• 제목/요약/키워드: Pushbroom Imagery

검색결과 11건 처리시간 0.026초

선형 Pushbroom 영상의 에피폴라 기하모델 수립을 위한 간소화된 방법론 (A Simplified Strategy for the Epipolar Geometry of Linear Pushbroom Imagery)

  • 이해연;박원규
    • 대한원격탐사학회지
    • /
    • 제18권2호
    • /
    • pp.97-105
    • /
    • 2002
  • In this paper, we proposed a simplified strategy for the epipolarity of linear pushbroom imagery. The proposed strategy is verified on "Gupta and Hartly" sensor model and "Orun and Natarajan" sensor model. It is also compared with the precise epipolarity model of each sensor model on SPOT and KOMPSAT imagery. For the quantitative analysis, 20 ground control points are used as independent checking points. Based on the results, the accuracy of the proposed strategy is not different from that of the precise epipolarity model of each sensor model (below 0.1 pixels). Under the worst circumstance, the proposed strategy is robust. We can assure that the proposed strategy will show high accuracy on most of sensor models based on the co-linearity equations.

구름을 포함한 푸쉬브룸 스캐너 영상의 밴드간 상호등록 (Image Registration of Cloudy Pushbroom Scanner Images)

  • 이원희;유수홍;허준
    • 대한원격탐사학회지
    • /
    • 제27권1호
    • /
    • pp.9-15
    • /
    • 2011
  • 푸쉬브룸 스캐너 PAN영상과 MS영상 사이에는 오프셋이 존재하며 서로 다른 시간과 각도로 촬영하고 있다. 이로 인하여 구름과 같이 빠르게 움직이는 물체는 오정합 점들을 생성하며 이는 PAN영상과 MS영상간의 상호영상등록의 오차를 발생시킨다. 특히 구름(안개 및 스모그 포함)이 있는 기상조건 하에서 얻어진 위성영상은 구름에 의해 가려진 지형정보를 추출하는 데 있어 많은 문제를 야기하기 때문에 정확한 영상등록을 위해서는 효과적인 구름 탐지 및 제거 알고리즘이 필요하다. 구름 제거를 위한 관련 연구들은 크게 다음과 같은 세 가지로 나누어지는데 (1) 구름 검출 알고리즘을 통해 구름으로 여겨지는 영역을 분리하여 구름영역을 제거하는 방법 (2) 다중분광영상의 밴드정보를 이용하는 방법 (3) 다시기 영상정보를 이용하는 방법들로 나눌 수 있다. 본 연구에서는 구름 지역을 제거하는 방법과 다시기영상을 이용하는 방법을 사용하여 구름이 포함된 푸쉬브룸 스캐너 밴드간 영상등록의 정확도를 비교, 분석하였다.

SATELLITE ORBIT AND ATTITUDE MODELING FOR GEOMETRIC CORRECTION OF LINEAR PUSHBROOM IMAGES

  • Park, Myung-Jin;Kim, Tae-Jung
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.543-547
    • /
    • 2002
  • In this paper, we introduce a more improved camera modeling method for linear pushbroom images than the method proposed by Orun and Natarajan(ON). ON model shows an accuracy of within 1 pixel if more than 10 ground control points(GCPs) are provided. In general, there is high correlation between platform position and attitude parameters but ON model ignores attitude variation in order to overcome such correlation. We propose a new method that obtains an optimal solution set of parameters without ignoring the attitude variation. We first assume that attitude parameters are constant and estimate platform position's. Then we estimate platform attitude parameters using the values of estimated position parameters. As a result, we can set up an accurate camera model for a linear pushbroom satellite scene. In particular, we can apply the camera model to its surrounding scenes because our model provide sufficient information on satellite's position and attitude not only for a single scene but also for a whole imaging segment. We tested on two images: one with a pixel size 6.6m$\times$6.6m acquired from EOC(Electro Optical Camera), and the other with a pixel size 10m$\times$l0m acquired from SPOT. Our camera model procedures were applied to the images and gave satisfying results. We had obtained the root mean square errors of 0.5 pixel and 0.3 pixel with 25 GCPs and 23 GCPs, respectively.

  • PDF

DIRECT EPIPOLAR IMAGE GENERATION FROM IKONOS STEREO IMAGERY BASED ON RPC AND PARALLEL PROJECTION MODEL

  • Oh, Jae-Hong;Kim, Kyung-Ok
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.860-863
    • /
    • 2006
  • Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (2D Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

  • PDF

Direct Epipolar Image Generation From IKONOS Stereo Imagery Based On RPC and Parallel Projection Model

  • Oh, Jae-Hong;Shin, Sung-Woong;Kim, Kyung-Ok
    • 대한원격탐사학회지
    • /
    • 제22권5호
    • /
    • pp.451-456
    • /
    • 2006
  • Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (20 Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

위성 궤도 정보를 사용하지 않는 Gupta와 Hartley 센서모델의 에피폴라 기하모델 (Epipolar Geometry for Gupta and Hartley Sensor Model without the Ephemeris Data)

  • 이해연;박원규
    • 대한원격탐사학회지
    • /
    • 제18권4호
    • /
    • pp.233-242
    • /
    • 2002
  • 본 논문에서는 위성 궤도 정보를 사용하지 않는 새로운 에피폴라 기하모델을 제안하고, 선형 Pushbroom 영상의 에피폴라 기하모델을 위한 방법들과 정량적으로 비교 분석을 한다. 정량적 분석에 사용된 에피폴라 기하모델은 항공영상에 적용되는 중심투영(Perspective) 센서의 에피폴라 기하모델, Gupta와 Hartley의 에피폴라 기하모델, 궤도정보를 사용하는 Orun과 Natarajan 센서모델의 에피폴라 기하모델이다. 대전과 보령의 SPOT 영상과 대전과 논산의 KOMPSAT 영상에 대해 지상기준점, 지상기준점에서 생성한 모델링데이터, 위성 궤도정보 및 숙련된 운영자가 추출한 독립검사점을 사용하여 실험을 수행하였다. 실험 결과에 따르면 중심투영 센서의 에피폴라 기하모델과 Gupta와 Hartley의 에피폴라 기하모델은 평균적으로 1픽셀 이내의 정확도를 보였으나 일부 검사점에서 높은 오차를 보였다. 제안한 에피폴라 기하모델은 중심투영 센서나 Gupta와 Hartley의 에피폴라 기하모델보다 정확도가 높고, 궤도 정보를 사용하는 Orun과 Natarajan 센서 모델의 에피폴라 기하모델과 유사한 정확도를 보였다.

A Study on the RPC Model Generation from the Physical Sensor Model

  • Kim, Hye-Jin;Kim, Dae-Sung;Lee, Jae-Bin;Kim, Yong-Il
    • Korean Journal of Geomatics
    • /
    • 제2권2호
    • /
    • pp.139-143
    • /
    • 2002
  • The rational polynomial coefficients (RPC) model is a generalized sensor model that is used as an alternative solution for the physical sensor model for IKONOS of the Space Imaging. As the number of sensors increases along with greater complexity, and the standard sensor model is needed, the applicability of the RPC model is increasing. The RPC model has the advantages in being able to substitute for all sensor models, such as the projective, the linear pushbroom and the SAR. This report aimed to generate a RPC model from the physical sensor model of the KOMPSAT-1(Korean Multi-Purpose Satellite) and aerial photography. The KOMPSAT-1 collects 510~730 nm panchromatic imagery with a ground sample distance (GSD) of 6.6 m and a swath width of 17 km by pushbroom scanning. The least square solution was used to estimate the RPC. In addition, data normalization and regularization were applied to improve the accuracy and minimize noise. This study found that the RPC model is suitable for both KOMPSAT-1 and aerial photography.

  • PDF

지상기준점 추가에 의한 IKONOS RPC 갱신 (Modification of IKONOS RPC Using Additional GCP)

  • 방기인;정수;김경옥;조우석
    • 대한공간정보학회지
    • /
    • 제10권4호
    • /
    • pp.41-50
    • /
    • 2002
  • RFM은 OGC (Open GIS Consortium)에서 권고하는 지구관측영상에 대한 표준기하모델 중 하나이다. 또한 RFM은 1m의 공간해상도를 제공하는 상업목적의 위성 IKONOS의 최종 사용자를 위한 센서 모델로서 RPC를 RFM을 위한 매개변수로서 영상과 함께 제공하고 있다. 그러나 영상의 최종사용자가 더욱 정확한 공간정보의 획득을 위해 추가적인 노력을 시도하는 경우, IKONOS는 물리적 센서모델을 위한 보조적인 정보의 제공이 미흡하기 때문에 추상적인 센서모델이나 수학적인 센서모델을 도입하게 된다. Pushbroom DLT와 같은 추상적인 센서모델을 적용하기 위해서는 영상 전체에 고르게 분포하는 다수의 GCP를 관측해야 하며, RFM과 같은 수학적인 센서모델을 적용하기 위해서도 더욱 많은 수의 GCP가 필요하게 된다. 따라서 가장 효율적인 방법은 가장 적은 수의 기준점을 이용하여 영상과 함께 제공되는 RPC를 개선하는 방법이다. 본 논문에서는 소수의 추가적인 UP를 이용하여 IKONOS의 RPC를 개량하는 2가지 방법을 제안한다. 첫 번째는 소수의 지상기준점과 normalized cubic 내에 설치된 가상의 기준점을 이용하여 RPC를 갱신하는 방법이고, 두 번째는 매개변수에 대한 관측을 도입하여 $1^{\sim}5$개의 소수 지상기준점 만으로 RPC를 갱신하는 방법이다. 본 연구에서 갱신된 RPC는 검사점을 통해 검증한 결과 갱신 전보다 RMSE가 50% 정도 개선된 것을 확인할 수 있었다.

  • PDF

KOMPSAT-2 MSC 전처리시스템을 위한 RPC(Rational Polynomial Coefficient)생성 기법에 관한 연구 (A Study on the Method of Generating RPC for KOMPSAT-2 MSC Pre-Processing System)

  • 서두천;임효숙
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2003년도 추계학술발표회 논문집
    • /
    • pp.417-422
    • /
    • 2003
  • The KOMPSAT-2 MSC(Multi-Spectral Camera), with high spatial resolution, is currently under development and will be launched in the end of 2004. A sensor model relates a 3-D ground position to the corresponding 2-D image position and describes the imaging geometry that is necessary to reconstruct the physical imaging process. The Rational Function Model (RFM) has been considered as a generic sensor model. form. The RFM is technically applicable to all types of sensors such as frame, pushbroom, whiskbroom and SAR etc. With the increasing availability of the new generation imaging sensors, accurate and fast rectification of digital imagery using a generic sensor model becomes of great interest to the user community. This paper describes the procedure to generation of the RPC (Rational Polynomial Coefficients) for KOMPSAT-2 MSC.

  • PDF

비접근 지역에 대한 SPOT 위성영상의 Pseudo영상 구성 및 센서모델 분석 (Pseudo Image Composition and Sensor Models Analysis of SPOT Satellite Imagery of Non-Accessible Area)

  • 방기인;조우석
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2001년도 춘계 학술대회 논문집 통권 4호 Proceedings of the 2001 KSRS Spring Meeting
    • /
    • pp.140-148
    • /
    • 2001
  • 일반적으로 위성영상의 센서에 대한 모델은 촬영대상지역의 지상기준점을 이용하여 결정하며, 이와 같은 지상기준점은 기존 지형도를 이용하거나 또는 지상측량에 의하여 획득한다. 그러나 지구관측위성에서 얻어진 영상의 촬영지역이 비접근 지역인 경우에는 지상측량에 의하여 지상기준점을 획득하기 어려우며, 또한 대상지역의 지형도가 제작되어 있지 않은 경우에는 실질적으로 위성영상을 이용하여 지형정보를 추출하기 어려운 실정이다. 본 논문은 지상기준점의 취득이 어려운 비접근 지역에 대한 위성영상에서 지형정보를 획득하기 위한 방법을 제시하였다. 먼저, 공선조건식을 기반으로 10개의 위성센서모델을 개발하고, 개발된센서모델의 거동을 분석하기 위하여 Space Resection 및 Space Inetersection을 통해 각각의 센서모델에 대한 적합성을 실험하였다. 이를 바탕으로 비접근 지역에 대한 지형정보를 취득하기 위하여 영상을 재구성하거나 Pseudo 영상을 제작하고, 이에 대한 센서모델의 거동 및 정확도를 분석.제시하였다. 공선조건식을 이용한 Pushbroom 위성영상의 센서모델은 투영 중심의 위치와 회전요소에 대한 6개의 외부표정요소와 상관도가 높은 회전요소($\omega$, $\phi$)를 고정된 값으로 사용하는 센서모델을 개발하였다. 비접근 지역의 영상으로부터 Pseudo 영상을 임의로 제작하여 패스내에서 중복영역을 갖도록 구성하였다. 본 연구에서 이용한 인공위성 데이터는 서로 다른 패스에서 동일한 지역을 촬영한 SPOT 영상이며, 각각의 패스에서 두 장의 연속된 영상을 이용하였다. 개발된 10개의 센서모델과 5가지의 영상 재구성 방법에 따라 비접근 지역에서의 정확도는 다르게 나타났으며, 그 중 투영중심의 위치 및 회전요소 k를 1차 함수로 표현하고 회전요소 $\omega$, $\phi$를 고정시킨 센서모델과 Pseudo 영상을 이용한 방법이 비접근 지역 60km 지점의 검사점에서 최대오차 60m의 결과를 보였다.

  • PDF