• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.643-652
• /
• 2000

In this paper, we analyze the BER performance of OFDM/QPSK system in frequency selective Rayleigh fading channel with impulsive noise and improve its performance by adopting convolutional coding. When the channel delay time is shorter than the guard band, the OFDM/QPSK system shows a good BER performance while, when the channel delay time becomes longer than the guard band, its BER performance is abruptly degraded. Moreover, when the transmitted signal is contaminated by a strong impulsive noise in the channel, the BER performance falls to about $10^{-1}$. Also, without channel coding technique, the system doesn't meet even the voice service requirement while it meets the data service requirement with convolutional coding in frequency selective Rayleigh fading channel with impulsive noise.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.384-388
• /
• 2003

In this paper, we have proposed a OFDM/QPSK-DMR(Orthogonal frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band-limited pulse shaping filter) over the Microwave channel. In the proposed DMR system, STS-1(51.84 Mbps) of SONET(Synchronous Optical NETwork) is first modulated by OFDM/QPSK symbol and used Band-limited pulse shaping filter. The advantage of the proposed DMR system is to simplify system complexity and increase IFFT/FFT block use-efficiency. The system performance of single carrier and OFDM systems is already proved that those of DMR systems have the same performance over AWGN(Additive White Gaussian Noise) channel environment. Therefore, the system is analyzed between proposed OFDM/QPSK-DMR and single carrier DMR systems and simulated by BER performance and Signature curve over Microwave channel environment. Simulation result is that the proposed system performances are approaching to the performance of single carrier DMR system as the number of Sub-carriers increasing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.817-826
• /
• 2001

In this paper, we implemented QPSK(Quadrature Phase-Shift Keying) modem which is widely used for communication systems, using a general Digital Signal Processor(DSP), TM320C31. Up to now, almost all of communication systems consist of hardware. However, the implemented system herein is composed of software and hardware part. Software part includes the modulation process, before passing D/A(Digital-to-Analog Converter) and the demodulation process, after passing A/D(Analog-to-Digital Converter) in IF(Intermediate Frequency) node. Hardware part is related to input, output and process of signal. To demonstrate the successful implementation of modem, the output results obtained from DSP processor are compared with the simulated result on the personal computer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.283-286
• /
• 2003

In this paper, we represent an implementation of burst QPSK receiver for underwater acoustic communication. Transmitter sends 5,000 symbols at 25kHz frequency with 200 kHz D/A sampling rate. The received signal is sampled at 100 kHz. Implemented receiver acquires the frame synchronization, coarse symbol timing estimate, and coarse phase offset estimate using 32 symbol length preamble. The estimated phase offset is used to initiate of 2nd order PLL. The transmission experiment results show that PLL is a mandatory to compensate Doppler shift due to the variation of tidal current.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.33-40
• /
• 2011

In this paper, underwater acoustic communication experiment was carried out to test a performance of single carrier digital modulation schemes. The communication experiment was performed at real sea and tested modulation schemes are ASK, FSK with non-coherent detection and QPSK with coherent detection. A modulated image data was transmitted with data rates of 600bps~3Kbps. From the results of BER of the demodulated signal, ASK and FSK show the achievable BER of $10^{-3}{\sim}10^{-4}$ without compensation techniques and QPSK show that of $10^{-4}$ with linear equalizer.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.8
• /
• pp.462-468
• /
• 2005

In this paper, we present a frame synchronization scheme for high oversampling rate based QPSK receiver system in the underwater acoustic burst transmission. The proposed frame synchronization scheme determines the frame synchronization by comparing a threshold value with the correlation between the received symbol sequence and rotated 16-symbol length CAZAC sequence, which is made by dividing into two 8-symbol length sequences and then concatenating the latter sequence and the former one. If the correlation value is bigger than the threshold value, the frame detector determines that the frame synchronization is achieved at that sample. Also, the approximated performance of designed frame detector is derived and it is well fit the simulated result.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.325-332
• /
• 2004

In this paper, we propose a new DSSS-QPSK baseband modem receiver structure. A general receiver consists of matched filter, do-spreader, and DLL(Delay Locked Loop). In this paper, the matched filter plays a role of the do-spreader using the structure similarities between the matched filter and the de-spreader. As a result of the new receiver architecture, we can reduce the computational expenses and get the simpler receiver structure. This result can be used as an important part in designing the high speed modem. And, through the computer simulation and the experiment with the proposed architecture, we show that the proposed receiver structure yields fast operation speed and simple overall architecture.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.685-688
• /
• 2003

In this paper, a performance comparison between two blind signal estimation algorithms in a LTI channel is considered. The two algorithms, Iterative Least-Squares with Projection (ILSP) and a modified ILSP, are based on the finite-alphabet property of input symbols. This case typically arises in a multiple access system with a sensor array antenna at the receiving end. We start with the formulation of a maximum-likelihood (ML) estimation problem under an additive white Gaussian noise assumption. A blind ML estimator is derived with its iterative algorithm for calculation. Then we narrow down the consideration of this problem to QPSK case so that a modified algorithm is proposed for $\pi$/4-QPSK case. The modified version is compared with the original ILSP algorithm in terms of the rate of the convergence to global minima. A computer simulation shows that the modified algorithm gives a better performance. This result implies that the performance of the blind separation algorithms may be greatly improved by adopting a smart coding scheme with rich structure.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.907-910
• /
• 2000

QPSK 복조기는 위상 오차에 따른 문제점을 극복하기 위해 수신단에서는 반송파의 주파수와 위상을 tracking 하는 Carrier recovery loop부분이 필요하다〔1〕. Carrier recovery loop는 multiplier, arm filter, matched filter, decimator, loop filter, NCO로 구성이 된다〔2〕.기존 Carrier recovery loop의 NCO는 sine과 cosine의 lookup table을 갖는 구조로 되어있어, 전력소모가 크다는 문제점을 가지고 있다. 따라서 본 논문에서는 lookup table을 사용하지 않는 저 전력 구조의 QPSK복조기의 Carrier recovery loop의 NCO를 설계했다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.582-585
• /
• 2003

본 논문에서는 CDMA/QPSK 시스템을 이용하여 압축된 영상 정보 데이터를 다중 경로 환경에서 전송했을 때 전송 에러가 정보에 미치는 영향을 분석하였다. 무선 채널 환경으로써 ITU-R M.1225에서 제시한 시스템 모델링 파라미터를 이용하여 실내 사무실 환경, 보행자 이동 환경, 차량 이동 환경에 따라 압축된 영상 정보가 전송되었을 때 복원된 영상을 분석하였다.