• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.168-168
• /
• 2000

In this paper, a boiler control system for thermal power plant is configured. The boiler control system for thermal power plant is largely composed of an ABC(Automatic Boiler Control) system and a MBC(Mill Burner Control) system. ABC system controls analog process values, so almost all analog control logic is dealt with in ABC system. On the other hand, MBC system relates to sequence control logic such as MFT logic, Furnace Purge, Safety related logic. Advanced control systems made from advanced countries deal with an ABC system and MBC system in a distributed control system. In this paper, we adopt a DCS as an ABC system and adopt a PLC system as a MBC system to configure a boiler control system for thermal power plant using domestic control system. Finally the validity of the configured boiler control system is shown via simulation using digital simulator for boiler system in thermal power plant.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.653-660
• /
• 1996

For oxygen PSA process development, adsorbed amount of oxygen and nitrogen on various adsorbents were measured corresponding Langmuir isotherm parameters were measured. A reasonable adsorbent for oxygen process was selected based on the effective adsorbed amount. The PSA process consists of adsorption, desorption, pressurization, purging and pressure equilization steps. Adsorption pressure was about 2 atm and desorption pressure was between 120 torr to 400torr. Cycle time of 2-bed PSA process was 80 seconds and that of 3-bed oxygen PSA process was 180 seconds. In order to compare and analyze operation characteristics and economic feasibilities of 2-bed and 3-bed oxygen PSA processes, productivity, oxygen concentration and recovery were compared and the effect of purge and pressurization steps on the performance of PSA processes were analyzed. For the commercial scale oxygen PSA process, capital and electricity cost were estimated. In the range of $O_2$ production less than $700Nm^3/hr$, the 2-bed process is conformed more feasible in economic view point.

• Laser Solutions
• /
• v.18 no.3
• /
• pp.1-5
• /
• 2015

A 3D printer based on laser powder deposition (LPD), also known as DED (direct energy deposition), has been developed for fabricating metal parts. The printer uses a ytterbium fiber laser (1070nm, 1kW) and is equipped with an Ar purge chamber, a three-dimensional translation stage and a powder feeding system composed of a powder chamber and delivery nozzles. To demonstrate the performance of the printer, a tapered cylinder of 320mm in height has been fabricated successfully using Ti-6Al-4V powders. The process parameters including the laser output power, the scan speed, and the powder feeding rate have been optimized. A 3D printed test specimen shows mechanical properties (yield strength, ultimate tensile strength, and elongation) exceeding the criteria to employed in a variety of Ti alloy applications.

• Preventive Nutrition and Food Science
• /
• v.19 no.4
• /
• pp.314-320
• /
• 2014

Flavor quality of Liriopis tuber tea that was made using a steaming process was studied by measuring changes in headspace volatile compounds. Headspace volatile compounds of the prepared samples were isolated, separated and identified by the combined system of purge & trap, automatic thermal desorber, gas chromatography, and mass selective detector. As steaming frequencies were increased, the area percent of aldehydes decreased from 32.01% to 3.39% at 1 and 9 steaming frequency times, respectively. However, furans and ketones increased from 18.67% to 33.86% and from 9.60% to 17.40% at 1 and 9 times, respectively. The savory flavor of Liriopis tuber tea was due to a decrease in aldehydes contributing a fresh flavor at the 1st steaming process and newly generated furans from nonenzymatic browning with repeated steaming frequencies. These results will provide basic information for quality control of the newly developed Liriopis tuber tea.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.9-18
• /
• 2002

Thermal humidity characteristics were considered theoretically and experimentally. A Simply well-fitted correlation of a saturated vapor pressure-temperature curve of water was introduced based on Antoine equation to make theoretical prediction of relative humidity according to temperature variation. Characteristics of dew point were also examined theoretically and its relation with temperature and humidity was evaluated. The exact mass of water vapor in a specified humidity and temperature condition was estimated to provide useful insight into the idea about how much amount of water corresponds to a specified humidity and temperature condition in a confined system. A simple but well-fitting model of dehumidification process was introduced to anticipate the trend of relative humidity level during GN2(gaseous nitrogen) purge process in a humidity chamber. Well-suitedness of this model was also verified by comparison with experimental data. The overall appearance and specification of two thermal humidity chambers were introduced which were used to perform various thermal humidity tests in order to yield useful data necessary to support validity of theoretical models.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.296-301
• /
• 2009

An inductively coupled plasma assisted atomic layer deposition(ICP-ALD) system has been constructed for the deposition of ZnO thin films, and various experiments of ZnO thin films on p-type Si(100) substrates have been carried out to find the self-limiting reaction conditions for the ICP-ALD system under non-plasma circumstances. Diethyl zinc[$Zn(C_2H_5)_2$, DEZn] was used as the zinc precursor, $H_2O$ as the oxidant, and Ar as the carrier and purge gas. At the substrate temperature of $150^{\circ}C$, atomic layer deposition conditions based on self-limiting surface reaction were successfully obtained by series of experiments through the variation of exposure times for DEZn, $H_2O$, and Ar. ZnO deposition was repeated at different substrate temperatures of $90{\sim}210^{\circ}C$. As a result, the thermal process window(ALD window) for ZnO thin films was observed to be $110{\sim}190^{\circ}C$ and the average growth rate was measured to be constant of 0.29 nm/cycle. Properties of the film's microstructure and composition(Zn, O, etc.) were also studied. As the substrate temperature increases, the crystallinity was improved and ZnO(002) peak became dominant. The films deposited at all temperatures were high purity, and the films deposited at high temperatures had the composition ratio between Zn and O closer to one of a stable hexagonal wurtzite structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.818-821
• /
• 2003

Ozonic use of sterilization and heat treatment of raw material to extend the conservation period of food recently is increased by hard vegetable or microorganism sterilization purpose of fruit. If ozone can create as is easy comparatively because do air or oxygen by raw material and schedule period passes, there is advantage that do not leave the second contaminant because being gotten restored by oxygen. Also, because the effect is big to decolorization beside sterilization effect about microorganism, deodorization, disjointing of venomousness hazardous substance, food save, indoor air purge, good hand processing, hydrospace agricultural chemicals processing etc. the use extent is wide. This research ran parallel a sterilization experiment of E.coli colitis germs by ozone that manufacture ozonizer that use doped diamond maund electrode (BDD) by boron and searched special quality electrochemistry enemy of the ozonizer and is created. E.coli. After cultivate E.coli colitis germs during 37C 1 day is LB ship, after do ozonation, was sterilized more than 90% by ozone as result that examine sterilizing power by substance microscope and could confirm excellency of diamond electrode.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.607-610
• /
• 2003

Ozonic use of sterilization and heat treatment of raw material to extend the conservation period of food recently is increased by hard vegetable or microorganism sterilization purpose of fruit. If ozone can create as is easy comparatively because do air or oxygen by raw material and schedule period passes, there is advantage that do not leave the second contaminant because being gotten restored by oxygen. Also, because the effect is big to decolorization beside disinfection effect about microorganism, deodorization, disjointing of venomousness hazardous substance, food save, Indoor air purge, good hand processing, hydrospace agricultural chemicals processing etc. the use extent is wide. This research ran parallel a sterilization experiment of E.coli colitis germs by ozone that manufacture ozonizer that use doped diamond maund electrode (BDD) by boron and searched special quality electrochemistry enemy of the ozonizer and is created. After cultivate E.coli colitis germs during 37C 1 day is LB ship, after do ozonation, was sterilized more than 90% by ozone as result that examine disinfection effect by substance microscope and could confirm excellency of diamond electrode.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.121.2-121.2
• /
• 2011

Aluminum-doped Zinc Oxide (AZO) is considered as an excellent candidate to replace Indium Tin Oxide (ITO), which is widely used as transparent conductive oxide (TCO) for electronic devices such as liquid crystal displays (LCDs), organic light emitting diodes (OLEDs) and organic solar cells (OSCs). In the present study, AZO thin film was applied to the transparent electrode of a channel-shaped flexible organic solar cell using a low-temperature selective-area atomic layer deposition (ALD) process. AZO thin films were deposited on Poly-Ethylene-Naphthalate (PEN) substrates with Di-Ethyl-Zinc (DEZ) and Tri-Methyl-Aluminum (TMA) as precursors and $H_2O$ as an oxidant for the atomic layer deposition at the deposition temperature of $130^{\circ}C$. The pulse time of TMA, DEZ and $H_2O$, and purge time were 0.1 second and 20 second, respectively. The electrical and optical properties of the AZO films were characterized as a function of film thickness. The 300 nm-thick AZO film grown on a PEN substrate exhibited sheet resistance of $87{\Omega}$/square and optical transmittance of 84.3% at a wavelength between 400 and 800 nm.

• Journal of Environmental Science International
• /
• v.7 no.5
• /
• pp.615-622
• /
• 1998

The volatile organic compounds(VOCs) emitted from raw garlic and Kimchee were analyzed with thermal desorption or purge ＆ trap/gas chromatography/mass selective detection method. Very offensive compounds such as methyl allyl sulfide, dimethyl sulfide, dimethyl disulfide, diallyl sulfide, methyl allyl disulfide, diallyl disulfide and dimethyl trisulfide were detected, and among them, dimethyl disulfide and dimethyl trisulfide were confirmed to be generated during the precocity of Kimchee or emitted from the stuff of Kimchee other than the garlic. Malodorous compounds emitted from the garlic or Kimchee were detected in the breath of a Korean and the refregirator keeping Kimchee. It was confirmed that the disufides emitted from the garlic or Kimchee were major components of offensive odor in the alveolar air and the refregirator. It was clarfied that heat process is very effective to reduce odorous VOCs in garlic or Kimchee.