• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.599-605
• /
• 2016

Serratia marcescens, a Gram-negative bacterium characterized by production of a nondiffusible red pigment. Serratia marcescens 2354 (ATCC 25419) was production and purification a high concentration of red pigments when growing on Cang's soytone (CS) culture broth with soytone and ethanol. The optimal temperature and intial pH range for the production of the red pigments were $28^{\circ}C$ and pH 7.5, respectively. The red pigments was separated and purified through organic solvents extraction. Characterization of the red pigments is studied by UV-spectrophotometer at ${\lambda}_{max}$ 537 nm. The HPLC-Mass analysis of the partially purified compounds showed two major peaks with the molecular masses of 537 and 565 g. The red pigments were stable at room temperature under the acidic pH (up to pH 6) but were unstable at the strong alkaline condition. And red pigments were stable at sun light.

• ALGAE
• /
• v.22 no.2
• /
• pp.125-129
• /
• 2007

Conventional methods for the isolation and purification of mRNA from Zygnema were unsuccessful because of its high amount of pigments and RNA interactive molecules. In particular, pigments were difficult to remove using conventional protocols because they interacted with RNA during pulverization of the materials. This resulted in total degeneration of RNA in two to three hours. To alleviate this problem, we developed an isolation method that utilized DEAE-cellulose resin. The pigments bound to DEAE anion exchange resin and separated from the RNA. Purified total RNA showed an yield of 50 μg per 100 mg of tissue with this method. The amplified 2nd strand cDNA was distributed 300 bp and over.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.212-218
• /
• 2008

Inorganic ion exchange compounds (IECs) including hydrotalcites and bentonite clays are a well known classes of layered mixed metal hydroxides or silicates that demonstrate ion exchange properties. These compounds have a range of applications from water purification to catalyst supports. The use of synthetic versions of these compounds as environmentally friendly additives to paints for storage and release of inhibitors is a new and emerging application. In this paper, the general concept of storage and release of inhibiting ions from IEC-based particulate pigments added to organic coatings is presented. The unique aspects of the IEC structure and the ion exchange phenomenon that form the basis of the storage and release characteristic are illustrated in two examples comprising an anion exchanging hydrotalcite compound and a cation exchanging bentonite compound. Examples of the levels of corrosion protection imparted by use of these types of pigments in organic coatings applied to aluminum alloy substrates is shown. How corrosion inhibition translates to corrosion protection during accelerated exposure testing by organic coatings containing these compounds is also presented.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.148-169
• /
• 2023

Hayeob pigment is known as one of the traditional dark green pigments, but the color, raw material, and manufacturing method have not been clearly identified. However, comparing the analysis results of the particle shape and constituent minerals of Hayeob pigments revealed through pigment analysis studies of colored cultural properties such as Dancheong, Gwaebul, and paintings, Hayeob pigments appear to be the same as Dongrok pigments produced by salt corrosion. Therefore, in order to restore Hayeob pigment, the manufacturing method of Dongrok pigment was studied based on the records of old literature. The Dongrok pigment manufacturing method confirmed in the old literature records is a natural corrosion method in which copper powder and a caustic are mixed and then left in a humid condition to corrode. Based on this, artificial corrosion using a corrosion tester was adopted to corrode the copper powder more efficiently, and an appropriate mixing ratio was selected by analyzing the state of corrosion products according to the mixing ratio of the caustic agent. In addition, the manufacturing method of Dongrok pigment was established by adding a salt removal process to remove residual caustic agents and a purification process to increase chroma during pigment coloring. The prepared Dongrok pigments have a bluish green or green color, show an elliptical particle shape and a form in which small particles are aggregated, and a porous surface is observed. The main constituent elements are copper(Cu) and chlorine(Cl), and the main constituent mineral is identified as atacamite [Cu₂Cl(OH)₃]. As a result of an accelerated weathering test to evaluate the stability of the prepared Dongrok pigments, it was found that the greenness partially decreased and the yellowness significantly increased as deterioration progressed. Before deterioration, the Dongrok pigments had lower yellowness compared to the Hayeob pigments of the old Dancheong, but after deterioration, yellowness increased significantly, and it was found to have a similar chromaticity range as Dancheong's Hayeob pigments. As a result, the prepared Dongrok pigments were confirmed to be similar to Dancheong's Hayeob pigments in terms of color as well as particle shape and constituent minerals.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.282-288
• /
• 2009

A dark brownish pigment from fruit body of Auricularia auricula was isolated and characterized in this report. The pigment was obtained with a yield of 0.61%(w/w) by alkaline extraction and subsequent purification steps. It showed the positive $FeCl_3$ test which was the indication of phenolic compounds. A synthetic melanin showed a similar spectrometric characteristics to the pigment extract regarding a characteristic UV absorption between 200-250 nm and infrared absorptions profiles in the finger print region including absorption peaks at 1701 and 1624 $cm^{-1}$. Its element analysis indicated that its atomic copmposition is close to that of DOPA melanin (eumelanin). With the result of its antioxidant activity in the TNBT (5-thio-2-nitrobenzoic acid) assay, we concluded that the dark brownish pigment from A. auricula is a melanin-like compound having a powerful antioxidative activity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.103-106
• /
• 2006

Anthocyanins are water-soluble glycosides and acylglycosides of anthocyanidins, having different color variations due to its substitution patterns. Anthocyanins, present in various fruits, vegetables and crops as natural colorant, have been well characterized for its bioactive properties, anti-oxidant, anti-cancer, anti-proliferative and anti-inflammatory properties. During extraction and purification, the factors, such as pH, temperature, oxygen, light, enzymes, nucleophilic agents, sugar derivatives and co-pigments, have affected on anthocyanin stability. For this reason, the extraction method should be thoroughly checked for the qualitative/quantitative analysis of anthocyanin in particular plant material. To identify the optimum extraction method of cyanidin-3-glucoside, major anthocyanin of dark purple-colored grains, Oryza sativa cv. Heugjinjubyeo, Phaselous vulgaris, Phynchosia gngularis, Sesamum indium, Rhynchosia nulubilis and Lablab purpureus, reversed-phase HPLC analysis using solvent system of acetonitrile, methanol and water were accomplished.

• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.138-146
• /
• 2009

The crude polysaccharide fraction from fruit body of Auricularia auricula were obtained by using hot water extraction and ethanol precipitation. As the crude polysaccharide fraction contained the brownish dark colored compounds, the adsorption study of pigments from the crude polysaccharide using activated carbon was carried out. The pigment compounds showed an absorption characteristic with $\lambda_{max}$ of 230 nm and the absorbance at 230 nm was taken as color intensity. Adsorption capacity of pigment depended on increase of the activated carbon to sample loading ratio. The adsorption capacity increased with increase of pH and temperature in the pH range of 3.0-7.0 and temperature range of 25-40$^{\circ}C$, but decreased in the temperature range of 40-70$^{\circ}C$. The optimum capacity was obtained at addition of 16.7 mg activated carbon per mL sample solution (concentration = 3 mg/mL) at pH of 7.0 and temperature of 40$^{\circ}C$. Treatment for 10 min was sufficient to achieve the 80% decolorization and 1.25 fold purification of polysaccharide. Langmuir isotherm and pseudo second-order kinetic model provided the best fitting for adsorption of the brownish dark colored compounds onto powdered active carbon. The activation energies of adsorption from the Langmuir isotherm parameter in the ranges of 25-40$^{\circ}C$ and 40-70$^{\circ}C$ was -2.54 and 4.38 kcal/g, respectively. The results of low activation energy also indicated that the adsorption process was a physical adsorption which was controlled by diffnsion.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.201-206
• /
• 2007

The demand of L-arabinose has been increased recently because of its advantages including clinical effect. L-arabinose can be produced from dilute acid hydrolysis of agricultural wastes. In this study, optimum conditions of L-arabinose production using dilute acid hydrolysis of agricultural wastes and nutshells were determined. Among the tested various agricultural wastes and nutshells, corn fiber was selected as the best raw material for the production of arabinose. The highest arabinose production was achieved an acid hydrolysis of corn fiber for 1 h at 130$^{\circ}C$ with 0.4% sulfuric acid. Above optimal conditions, it was obtained 20.1 g/L glucose, 10.1 g/L xylose, 7.8 g/L arabinose and 1.8 g/L galactose from 90 g/L of corn fiber. For the purification of arabinose, it was carried out to remove all of sugars except arabinose by the Candida tropicalis cultivation of acid hydrolyzate and an organic contaminants such as pigments by the active carbon treatment of fermentation broth. Moreover, experiments were carried out to eliminate an ions by exchange chromatography. Finally, we obtained 3.1 g of partially purified L-arabinose powder with about 40% yield by evaporation and vacuum drying.

• Applied Biological Chemistry
• /
• v.30 no.4
• /
• pp.335-339
• /
• 1987

This study was carried out to investigate effects of fat-soluble solvents on the purification against nan-saponin substances such as chlorophylls and other pigments and on the yields of saponins in separating saponins from ginseng root, leaf and stem. Ginseng root saponins were effectively purified by various fat-soluble solvents while ginseng leaf stem saponins were by chloroform. And alternative extractions of ethyl acetate, ethyl ether, chloroform and benzene there more effective for ginseng leaf stem saponins than that by any single solvent. Contents of crude saponin fractions and total ginsenosides in ginseng leaf were $18.5{\sim}19.5%\;and\;10.8{\sim}11.4%$, which were very high compared with $4.6{\sim}5.1%\;and\;2.0{\sim}2.6%$ in ginseng root or $2.2{\sim}2.5%\;and\;0.63{\sim}0.67%$ in ginseng stem. Therefore, ginseng leaf is good resources for total saponin or $ginsenosides-Rg_1,\;.Re,\;-Rc,\;-Rd,\;-Rb_2\;and\;-Rf$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.151-157
• /
• 2000

This study was carried out to isolate and identify the maysin and related flavonoid analogues in corn silks. Silks were covered with silk bag to prevent pollination and were sampled at 3-5 days after silking. The silks were filled with 100% MeOH and stored at $0^{\circ}C$ until analysis. The MeOH extracts of corn silks were filtered and concentrated at 35-4$0^{\circ}C$. The ${CH}_2$${Cl}_2$ was added on the concentrated aqueous solution to remove the chlorophyll and lipids. The Cis open column (25mm$\times$54 cm) was washed and activated with serial treatment of 500$m\ell$ of 100% MeOH(twice)longrightarrow75% MeOH longrightarrow50% MeOHlongrightarrow30% MeOHlongrightarrow100% $H_2$O(2 times). The concentrated aqueous solution was applied to the $C_{18}$ column and washed with $H_2O$ several times to remove the sugars and water soluble pigments. Neochlorogenic acid, chlorogenic acid and 4-caffeoylquinic acid were eluted with 10% MeOH, and rhamosyl isoorientin was eluted with 30% MeOH, but maysin was eluted with 50% MeOH from the $C_18$ open column. Collected fractions were analyzed with HPLC by using revers-phase Ultras-phere $C_{18}$ column (4.6$\times$250mm, 5$\mu\textrm{m}$) and $H_2$O (10% MeOH containing 0.1% $H_3$${PO}_4$)/MeOH (100% MeOH containing 0.1% H$_3$PO$_4$) linear gradient from 20% to 90% MeOH for 35 minutes, a flow rate of 1 $m\ell$/min and detection at 340nm. The selected fractions were concentrated and applied to the silicic acid column. Maysin was eluted with 500$m\ell$ of 100% ethyl acetate from the silicic acid column for the first purification, and the purity of collected fractions was about 75%, but the purity from the second purification with the Cis column (1/2 $\times$ 43") was greater than 95%. FAB-MS spectral data was obtained with VG7O-VSEQ VG analytical fast atom bombardment mass (UK). $^1$H-NMR and $^{13}$ C-NMR data were obtained with Bruker DPX 400 MHz NMR spectrometers (German) in DMSO-d$_{6}$ at 400 and 100 MHz, respectively.vely.