• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.462-469
• /
• 2007

ATM protocol has the techniques such as cell discarding priority, traffic shaping and traffic policing. ATM based MPLS(Multiprotocol Label Switching) is discussed for its provisioning QoS commitment capabilities, traffic engineering and smooth migration for BcN using conventional ATM infra in Korea. This paper proposes preventive congestion control mechanism for detecting HTR(Hard To Reach) LSP(Label Switched Path) in ATM based MPLS systems. In particular, we decide HTR LSP using real time signaling information(etc., PTI,AIS/RDI) for applying HTR concept in circuit switching to ATM based MPLS systems and use those session gap and percentage based control algorithm that were used in conventional PSTN call controls. We concluded that it maximized the efficiency of network resources by restricting ineffective machine attempts. Proposed control can handle 208% call processing and more than 147% success call, than those without control. It can handle 187% BHCA(Busy Hour Call Attempts) with 100 times less than use of exchange memory.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1433-1442
• /
• 1997

Algorithm design is needed to optimized bandwidth which satisfy quality of service(QoS) requirements of vary traffic classes for Multimedia service in ATM networks. The diverse flow characteristics e.g., burstiness, bit rate and burst length, have to guarantee the different quality of service(QoS) requirements in Asynchronous Transfer Mode(ATM). The QoS parameter may be measured in terms of cell loss probability and maximum cell dely. In this paper, we consider the ATM networks which the virtual path(vip) concept is implemented by applying the Markov Modulated Deterministic Process method. We develop an efficient algorithm to computer the minimum capacity required to satisfy all the QoS requirements when multiple classes of on-off source are multiplexed on single VP. Using above the result, we propose a simple algorithm to determine the VP combination to achieve the near optimum of total capacity required for satisfying the individual QoS requirements. Numerical results are also presented to demonstrate the performance of the algorithm, when compared to the optimal total capacity required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1195-1207
• /
• 1999

Wireless channel has high error rate and limited bandwidth. In order to guarantee the quality of service for multimedia through wireless channel, wireless ATM network requires the cell structure with error control schemes and an efficient medium access control protocol. In this paprt, an efficient medium access control protocol, which is considered of cell structure and the QOS, is proposed for wireless ATM networks. Many kinds of ATM cell structures are analyzed in terms of cell error rate and cell loss rate to choose the proper cell structures for this proposed MAC protocol. And a bandwidth allocation algorithm is also designed to satisfy the priority of services. The performance of proposed MAC protocol are evaluated in terms of channel utilization, call blocking and packet discard probability accotding to different kinds of cell structure through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.777-781
• /
• 2005

It is issued that protecting and managing a copyright are very important to a digitization of multimedia content. All of these techniques are for developing solution about protection and management of the copyright and media service. These have been at the head of the growth of the whole media service, but cause problems such as a illegal copy and distribution. To solve these problems, researchers are performing many projects. We analyze the trend of a multimedia service IPMP(Intellectual Property Management and Protection), DMP(Digital Media Project), ENTHRONE(End-to-end Qos through Integrated Management of Content, Networks and Terminals), and DRM(Digital Rights Management).

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.69-77
• /
• 2008

This article proposes new method for estimating pedestrian quality of service(QOS) that is useful to changing pedestrian environment by examining pedestrian quality of service as well as developing new method that integrate qualitative variables into the estimating indicators for the pedestrian movement right. Based on survey questionnaire addressed to experts group, the obtained data for the indicators were analyzed through Analytic Hierarchy Process(AHP). The results show that pedestrian traffic flow(quantitative figure: 52%), sidewalk geometric(quantitative figure: 16%), sidewalk usage behavior(qualitative figure: 11%) in commercial and business zone pointed out the importance of quantitative indicators such as pedestrian traffic flow, and sidewalk geometric. In addition, the results also show that pedestrian traffic flow(quantitative figure: 30%), sidewalk geometric(quantitative figure : 22%), sidewalk usage behavior(qualitative figure: 20%) indicate the significance of qualitative indicators such as pedestrian's sidewalk usage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.629-642
• /
• 1996

ATM switch handles the traffic for a wide range of appliations with different QOS(Quality-of-Service) requirements. In ATM switch, the priority control mechanism is needed to improve effectively the required QOS requirements. In this paper, we propose a priority control mechanism using the cell transfer ratio type and discard threshold in order to archive the cell loss probability requirement and the delay requirement of each service class. The service classes of our concern are the service class with high time priority(class 1) and the service class with high loss priority control mechanism, cells for two kind of service classes are stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the shole range of the buffer and cells for class 1 are allocated up to discard threshold of the buffer. In case cells in the buffer are transmitted, one cell for class 1 is transmitted whenever the maximum K cells for class 2 are transmitted consecutively. We analyze the time delay and the loss probability for each class of traffic using Markov chain. The results show that the characteristics of the mean cell delay about cells for class 1 becomes better and that of the cell loss probability about cells for class 2 becomes better by selecting properly discard threshold of the buffer and the cell transfer ratio according to the condition of input traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.855-869
• /
• 1997

In this paper, we proposed two kids of dynamic priority control mechanisms controlling the cell service ratio in order to improve the QOS(Quality of Service). We also analyse theoretically the characteristics of cell loss probability and mean cell delay time by applying the proposed priority control mechanisms to ATM switch with output buffer. The proposed priority control mechanisms have the same principles of storing cells into buffer but the different principles of serving cells from buffer. The one is the control mechanism controlling the cell service ratio according to the relative cell occupancy ratio of buffer, the other is the control mechanism controlling the cell service ratio according to both the relative cell occupancy ratio of buffer and the average arrival rate. The two service classes of our concern are the delay sensitive class and the loss sensitive class. The analytical results show that the proposed control mechanisms are able to improve the QOS, the characteristics of cell loss probability and mean cell delay time, by selecting properly the relative cell occupancy ratio of buffer and the average arrival rate. conventional DLB algorithm does not support synchronous cells, but the proposed algorithm gives higher priority to synchronous cells. To reduce synchronous cell loss rate, the synchronous cell detector is used in the proposed algorithm. Synchronous cell detector detects synchronous cells, and passes them cells to the 2nd Leaky-Bucket. So it is similar to give higher priority to synchronous cells. In this paper, the proposed algorithm used audio/video traffic modeled by On/Off and Two-state MMPP, and simulated by SLAM II package. As simulation results, the proposed algorithm gets lower synchronous cell loss rate than the conventional DLB algorithms. The improved DLB algorithm for multimedia synchronization can be extended to any other cells which require higher priority.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.107-110
• /
• 2004

IEEE 802.15.3 is wireless Medium Access Control(MAC) and Physical Layer(PHY) specification for high rate WPAN (Wireless Personal Area Network). IEEE 802.15.3 MAC Layer provides Qos with three kinds of acknowledgements; No acknowledgement, Immediate acknowledgement, and Delayed acknowledgement. This paper presents how to improve QoS with new acknowledgement method called Delayed Negative acknowledgement. This paper describes the method of using Delayed Negative acknowledgement and presents the calculation of QoS improvement by using Delayed Negative acknowledgement.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.241-244
• /
• 1998

ATM 망은 기존 망 서비스를 수용하여야 하며 특히 회선 대행 서비스의 제공은 필수적이다. 회선 대행 서비스는 일정 비트율의 실시간성 서비스이며 손실에 민감한 특성을 갖기 때문에 엄격한 Qos 의 보장을 요구한다. 회선 대행 서비스는 64Kbps 단위의 Time Slot 의 수(N)에 따라 사용 대역폭이 결적되며 ATM 망과 연동을 위해서는 ATM 트래픽 파라메터로 변환되어야 한다. 회선 대행 서비스의 경우 CAS(Channel Associated Signaling)를 사용하는 경우와 Partial Cell Fill을 허용하는 경우에 따라 ATM Cell Rate를 다르게 적용하여야 한다. 이 논문은 ATM 망이 회선 대행 연결을 ATM의 CBR 서비스 카테고리로 Mapping 하기 위한 트래픽 파라메터 산출 방법을 제시한다. 또한 다수의 회선 대행 링크가 하나의 ATM 링크로 다중화되는 경우 ATM 인터페이스의 연결 수락 제어 절차를 제안한다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.237-240
• /
• 1998

BISDN 망 구축을 위한 ATM 교환기는 고속의 스위치 망을 통해 사용자들의 고속 정보를 교환 할 수 있는 경로를 제공하고 있으며, 기존 통신망들과의 연동을 통해 다양한 서비스를 제공하기 위하여 여러 가지 가입자 정합장치의 수용이 요구되고 있다. 현재 국내에서 개발되어 시험중인 HANbit ACE ATM 교환기는 DS-1, DS-1E, DS-3 및 STM-1급의 가입자 정합 장치를 제공하며, 중계선 정합 장치로는 DS-3 및 STM-1 급을 지원한다. 이러한 구조에서 사용자 QOS 를 만족시키며 네트워크 비용을 최소화 시키는데 많은 어려움이 따른다. 즉 다양한 정합장치와 다단 스위치 구조하에서 다양한 트래픽 특성을 갖는 호/연결에 대한 효과적인 호 수락 제어 기능이 필수적으로 요구된다. 본 고에서는 다양한 정합 장치와 3단 스위치 구조를 갖는 HANbit ACE ATM 교환기를 살펴보고, 다양한 트래픽 수용을 위한 트래픽제어 요구사항을 알아보며, 이와 같은 특성을 해결하고자 실현된 호/연결 수락 제어 기능에 대해 고찰한다.