply quality control in the development stage, the enhancement of quality responsibility of the manufacturing contractor and other methods. Methods: For the shift to the quality-based defense quality policy, the status and the problems of the status quo are analyzed and the direction of future defense quality policy is suggested based on literature review of the concept of reliability and reliability in the field of defense, on case studies of global corporations and their quality policies, on the background on quality assurance in defense, and on case studies of quality policies in other government organizations, Results: Based on the case studies of quality policies in global corporations and other government agencies, the importance of preventive quality control from the early development stages, quality control based on the reliability of the materials and parts, and shift of the quality policy to a certification system to achieve these objectives were highlighted. Conclusion: To secure reliability of weapon system quality, the quality policy must be shifted to a system focused on reliability-based design and verification and there is a further need to enhance the operational efficiency and capacity of DTaQ based on studies and evaluation of weapon system reliability.

• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.65-74
• /
• 2003

The purpose of this study Is to find out the design guideline for women's hospital focusing on the patient needs. The results of research are as follows: 1) As a basic frame of evaluation model, the quality of service of medical facilities and patients' reaction to the physical environment are fixed as a variable called' satisfaction degree'. This study analyzes the influence on space efficiency evaluation according to the difference of types through basic model (Model I-1,2) as verification model to identify the difference between satisfaction degree of outpatients and that of inpatients. 2) The difference of satisfaction degree about the hospital facilities by space evaluation matrix is according to the types of inpatients and to space importance. 3) The control of importance degree about the interior facilities of the hospital according to the specific character of the hospital is necessary. Maintenance of the status quo, or reduction, or expansion is needed according to the satisfaction degree corresponding to the importance degree. Finally, the model is used to for the planning & design for the future women's hospital.

• Journal of Korean Library and Information Science Society
• /
• v.38 no.4
• /
• pp.441-462
• /
• 2007

As country try expand R&D investment and enhance its efficiency to improve the national competitiveness, research is needed to conduct qualitative enhancement and derive progressive future strategy in relation to the academic information distribution project in scientific technology field. In this study, BSC-based performance indicators were applied to an institute that is the representative of domestic academic information distribution institutes in the field of scientific technology to evaluate project performance, and then to analyze portfolio of using such evaluation results. As for the items of evaluation for the performance indicators of academic information distribution project in the scientific technology field, 12 items that includes information resource quality, information service quality, user satisfaction and economically useful value of academic information from four(4) viewpoints such as information resource, information service, user and economic viewpoints. In the portfolio analysis, it was conducted by performance indicators and by elements of the individual performance indicators as well. Based on the results of performance evaluation and portfolio analysis, the improvement method by viewpoints on academic information distribution project of an institute was suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_2
• /
• pp.611-623
• /
• 2013

Point cloud data (i.e., LiDAR; Light Detection and Ranging) collected by Airborne Laser Scanner (ALS) system is one of the major sources for surface reconstruction including DEM generation, topographic mapping and object modeling. Recently, demand and requirement of the accurate and realistic Digital Building Model (DBM) increase for geospatial platforms and spatial data infrastructure. The main issues in the object modeling such as building and city modeling are efficiency of the methodology and quality of the final products. Efficiency and quality are associated with automation and accuracy, respectively. However, these two factors are often opposite each other. This paper aims to introduce correction scheme of incorrectly determined Model Key Points (MKPs) regardless of the segmentation method. Planimetric and height locations of the MKPs were refined by surface patch fitting based on the Least-Squares Solution (LESS). The proposed methods were applied to the synthetic and real LiDAR data. Finally, the results were analyzed by comparing adjusted MKPs with the true building model data.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.103-116
• /
• 1994

This study was conducted to evaluate accuracy and precision of reference values used for quality control of the Korean industrial hygiene laboratory for three rounds. Factors affecting on accuracy and precision, including analytical procedures, were investigated. The results are summarized as follows. 1. Pooled relative standard deviation of reference values analyzed by reference laboratories was 2.01-5.91%, and that by both reference laboratories and participated laboratories was 3.18-6.63%. Better results were obtained when results of reference laboratories were employed. 2. Significant relationship was indicated between analytical precision and concentration of materials in samples. Variation increased by decreasing sample concentration. 3. Recoveries of lead and cadmium were about 98.6% and 99.8% respectively. There was a significant difference between lead values with and without recovery correction. 4. Organic solvent results corrected by desorption efficiency only and those corrected by Both internal standards and desorption efficiency were more accurate than those uncorrected. But, the latter was the best.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.4
• /
• pp.597-604
• /
• 2011

This study was performed to compare finished water quality among three different processes. A detailed assessment of performance was carried out during the five months of operation. Finished water quality was evaluated on the basis of parameters such as Dissolved organic carbon (DOC), $UV_{254}$ absorbance, haloacetic acid formation potential (HAAFP), geosmin, 2-methylisoborneol (2-MIB), heterotrophic bacteria and total coliform bacteria. The treatment processes were Process 1 (coagulation-flocculation-sedimentation-sand filtration-ozone-GAC), Process 2 (coagulation-flocculation-sedimentation -microfiltration-ozone-GAC), and Process 3 (coagulation-flocculation-sedimentation- sand filtration-GAC), compared side by side in the pilot testing. Process 2 was found to have better removal efficiency of DOC, $UV_{254}$ absorbance, HAAFP and heterotrophic bacteria in comparison with process 1 and process 3 under identical conditions. Geosmin, 2-MIB and total coliform bacteria were not detected in finished water from each process.