• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.180-191
• /
• 2016

Purpose: The purpose of this study was to develop the accelerated life test method for Constant Electrical Potential Electrolysis gas sensor (CEPE gas sensor). Methods: The parts and modules of CEPE gas sensor were analyzed by using Reliability Block Diagram (RBD). Failure Mode and Effect Analysis (FMEA) and Quality Function Deployment (QFD) methods were performed for each part to determine the most affecting stress factor in its life cycle. The long term testing was conducted at three different dry heat levels and the acceleration factor was developed by using Arrhenius relationship. Conclusion: The acceleration factor for CEPE gas sensor was developed by using FMEA, QFD, and statistical analysis for its failure data. Also qualification tests were designed to meet the target life.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.921-929
• /
• 2005

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot spots in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.421-430
• /
• 2010

This work describes a derivation process of JIC(Joint Integrating Concept) based JFC(Joint Functional Concept) analysis of an Aegis BMD(Ballistic Missile Defense). JIC is developed through JOC(Joint Operating Concept) and JFC based on capstone strategy and concept. Aegis BMD is a sea-based ballistic missile defense to detect ballistic missile threat, increase engagement battlespace and enable multiple engagement based on Aegis ships. Aegis BMD is a good case of JIC due to performing an Joint operations based on System of Systems under highly complicated NCW environment. This work analyses JFC using QFD(Quality Function Deployment) and UJTL(Universal Joint Task List). From this analysis the JIC of Aegis Korean BMD is derived using a CASE tool.

• 한국IT서비스학회:학술대회논문집
• /
• 2010.05a
• /
• pp.59-67
• /
• 2010

U-Services(Ubiquitous Services)는 최근 성공적인 U-City의 구축에 있어서 핵심적인 요소로 주 목 받고 있다. U-City라는 개념은 현재 한 도시의 통신과 인프라의 통합 관리라는 차원에서 주로 접근되고 있는 실정이나, 궁극적으로는 한 도시의 사용자들인 시민들에게 어떠한 가치를 돌려주고, 이를 어떻게 지속 할 수 있을지에 대한 의문이 지속적으로 제기되고 있다. 도시의 사용자인 시민과 입주기관들에게 어떠한 '가치'를 제공할 수 있는지에 대하여 고민하는 과정으로써, 본 연구 에서는 소요 기술, 활용 인터페이스, 구현되는 공간, 그리고 제공하는 컨텐츠에 따라 정의할 수 있는 방법론을 제시한다. 또한, 제조업에서 주로 활용되던 QFD(Quality Function Deployment - 하나의 제품을 개발하는 과정에서 요구되는 기능이나 속성을 규정하기 위한 Analytic Hierarchy Process framework)를 도시 설계로 적용하여 SVD (Service-Value Deployment method)라는 방법론으로 제시하고 있다.

• Journal of Korean Society for Quality Management
• /
• v.36 no.3
• /
• pp.1-12
• /
• 2008

Obtaining the accurate final importance of each customer attribute (CA) is very important in the house of quality(HOQ), because it is deployed to the quality of the final product or service through the quality function deployment(QFD). The final importance is often calculated by the multiplication of the relative importance rate and the competitive priority rate. Traditionally, the sample mean is used for estimating two rates but the dispersion is ignored. This paper proposes a new approach that incorporates statistical significance to consider the dispersion of rates in determining the final importance of CA. The approach is illustrated with a design of car door for each case of crisp and fuzzy numbers.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.51-59
• /
• 2009

These days mobile phone which were used mainly by grown-up persons are now widely used among children as well due to new social demands. Despite this trend, existing mobile phones are still being designed and produced according to the taste of people in their 20s and 30s, even the elderly, not satisfying physical, emotional and cognitive characteristics raised by children. This study aimed to extract the design factors of mobile phones for children by reflecting functional factors requested by children and parents in QFD's customer demands. First, functional and design factors requested in mobile phones for children were extracted from existing products and documentary records and some functional factors were selected through a process of integration and omission. The survey research was conducted on children and parents, based on the selected functional factors. Based on the survey research, functional factors were analyzed using AHP, and key functional factors considered by children and parents in mobile phones for children were investigated. Finally, in order to reflect the results in QFD, the correlation between functional factors and design factors was constructed as HOQ through experts' evaluation. The results showed that both children and parents recognized the basic functions such as telephoning, text messaging and phone directory as high priority functional factors, even though the relative importance was different between children and parents. Therefore, it is likely to satisfy the desires of both children and parents by designing mobile phones for children in consideration of design factors such as menu depth, button independence and button arrangement. It is expected that this study will promote experiments on design factors and propose basic data for and guidelines to mobile phone design for children.

• IE interfaces
• /
• v.15 no.2
• /
• pp.114-125
• /
• 2002

The objective of this paper is to describe a systematic accident scenario analysis method(SASA) adept at creating accident scenarios for the design of safer products. This approach was inspired by the Quality Function Deployment(QFD) method, which is conventionally used in quality management. In this study, the QFD provides a formal and systematic scheme to devise accident scenarios while maintaining objectivity. SASA consists of three key stages to be broken down into a series of consecutive steps:(1) developing an accident analysis tableau,(2) devising the accident scenarios using the accident analysis tableau,(3) performing a feasibility test, a clustering process and a patterning process, and finally(4) performing quantitative evaluation of each accident scenario. The SASA was applied to a case study of child safety seats. The accident analysis tableau devised 2828(maximum) accident scenarios from all possible relationships between the hazard factors and situation characteristics. Among them, 270 scenarios were devised through the feasibility test and the clustering process. The patterning process reduced them to 29 patterns representative of all accident scenarios. Based on an intensive analysis of the accident patterns, design guidelines for a safer child safety seat were recommended. The implications of the study on the child safety seat case were then discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.38-60
• /
• 1999

The main objective of this study is systemization of the technique of ROC quantification and optimization of baseline design by applying CE principle to the acquisition process of a weapon system. QFD and TOA techniques can be employed to a good working example of the conceptual design of a future main battle tank. In this paper, Product Planning Phase, the first phase of four QFD phases, is deployed in terms of eight steps including customer requirements and final product control characteristics. TOA is carried out considering only combat weight. In order to perform combat weight analysis and performance TOA, Preliminary Configuration Synthesis Methodology is used. Preliminary Configuration Synthesis Methodology employs the method of least squares and described linear equations of weight interrelation equation for each component of tank. As a result of QFD based upon the ROC, it was cleared that armor piercing power, main armament, type of ammunition, cruising range, combat weight, armor protection, power loading, threat detection and cost are primary factors influencing design and that combat weight is the most dominant one. The results of TOA based on the combat weight constraint show that 5100 lb reduction was required to satisfy the ROC. The baseline design of a future main battle tank is illustrated with assumption that all phases of QFD are employed to development and production process of subsystems, components, and parts of main battle tank. TOA is applied in iterative process between initial baseline design and ROC. The detailed design of each component is illustrated for a future main battle tank.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.6
• /
• pp.1-12
• /
• 2017

This paper is brought to asses the training effect of KS-QFD boot camp for the companies in the early growth stage. In particular, the focus of research falls on measuring transfer intension of the participants from the early stage companies older than three years old, motivating effect of applying knowledges acquired from KS-QFD training camp into their real business case. KS-QFD program is presented to help company in the early stage companies over three years old of boosting up their sales volume more than 5 times than now for the next 18 months by this training. The training program of KS-QFD is ultimately to design more practical and helpful program to real business and spread out. The research establish model by setting the learner readiness and perceived content validity by doing training design as independent variables, self-efficacy of learner as mediating variable, and transfer intension as dependant variable. Research results shows the following outcomes. First, learner readiness does not have directly effect on transfer intension under keeping statistical significance. But as the parameter of self-efficacy, it has perfect mediating effect. Second, research proves that perceived content validity have directly impact on learning transfer intension of mediating by self-efficacy partially. This research contributes on proving that learning by doing KS-QFD boot camp enable the participants to build up their self-efficacy and lead to enhance transfer intension. In more steps, the research validates that KS-QFD training camp have delivered very practical and helpful on-site knowledge to the participants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1596-1604
• /
• 2004

Quality Function Deployment(QFD) is a product development tool which ensures that the voice of the customer needs is heard and translated into products. To develop a sensible brassiere for middle-aged women QFD was adopted. In this study the applicability and usefulness of QFD was examined through the engineering design process for a sensible brassiere for middle-aged women. The customer needs for the wear comfort of brassiere was made by one-on-one survey of 100 women who aged 30-40. The customer competitive assessment was generated by wearing tests of 10 commercial brassieres. The subjective assessment was conducted in the enviornmental chamber that was controlled at $28{\pm}1^{\circ}C,\;65{\pm}3\%RH.$ As a results, we developed twenty-one customer needs and corresponding HOWs for the wear comfort of brassiere. The Customer Competitive Assessment was generated by wearing tests of commercial brassiere. The subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap. Engineering design process, QFD was applicable to the development of technical and aesthetic brassieres.