• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.465-476
• /
• 2021

Scale and rust generation in water pipes is a common phenomenon when cast iron water pipes have been used for a long time. A physical water treatment device is known among various means for suppressing rust in a water pipe, and a zinc ionization device for putting zinc metal into a pipe and emitting the zinc cation into water is one of such devices. This research measured the amount of zinc ion generated, which is known to exhibit an effect of inhibiting rust and scale generation in a pipe, and examined the scale and rust inhibition effect of the ionization device installed for ground or building water supply. In the case of distilled water, the concentration of zinc ion increased by circulating water in the ionization device several times, and it was verified to be hundreds of ㎍/L, and in the case of discharging ground or tap water, it was verified to be tens of ㎍/L. In addition, a verification pipe was installed to confirm the change inside the pipe before and after installation of the zinc ionization device, and the internal condition of the pipe was observed 3 months to several years after installation. It was confirmed that the corrosion area of the surface of the pipe was no longer increased by installing a corrosion inhibitor, and if the pipe was already filled with corrosion products, the amount of corrosion products gradually decreased every year after installation. The phenomenon of fewer corrosion products could be interpreted as expanding the space in the pipe due to the corrosion product as Fe₂O₃ adhered to the inner surface of the pipe and turned into a smaller black Fe₃O₄. In addition, we found that scale such as CaCO₃ together in the corrosion by-products gradually decreased with the attachment of the ionization device.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.203-214
• /
• 2022

As the global demand for small satellites weighing less than 500 kg increases, the development and operation of dedicated small launch vehicles increase significantly. The responsiveness of a launch vehicle that puts a small satellite into a target orbit at the desired time is attracting attention. As a result, interest in the air launch is increasing in the rapid establishment of a constellation. As the demand for small satellites in south Korea increases, this study performed analyses on the applicability of an air launch vehicle using a large civil aircraft considering the geographical environment. In terms of responsiveness, mission response times were compared and analyzed for air launch vehicles and ground small and large vehicles. In addition, an air vehicle and a small ground vehicle were quantitatively compared and analyzed for the orbital insertion performance. As a result of the analysis, the air launch vehicle has limited responsiveness in Korea regarding rapid satellite constellation establishment. However, it can be an effective alternative for low inclination angle orbit insertion with the benefit of a fast turnaround time. Furthermore, the performance of the orbital injection is close to that of the ground small launch vehicle, and the high efficiency in terms of the required propellant mass is possible, so air launch can be an effective launch means for putting small satellites into orbit in Korea.

• Korean Journal of Culture and Social Issue
• /
• v.27 no.2
• /
• pp.167-189
• /
• 2021

The purpose of this study was to classify different profiles of grit (effort vs. interest) and passion mindset (fixed vs. growth) in university students and to understand whether there are differences in psychological characteristics (ie. depression, anxiety and happiness) and career adaptability between the profiles. To this end, we recruited 359 students aged 18 and 25 and applied a Latent Profile Analysis(LPA). The results revealed 4 distinct profiles : Profile1-a burgeoning type, Profile2-an ordinary type, Profile3-a fixed/limited type, Profile4-sprouting/drifting type. The profile1(LP1, 22.2%) had high levels of grit and passion growth mindset. The profile2(LP2, 63.8%) showed average levels in both grit and passion mindset. The profile3(LP3, 8.8%) had a low level of grit and a high level of passion fixed mindset. The profile4(LP4, 5.1%) showed a low level of grit and a high level of passion growth mindset. The four profiles were distinct in psychological characteristics and career adaptability. The burgeoning type(profile1) was most adaptive in comparison to the fixed/limited type(profile 3). These results suggest that grit has more powerful effects on psychological characteristics while passion growth mindset exerts stronger influencers in career adaptability. Putting the results together, our findings imply that both passion growth mindset and grit need to be considered together to enhance the individuals' comprehensive well-being and to increase the level of adaptation for career preparation.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.175-183
• /
• 2022

With the expansion of the automobile market, the demand for Nd as an essential rare earth material for automobile motors is rapidly increasing. Research on the calcio-thermic reduction process between Nd₂O₃ and calcium-based alloys has been extensively studied in order to manufacture Nd. In this study, Ca-Cu, as a reducing for Nd₂O₃, was prepared by electrolysis in CaCl₂ molten salt. Cu wire and graphite were employed as a working electrode and a counter electrode for electrolysis reaction, respectively. The reference electrode was manufactured by putting Ag wire in a mixture of AgCl and CaCl₂ at a ratio of 1:99 mol%. The cyclic voltammetry results showed that the deposition of Ca²⁺ on the surface of working electrode was observed from a potential of -1.8 V, and the reduction potential of Ca²⁺ decreased as the reaction temperature increased. The diffusion coefficient of Ca²⁺ calculated by the chronoamperometry experiment was found to be 5.4(±6.8)×10^-6 cm²/s. In addition, Ca-Cu liquid alloy was prepared by applying a constant potential to Cu electrodes. The element ratio of Ca-Cu alloy formed by applying a potential of -2.0 V was found to Ca:Cu=1:4.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_4
• /
• pp.1889-1900
• /
• 2022

Roads are an essential factor in the physical functioning of modern society. The spatial information of the road has much longer update cycle than the traffic situation information, and it is necessary to generate the information faster and more accurately than now. In this study, as a way to achieve that goal, the Pan-sharpening technique was applied to satellite images of Kompsat 3 and 3A to improve spatial resolution. Then, the data were used for road extraction using the semantic segmentation technique, which has been actively researched recently. The acquired Kompsat 3/3A pan-sharpened images were trained by putting it into a U-Net based segmentation model along with Massachusetts road data, and the applicability of the images were evaluated. As a result of training and verification, it was found that the model prediction performance was maintained as long as certain conditions were maintained for the input image. Therefore, it is expected that the possibility of utilizing satellite images such as Kompsat satellite will be even higher if rich training data are constructed by applying a method that minimizes the impact of surrounding environmental conditions affecting models such as shadows and surface conditions.

• Trans-
• /
• v.12
• /
• pp.81-106
• /
• 2022

The possibility of metaverse system to be a catalyst for hyper-connected society will be dependent on the speed of connected technological development and its social utilization in the same manner as AI technology. Putting these technical realization processes in brackets, this paper focus on some philosophical-political issues in connection with cognitive-ecological changes in the future cinema which will be influenced by the complexive techno-socio couples of accelerated development of metaverse system. Generally speaking, essence of metaverse system seems to be the degree of immersion by technical accuracy, but is not true. In perspective of cognitive-ecology, flow degree of a picture or photograph is relied not on 'accuracy of representation' but on its message's contextual link-up. In this aspect, real potentiality of metaverse system shall be understood in the context of cognitive-ecological changes of human brain's multi-intelligence networking abilities(intersection of augmentation-simulation and outside-inside) which will be activated in the new structure of natural-social-technological coupling of metaverse system. These cognitive-ecological potentialities have been partially actualized in the cinematic process of tripod mimesis for the longest time, [real contradiction/conflicts (Mimesis-1) -->fictional solutions of cinema (Mimesis-2) --> selective interpretation of spectator's wish fulfillment (Mimesis-3) --> real change (Mimesis-1')]. Therefore metaverse's real potentiality must be considered to be dependent on the possibility of deepening and extending of cinematic circulation between real seperation/problems and ideal connection/solutions. In this context, advanced metaverse system can be compared as a modern technical version of ideal circulation of physics and metaphysics

• Industry Promotion Research
• /
• v.6 no.2
• /
• pp.55-62
• /
• 2021

The number of single-parent families in South Korea increased since 2000, related to a sharp rise in the divorce rate of 50s and an increase in male mortality rates among those aged 40s-50s. Middle-aged single mothers experience a critical period realizing self-actualization needs, while being in the middle adulthood from the lifespan developmental perspective. In this respect, it is significant to study self-actualization of middle-aged single mothers through guided imagery and music (GIM) in order to provide them with psychological support. This study was conducted from September 2018 to June 2020, and the GIM sessions were conducted at least 10 times. Four participants were selected among the middle-aged single mothers. The imagery experiences of participants in the GIM sessions were classified into four sub-elements: physicalness, emotion, memory, and sense. Within those sub-elements, eight semantic units were categorized into 46 elements. Finally, 152 semantic units were derived. Moreover, the self-actualization which participants experienced through GIM presented three archetypal images: shadow, persona, and the self. In the GIM sessions, experiences of putting their negative emotions associated with family into words and changing passive self-imagery into active one enabled participants to bring the shadow into their consciousness, there by recognizing their positive and bright internal self. Furthermore, participants could map that their current status as people marginalized by siblings and parents, enraged and holding double standards for others, was suppressed by their 'good daughter' and 'religious' personas. This realization lead them to realize and restore their persona. The use of GIM in the study allowed participants to elicit re-experiences of the negative events, while experiencing various imagery and music. This process helped participants achieve self-actualization.

• The Journal of Korean Society for School & Community Health Education
• /
• v.23 no.4
• /
• pp.17-28
• /
• 2022

Objectives: This study aimed to provide the measures for improving the self-directed learning ability and the reference data for substantializing the educational programs by verifying the main factors affecting the self-directed learning ability of dental hygiene students in reality when the learners' autonomy is emphasized than ever. Methods: From June 20 to July 4, 2022, an online survey was conducted targeting total 218 dental hygiene students. The collected data was analyzed by using the SPSS Program Version 22.0. Results: First, in the results of analyzing differences in detailed items of self-directed learning ability according to the general characteristics, the 'students who entered the department of dental hygiene by considering their aptitude and interest' showed higher results than the 'students who entered the department by considering their high school record'. Second, when the academic efficacy, study immersion, and problem-solving ability of dental hygiene students were higher, their self-directed learning ability was also high. Third, the factor that had the greatest effect on self-directed learning ability of dental hygiene students was problem-solving ability, which was followed by academic efficacy and study immersion. Conclusion: Putting together the results above, in order to cultivate the problem-solving ability of dental hygiene students, it would be necessary to operate the problem-solving-centered simulation course that could foster critical thinking, interactions with others, and creative approach and solution to problems in dental medical site. It would be also possible to improve their academic efficacy by applying the learning mentoring & one-to-one learning counseling program, and also strengthening proper feedbacks for learners. Moreover, the study immersion could be strengthened by developing and operating the emotion-based learning motivation program & learning coaching program through the process of verifying the potential and growth needs of learners, exploring one's own resources through learning diagnosis/introspection, and exploring the career-related vision for strengthening the learning motivation, which could have positive effects on the improvement of self-directed learning ability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.3
• /
• pp.63-82
• /
• 2022

The purpose of this study is to compare growth condition of landscape woody plants growing on the different ground structures in apartment complex. I chose Manseok Beach Town Complex 2, in Manseok-dong, Seo-gu, Incheon which has both natural and artificial ground as a subject site. Analysis of three phases of soil showed that artificial ground had average liquid phase of 30.89%, artificial ground mounding 33.88% and natural ground 24.40%. It means that artificial ground has higher water content than natural ground despite having same earthiness. It is believed that artificial ground is not as well drained as natural ground even though it is connected to the natural ground and has a deep soil depth because of mounding. Comparative study between woody plants on natural ground and those on artificial ground demonstrated that trees on natural ground grew 40.4% compared to those on artificial ground(0.875mm more) in terms of diameter growth. Average diameter growth of trees on natural ground was 3.040mm against 2.165mm for those on artificial ground. All 19 tree species which were measured for root diameter growth showed similar or higher growth on natural ground than on artificial ground. When it comes to growth of height, arborvitae showed highest growth on natural ground, followed by Thuja occidentalis, Pinus strobus, Magnolia denudata, Diospyros kaki and Aesculus turbinata. I measured branch growth and rate of leaf adherence of Pinus strobus. Average annual rate of branch growth of woody plants on natural ground was twice as high as those on artificial ground. I could conclude that ground structure influences branch growth of Pinus strobus. Statistics analysis of tree damage demonstrated significant result, meaning that there is a difference in the average damage rate depending on structure of ground. In order to validate growth difference by planting ground, I conducted T-Test of growth of diameter, root diameter, branch and height on woody plants growing on natural and artificial ground. As a result, it is believed that there is a difference in the growth of trees depending on the ground structure. Putting all these results together demonstrates that woody plants on natural ground generally grow better than those on artificial ground, which means ground structure does have an influence on the environment of growth of trees.

• The Korean Journal of Franchise Management
• /
• v.13 no.2
• /
• pp.53-66
• /
• 2022

Purpose: How to build the attitude on brand is very important, because it affects the positive word of mouth and revisit intention. Brand attachment, brand name, and image congruence play important role on consumer behavior in terms of reinforcing consumers' perception of food service companies and differentiating them from competing brands. Following the planned behavior theory, this paper examines the effect of linking brand attitude to word-of-mouth and revisit intentions in the restaurant sector. Research design, data, and methodology: This paper examines the structural relationship among brand attachment, brand name, image congruence, brand attitude, WOM, and revisit intention. In order to test the purposes of this study, research model and hypotheses were developed. The questionnaire items were modified and used according to the content of this study based on previous studies. All constructs were measured by multiple items tested and developed in the previous research. The study is based on the quantitative method and considered 519 questionnaires fulfilled by customers of restaurants. The data were explored employing the partial least square-structural equation modelling (PLS-SEM). Frequency analysis was conducted to identify the general characteristics of the survey subjects. To measure the reliability and validity of the measurement tools, confirmatory factor analysis was conducted. Structural model analysis was conducted to verify the research model. Result: The findings demonstrate that brand attachment and brand name had positive effects on attitude while image congruence did not have. Also, attitude had positive effect on WOM and revisit intention. Conclusions: This study expands the literature about WOM and revisit intentions. This study expands prior research in a similar field to which the theory of planned behavior (TPB) is applied, and reveals that brand attachment, brand name, and brand image congruence play an important role in developing brand attitude that affect revisit intention and WOM. And provide guidelines on how to enhance competitiveness in the restaurant sector based on understanding of linking brand attitude to customer loyalty and repeat business. By putting into practice these suggestions in the restaurant industry, brands can easily build up their attitude and boost a positive WOM and the intention to revisit.