• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.1-5
• /
• 2008

The purpose of this study is to ensure an amicable material quality control in the construction site through investigating a process which can impact the construction material quality. For it, a worker interview and questionnaire survey was conducted through a direct field visit. The visited construction sites are composed of 79% construction site and 21% engineering site. As the respondents of questionnaire survey, the quality control workers were 72% of total respondents. Next, the construction worker, handymen, field representatives and others formed 7%. The interview with the quality control staff was conducted with the items including the construction site quality control guide, incoming inspection and material management. Through this survey, the problems of quality control by progress phase were derived. It could be known that the management and measures by each phase were urgently required. It also was indicated that a selection of low-priced material caused by low price bidding could badly impact the construction and safety. Also, in relation to the opinions such as the insufficient quality control and heavy work-load, the improvements are required. For the effective quality control in the construction site, the material quality control procedures suitable for the phase of construction progress must be presented in the present quality control. Also, the standards for it need to be established.

• 품질경영학회지
• /
• 제29권4호
• /
• pp.38-53
• /
• 2001

In resolving industrial quality control problems, a vector of multiple quality characteristic variables is involved rather than a single variable. However, it is not guaranteed that a multivariate control chart based on statistical methods can monitor abnormal signal in case that small changes of relationship between each variables causes abnormal production process. Hence a quality control system for real-time monitoring of the multi-dimensional quality characteristic vector under a multivariate normal process is needed to enhance tile production system quality performance. A pattern analysis approach based on self-organizing map (SOM), an unsupervised learning technique of neural network, is applied to the design of such a quality control system. In this study we present a new material quality control system based on pattern analysis approach and illustrate the effectiveness of proposed system using actual electronic company material data.

• 핵의학기술
• /
• 제21권1호
• /
• pp.60-64
• /
• 2017

검사의 질 향상과 국제표준화의 상용화 정도관리물질을 이용한 Westgard multi-rules 적용의 유용성은 이미 알려져 있다. 그러나 핵의학 체외검사의 특성상 정도관리물질과 환자검체의 동시 계측으로 인한 측정횟수의 증가에 따라 Westgard multi-rules법을 적용함에 있어 어려움이 있다. 이에 본 연구는 핵의학 체외검사에서 상용화 정도관리물질을 이용한 Westgard multi-rules 적용의 유용성과 보완, 개선을 통해 내부정도관리의 효율성 향상을 조사하였다. 2013년 01월부터 2016년 06월까지 삼성서울병원 핵의학과 체외검사실 통합의료시스템에 기록된 총 282건의 적용된 계통오차 multi-rules (22s, 101s)과 117건의 조치사항 기록을 분석하였다. 조치사항은 multi-rules 중 계통오차의 규칙이 적용 되었을 때 기록하는 원인분석으로 정도관리물질 오류, 실험과정 오류, 검사키트 로트번호 관리 오류, 기타 등 총 4개의 대분류로 구성하였다. Westgard multi-rules 적용을 통해 조치사항을 분석한 결과 정도관리물질 오류가 62건, 실험과정 오류가 24건, 검사키트 로트번호 관리오류가 18건, 기타 13건으로 분류되었다. 정도관리물질 오류를 방지하고자 개선사항으로 기존에 각 검사자마다 사용하던 방식을 담당자 지정 방식으로 변경하여 모든 검사의 하루 소비량을 분주하여 공동사용을 하였고, 나머지 오류를 방지하고자 검사 전후 모든 과정을 표준화 하여 검사실내 어느 검사자가 시행 하더라도 일원화할 수 있게 하였다. 정도관리물질 오류를 개선한 결과 해동 후 2일 이내 신선한 물질을 사용 가능하였고 같은 물질을 사용하는 검사끼리 비교가 가능해져 물질에 의한 오류인지 명확해짐으로 계통오차 발생원인이 정도관리물질 오류로 기록하는 건수가 줄어들었다. 또한 정도관리물질의 로트번호 변경 시 교체시기가 같아 관리가 용이해졌고, 물질 사용량의 감소로 경제적 효과를 얻을 수 있었다. 그리고 검사표준화 적용 후, 계통오차의 규칙인 22s와 101s의 발생건수가 개선 전 보다 월 평균 2건 이상 줄어드는 결과를 보였다. Multi-rules의 적용을 통한 계통오차의 빠른 확인을 위해 정도관리물질의 체계적인 관리와 목표값과 표준편자의 설정 및 관리가 바탕이 되어야하며, 계통오차 발생 시 검사의 원인분석을 통한 조치사항을 기록하는 것이 중요함을 확인하였다. 본 실험의 결과로 Westgard multi-rules 적용 분석을 통해 발생 오류의 기재와 원인을 효율적으로 분석함으로써 핵의학 검사 내부정도관리의 질적 향상과 정확하고 신속한 결과보고에 기여할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.47-52
• /
• 2000

Recently, it is very necessary the development of the manufacturing techniques for high strength concrete(HSC) for the large-scale size and good quality of civil structure. But, the manufacture and quality control of HSC of which shrinkage, heat of hydration and workability at construction filed are considered, is very difficult due to its low water-cement ratio and high quantity of unit cement content. In the present study, we tried to know and assess the influences of chemical and physical properties of cement on the material properties of HSC. We analyzed basic properties of 4 kinds of cement whose chemical and physical properties are different each other through various tests such as chemical analysis and mortal test. Also, we performed the assessment of the material properties of HSC for each dement by the test for the conditions of same mix design and similar compressive strength. From the results in the study, the assessment of the important quality factors of cement influencing the properties of HSC may be utilized to quality control of applied cement to manufacture the HSC of high quality.

• 한국조리학회지
• /
• 제6권1호
• /
• pp.151-175
• /
• 2000

In hotels or Food service industrials they make efforts on cost control. In the modern time how to control costs of food materials are perceived to be important even if there are many ways of cost control. Ideas that the cost of food material should be accounted have been change to that the cost of food material should be controlled. change of thought and the spread-over of computer give us the means of effective cost control over the processes of buying, controling, selling food materials. Even if stocked in good places, the food materials are changing in quality from the first time they are stocked. the storage control give us the least loss of this damages and make us to provide customers progressive food services in quality rather than the past. we can make plans to save costs corresponding to take various way of buying suitable to various situation.

• 핵의학기술
• /
• 제19권1호
• /
• pp.44-50
• /
• 2015

Purpose Quality control used in laboratory help to sustain precision and accuracy consistently to ensure the Diagnostic and treatment for medical employee. To perform an evaluation in statistical manner, it is recommended to use different quality control material than calibrator from manufacturer, quality control material must include analyzed concentration perimeter, must use more than two different concentration materials and recommended to use materials to indicate the concentration in clinical use. However, currently used quality control material has limit of evaluation due to unconsidered concentration or improperly used to get clinical importance data. Therefore, we compared the value of quality control, DIACON Hormone Level 1, 2, 3 (Scantibodies, USA) and DIACON Tumor Level 1, 2, 3 which applied to clinical concentration range. Materials and Methods DIACON Hormone Level 1, 2, 3 (Scantibodies, USA) and DIACON Tumor Level 1, 2, 3 (Scantibodies, USA) that used materials and methods test to compare the result from five RIA testing institution and one institution that used Elecsys (ROCHE) and Architect (ABOTT) for each level. The reagent RIA kit that used in this experiment is followed by Table 2 and 3. Test has performed by instruction itself and follow by instruction. Results Among DIACON hormone result of twenty four items, level 1 have three items, level 2 have four items and level 3 have five items were out of manufacturer set up range based on the average value. Among DIACON tumor result of thirteen items, level 1 have three items, level 2 have four items and level 3 have five items were out of manufacturer set up range. Other result were inside of manufacturer range. Conclusion For quality control material, it is widely available in market, but it is limited for normal range which is only concerned in improper clinical value and difficult to evaluate important concentration area in terms of clinical analyze. In this experiment, we evaluate Hormone twenty three items and Tumor thirteen items with DIACON Hormone and Tumor (Scantibodies, USA) to resolve this limit and we could observe that it ca be substituted and used.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.1-6
• /
• 2017

Process capability is well known in quality control literatures. Process capability refers to the uniformity of the process. Obviously, the variability in the process is a measure of the uniformity of output. It is customary to take the 6-sigma spread in the distribution of the product quality characteristic as a measure of process capability. However there is no reference of process capability when maximum material condition is applied to datum and position tolerance in GD&T (Geometric Dimensioning and Tolerancing). If there is no material condition in datum and position tolerance, process capability can be calculated as usual. If there is a material condition in a feature control frame, bonus tolerance is permissible. Bonus tolerance is an additional tolerance for a geometric control. Whenever a geometric tolerance is applied to a feature of size, and it contains an maximum material condition (or least material condition) modifier in the tolerance portion of the feature control frame, a bonus tolerance is permissible. When the maximum material condition modifier is used in the tolerance portion of the feature control frame, it means that the stated tolerance applies when the feature of size is at its maximum material condition. When actual mating size of the feature of size departs from maximum material condition (towards least material condition), an increase in the stated tolerance-equal to the amount of the departure-is permitted. This increase, or extra tolerance, is called the bonus tolerance. Another type of bonus tolerance is datum shift. Datum shift is similar to bonus tolerance. Like bonus tolerance, datum shift is an additional tolerance that is available under certain conditions. Therefore we try to propose how to calculate process capability index of position tolerance when maximum material condition is applied to datum and position tolerance.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.57-63
• /
• 1999

This study was carried out to analyze the relationship between basic physical properties and acoustical characteristics of imported violin wood and to offer the information on raw material procurement and incoming-material quality control to domestic violin makers which have purchased most raw materials from European exporting countries at high expense. Equilibrium moisture content of European spruce with lower specific gravity after the prolonged storage was rather higher than that of European maple with higher specific gravity. The specific gravity of spruce increased with decreasing annual ring width, however, that of narrower annual ring. Increasement in specific gravity enhanced the dynamic Young's modulus of both wood species, but influenced the vibration energy loss by internal friction differently between two species. For dynamic MOE, qurater-sawn spruce was higher than the flat-sawn, but maple showed the reverse directional characteristics. Consequently, it would be well for violin makers to establish the standard for materials and quality control system to assure the quality of their violin products.

• 한국농공학회지
• /
• 제33권4호
• /
• pp.84-95
• /
• 1991

The compaction ratio of the field dry density to the maximum dry density is generally adopted as the index of quality control for embankment of earthfill structures such as Earth Dam, Sea Dike, River Bank and Road. In case of coarse materials are included in the earth material, the compaction ratio will be varied in wide range since the dry density is influenced by quantity of coarse material in the soil. The treatment for the coarse material should be controlled carefully in testing. In this study, the compaction characteristics of the soil contained the coarse materials were researched and calibration of the suitability of field quality control methods were carried out. 28 Samples were made of clay(CL) and sandy soil (SM) mixed with gravel whose content were 0, 4, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, and 60% in Weight. The compaction characteristics depending on the coarse material content were analysed through 4 types of compaction tests which are A-1, B-i, C-i and D-1. The adjusting coefficients for density and moisture content namely a and ${\beta}$ respectively were proposed in order to consider the effects depending on content of the coarse materials. The test methods to control reasonably and promptly the quality of earthfill were proposed after analysing the ranges of possible errors on the relative compaction ratio between laboratory compaction methods and field density testing methods.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.123-130
• /
• 2010

Indoor air quality has attracted great attention in recent years and thus the importance of managing finishing materials in terms of pollutant source control is being emphasized. Managing the finishing material at the design stage maximizes the efficiency of IAQ control at the following construction stage. However, there are insufficient investigations on the application of a specific finishing material management process, a database management system or a finishing material management process network. As a result, the main purposes of this study comprise comprehensive evaluation of IAQ performance from the selected finishing materials and auxiliary materials, application of the material management system basing on the types and characteristics of toxic substances generated from the indoor finishing materials, investigation of IAQ evaluation standard, and the overall IAQ evaluation method for the design parts. The result of this study will be the basic data to construct DBMS for management of finishing materials with respect to IAQ.